3M Flexible Abrasives

Product applications using 3M Flexible Abrasives sheets for primer sanding, paint preparation, and paint finishing with key product features

[@oscaralberzu3816]

ECXELENTE INFORMACION...MUY UTIL Y PRODUCTOS INCOMPARABLE.GRACIAS

[@davidr.massey419]

If sanding various resin molds what you really want is their old Dia Pads. Sure there not for intracritet tight corners, but for anything else they just can't be beat. They are 2&1/2" by 4" with small pattern stainless stl screens with diamond dust impregnated. They are hand held. Work best with very light trickle of water as they are designed to pull paticulate from the pad and sand at a higher pace in mold finishing than anything else. These seem to last forever. They come in about 9 graduated micron grits. Priced a complete set( of nine) at about 14 to 23$ a pad upper rh corner MSC cataloge page 927 called "Flexible Diamond Hand Lap". I have found over the years of sanding composites your save hundererds of$$ on other sand paper or cloth.

[@SlaysTheDay]

i have ceramic fused to glass, i want to scuff the ceramic so i can paint it but not scratch the glass, what grit is best?

[@synthopianproductions3527]

where can I find this system in KOVAX??

[@wizardoz13]

better :)

[@parwindersingh8871]

please convert all video in hindi

[@bretgriffiths7563]

KOVAX is way better!!! I gave them a thumbs down!

[@wizardoz13]

KOVAX better :)

[@patocallaghan3648]

You forgot cheaper also

[@wizardoz13]

KOVAX better :)