3M™ Vehicle Wrap Cold stretch tech tips

[@nothingtoseehere293]

Stretching the distortion over the surface area of the mirror is much more important than leaving the tension at the edge. I'd post heat the first option over the second for results. Cold stretching is important with hoods and large surfaces but means nothing with compound curves. The limitations of the film are highlighted here. 2D and 3D collide in these instances. Stretch for consistency at the edges of the mirror. The less tension the better. Make sure the tension is at least a quarter inch past the cut point.

[@Charlene-xn8wy]

I have a question. The chrome on the car: If it pops out is it possible to pop it back in or do I have to use glue?

[@simonausten5925]

is it laminated?

[@nickmartino2839]

How about doing it in a heated space??would that be the most ideal situation??

[@PhilManning-x5b]

Very helpful 😊

[@3MCorporate]

Thanks for the positive feedback! 😊 We're glad you found the demonstration helpful. The cold stretch technique is a game-changer for vinyl vehicle wraps, making the application process smoother and more precise.

[@kramerb72]

3M = Billion $ Corporation & HQ Products

[@sychanvong]

Another 3m bs, still can’t fix the problem with the archive lines