Building a Desk Using Dowels for Drawer Slides // Woodworking // Instagram Builders Challenge

This is my finished product for the Instagram Builders Challenge, I decided to play with the drawer slides and use dowels instead of traditional hardware or square wood. I was surprised with how easy it was to do!
Thank you again to MLCS Woodworking for sponsoring this video. Check out their website for all you router needs. www.mlcswoodwo...
Free Building Plans - www.3x3custom....
Building the Drawers - • How To Build Simple Dr...
_____
MLCS Woodworking LINKS
Slot Cutting Router Bit - bit.ly/2RfpAQz
Router Table with X1 Fence - bit.ly/2RfwKUT
Can-Do Corner Clamp - bit.ly/2D5VXOu
1" Core Box Bit - bit.ly/2yyA0nI
Bench top Sander - bit.ly/2PVZAJE
AMAZON (Affiliate) LINKS
1" Forstner Bit - amzn.to/2EL5mgn
Bessey Klik Clamps - amzn.to/2ETyn9M
Japanese Ryoba Saw - amzn.to/2CF573D
Wood River Chisels - amzn.to/2D40Pnv
Flush Cut Trim Bit - amzn.to/2RaioVK
Figure 8 Table Top Fasteners - amzn.to/2qb0kPX
Countersink Bit - amzn.to/2D5c4vN
_____
FOLLOW
Website - www.3x3custom....
Subscribe - www.youtube.co....
Instagram - / 3x3custom
Facebook - / 3by3custom
_____
Links above are affiliate links, clicking on them helps me continue to make more projects :)
Some tools used in this video were provided to me, all opinions are my own.

[@70ragtop]

I love the look of all the exposed dowels. I wouldn't change a thing.

[@3x3CustomTamar]

Thanks so much!

[@that0guy9]

Yeah me too. At first glance I thought they were pinned tenons. I think it’s better that you used a contrasting wood it made it a feature rather than a defect.

[@3x3CustomTamar]

that0guy9 thanks!

[@benranes5213]

Kids are the best judges of our accomplishments. Thank you for the thoughtful, well crafted stuff...

[@3x3CustomTamar]

So true.

[@Jeffhuebner]

Love the contrast of the oak dowels!

[@3x3CustomTamar]

Thanks! One of my favorite builds

[@realjester]

Was thinking about making a drawers like this with square stock for the slides. I like dowels better. Thanks for sharing 👍👍👍

[@3x3CustomTamar]

Thanks! That’s how this idea came out. I was going to do square. And as I was thinking about how I was going to make the cut in the side of the drawer to match I saw my core box bit and thought round....

[@GEN3228]

dowels looks way better than nails, love'em

[@3x3CustomTamar]

Thanks!

[@luigirollo1816]

I loved this one, congratulations again. Thank you for it.

[@3x3CustomTamar]

Thanks so much!

[@-ZIO]

other than the drawer limit problem, I think the style is great. I like the contrast of the plugs and the drawer slides are super simple but very functional. Nice :)

[@3x3CustomTamar]

Thanks so much!

[@traktorworks3200]

you know what, one of the more outstanding efforts, design wise and presentation wise i have seen. one word. awesome

[@3x3CustomTamar]

Awesome. So glad you liked it

[@X3WorkshopDesigns]

Well butter my biscuits! That was an awesome idea! If I ever need to line something up I've been using dowels with the rockler dowel jig but that bit with the router and biscuits is top notch stuff tamar.

[@3x3CustomTamar]

Haha! Yeah! I was using a dowel jig on previous projects. This was waaaaay easier and quicker

[@lorichaulk5583]

I love the work done , beautiful dowels

[@3x3CustomTamar]

Thank you very much!

[@jerrymascorrojr.8319]

New phrase for it, not OCD, OGD Obsessive Grain Direction! 😂 Awesome modification idea! Thanks for sharing!

[@3x3CustomTamar]

Ha!!! Love it!

[@Badgerworkshop]

Looks stunning and lovely the slides

[@3x3CustomTamar]

Thanks so much!

[@wizardmaster6639]

Good job and please do not worry about making another video for the drawer stops - I won't have any time to watch them anyways - besides you will use it yourself and you already know when to stop pulling or pushing.

[@3x3CustomTamar]

Haha I ended up making one

[@konamanstudio2447]

It's a piece of artwork to so having the Dow coloring the holes decides character to it it doesn't hurt it keep up the great work cheers with a beer

[@3x3CustomTamar]

Thanks!

[@johnjames5020]

You've got skills!!

[@3x3CustomTamar]

Thanks! ☺️

[@Mr.Stacey-L-SCC]

This is really cool. I like the visible dowel plugs!

[@3x3CustomTamar]

Thanks so much!

[@Stephen8454]

Time-lapse is so satisfying (drool face)

[@3x3CustomTamar]

Glad you like it!!

[@raemunroe]

You say "Drawers" the same way I do...DRAWS! :)

[@3x3CustomTamar]

Finally!!! Ha!

[@josephdanderson5492]

Very cool, great job! I would love to build one like it or very similar.

[@3x3CustomTamar]

Thanks!

[@showlivemanagement3266]

Good by Italy 👏

[@3x3CustomTamar]

Thanks!

[@billmccaffrey1977]

Interesting concept for the guides, but I think you will have problems with the drawers sticking when it turn humid. Lots of ways to add stops.

[@3x3CustomTamar]

Thanks. This build it a few years old. Haven’t had any issues.

[@JimFleming1953]

Tamar, tell your OCD to be quiet! The desk looks great, and it's not too busy! 😉❤🌺🌺🌺

[@3x3CustomTamar]

Ha thanks! It doesn’t listen to me 😂😂

[@JimFleming1953]

@@3x3CustomTamar 👍❤👍

[@chuckjohnson4048]

Hiding your fastener holes hides the care and time you spent on this gorgeous project. Don't hide this feature, display it, it is a one of a kind design, be proud of it.

[@3x3CustomTamar]

Thanks! Yeah. I love it now

[@aaalwares726]

الافضل من غير كلام كتير

[@itsmetheuglykid]

That looks great!! Nice work.

[@3x3CustomTamar]

Thanks so much!

[@biglebowskee]

You dance much better than Chad Stanton. Sorry Chad.

[@3x3CustomTamar]

I don’t know who that is

[@biglebowskee]

@@3x3CustomTamar kzbin.info/www/bejne/bKKcm3hsp9uCjac

[@3x3CustomTamar]

Sean oh. That guy. Ha! Never knew his name 😂

[@KingsFineWoodworking]

Fantastic! You are a natural. Great woodworking with a brilliant design idea. And your clarity in teaching helps everyone learn. You are going to pass us in subscribers soon! :-)

[@3x3CustomTamar]

Thanks so much!

[@thebitsntipsfamily7879]

I love watching both her and your channel !! Having ADHD and trouble focusing you both help keep my attention! You both have given me some goals!

[@vincentferrari]

New Tamar drinking game: Take a drink every time she says "Droz." :) (PS: My mom says it that way, so it's cool)

[@vincentferrari]

Also I love the open look of the drawer cabinet. It looks amazing!

[@cdmurray88]

Lol, used to work with a friend in a restaurant: I literally thought that the cash drawer was called a draw for months because I work back of house; figured it was a term I didn't know, but really, she has a New York accent.

[@Dosbomber]

I was thinking some sort of New England accent... reminds me of Norm Abrams.

[@jsrocker1776]

@@Vallyrah but she doesn't say any other words funny. It's like someone told her that's the correct way to pronounce drawer and she makes herself say it that way.

[@beardedgremlin8117]

Damn I would be hammered in first 2 minutes lol

[@JmanRx81]

No, the dowel design throughout is fantastic!

[@pbgd3]

So an idea for the depthing would be to cut a blind key way down the center of the dowels. Then you could insert a dowel through the drawer into that slot and it would catch the travel to keep the drawer contained and form a rear stop.

[@CottonTailJoe]

Trying to wrap my head around draws instead of drawers.

[@3x3CustomTamar]

It’s just a New York thing 🤷🏻‍♀️

[@TonjaP]

Me too, she pronounces her Rs perfectly every other time except for drawer...

[@workingdad]

haha, good for a laugh. relatively new subscriber, but couldn't place any kind of accent till drawer, reminds me of Norm Abram. Be interesting to see different parts of the country what our region specific accent words are. Awesome desk for sure

[@3x3CustomTamar]

Daddy's work is never done thanks! I love accents. Ha

[@OldNew45]

Where in New York?

[@Beevreeter]

Very nice, I love the dowel concept for the drawer slides. If I may give you a small tip for future reference: Construct your drawer boxes so that the sides extend about 2 inches past the back of the drawer - The extended sides then can be sized to act as stops to prevent the drawer from going too far in to the carcase, and the added benefit is that the full interior of the drawer can be seen and used without pulling the whole drawer out of the frame. Also, rubbing a candle along the drawer rails and grooves ensures a super smooth drawer action.

[@PneumaticAddict]

Girl, this is one of the most amazing pieces I've ever seen!! I was so excited to see how it turned out and you did not disappoint. 👏 👏 👏

[@3x3CustomTamar]

Thanks so much Elisha! It’s so starting when crazy ideas actually work! Ha!

[@DavidParker]

The desk looks great! The dowel slides are genius and I actually really like the mirroring of the dowels in the joinery!

[@3x3CustomTamar]

Thanks so much! I appreciate that!

[@ralphcraig5816]

@@3x3CustomTamar I'm with Dave on that, and thanks for the work, I'm in the middle of a double book shelving system and you just solved an issue, just hope my work is somewhere near your fine effort...

[@3x3CustomTamar]

Ralph Craig thanks so much! Good luck with your project!

[@FJD333]

I also agree that it looks great as it is. Very nice work.

[@KarlBunker]

I agree. The visible dowels of the joinery "echo" the dowels of the slides, which serves both to emphasize them and to tie the whole thing together.

[@trkrieger1478]

I think all the dowels pulls the whole thing together. Looks amazing!!!

[@3x3CustomTamar]

Thanks so much!

[@chrisbaier6252]

agreed. they add more round dots to the overall square look of the desk, repeating the roundness of the dowels.

[@onedieingsoul]

Thank you for not using pocket holes. Haha.

[@3x3CustomTamar]

Ha! They have their place.

[@onedieingsoul]

3x3Custom - Tamar I completely agree. But when see every other KZbinr using them constantly, it both gets old and lets every do it yourselves think they can use them for everything. I personally think this looks better and is much stronger. So... thank you

[@3x3CustomTamar]

onedieingsoul when I first started I though my pocket hole jig was going to be the game changer for me. It was a for a while. Then realized I didn’t NEED them.

[@MintStiles]

Pocket holes are very strong and effective, that’s why people use them. In fact, they are MUCH stronger than going directly into the end-grain. You can see some very large commercial structures being secured with 1.5” thick bolts using the same principle as pocket holes. For applications here, the screw-into-end-grain joint is plenty strong, but pocket hole will technically be a stronger joint. I think a good doweling system is probably the best way to go, but pocket hole is a close second for me. M&T or dovetails are only moderately stronger but take much more time to do. Unless you are going for “that look”, you are better off with pocket holes.

[@judsonkr]

Pocket-Hole Snob.

[@MrBiggybit]

This channel should be called “why you need to invest into routers and bits”

[@3x3CustomTamar]

Haha yup! I love my router.

[@odw32]

If I had to choose only 1 power tool, I would choose to own a router. Not because it's the most practical or best productivity-increaser over handtools... it's just the most satisfying tool there is.

[@wiscgaloot]

My router is a Stanley #71 (look it up). No need for power tools at all to build fine furniture.

[@toolsarecool]

“....but I WANT to!!.... “Please don’t.” - I don’t know how many times those phrases were uttered in our house... 😂😂😂 Glorious work, I may have to make one for my son now. List... +1

[@3x3CustomTamar]

Hahaha! Glad it’s not just in my house. Have fun with it and share it with me please!

[@nelalvarez]

Love it .Great job.

[@Beevreeter]

Very nice, I love the dowel concept for the drawer slides. If I may give you a small tip for future reference: Construct your drawer boxes so that the sides extend about 2 inches past the back of the drawer - The extended sides then can be sized to act as stops to prevent the drawer from going too far in to the carcase, and the added benefit is that the full interior of the drawer can be seen and used without pulling the whole drawer out of the frame. Also, rubbing a candle along the drawer rails and grooves ensures a super smooth drawer action.

[@MojoPup]

Great ideas

[@DaxxTerryGreen]

@@MojoPup Agreed. I recommended using Delrin or other plastic dowels for that reason. Peace

[@MojoPup]

@@DaxxTerryGreen Love the contrasting wood of the dowels. The different wood tones turns a functional project into a very unique piece of functional woodcraft...

[@drivingmenots]

The bit at the end ... perfect!

[@3x3CustomTamar]

Hahaha.... real life....

[@RiaanOliver]

Real life, just perfect.

[@cliftonshultz2253]

If the dowels make it look too busy, flat front drawer fronts would be automatic stops.

[@marcobucci]

This is so good

[@3x3CustomTamar]

Thanks!

[@AndrewMcQuillen]

I love the way your son is totally not bothered about pushing the drawers all the way in and any one with even the mildest form of ocd (me included) is screaming at the TV "pull the drawers out" so thanks for doing it. And so that we can all sleep at night you have to show how you fixed it😀😀.The whole look of the project was fantastic and I love the dowel drawer runners and dowel covers they look very smart in contrast with the light wood.

[@3x3CustomTamar]

Hahahaha! It was killing me too! I could just put a block or dowel or fender washer at the back of the dowel slides. But that won’t prevent them from being pulled all the way out. I think I have an idea that will work. And thanks so much!

[@ralphcraig5816]

@@3x3CustomTamar Laughed at the OCD remark concerning the alignment of the dowels, as you were placing them I wondered if that would come up, and it did! Now, I would have run the grain on the dowel 90 degrees to the grain on the leg, draws more attention that way...

[@3x3CustomTamar]

Ralph Craig Ha! It’s all in the details...

[@eodrsp]

I wish my wife shared my woodworking passion. I'd give anything to have her in the shop with me.

[@3x3CustomTamar]

My husband has zero interest. But it’s better off this way. Ha.

[@dondutra3086]

Tell her you want to make a storage system for all her shoes and purses, but you need her help lol

[@MikelNaUsaCom]

Take care for what you wish... because sometimes it comes true.

[@IronGordon]

Very creative I love the look great work!

[@3x3CustomTamar]

Thanks so much!!

[@robharper2155]

now thats really a good idea ! now im not going to throw away 8 - 16 " dowels leftover from project. _ thanks sort of...

[@stevesoldwedel]

"Glueing and Screwing" sounds like a t-shirt slogan.

[@عبدالرحمانابننافع]

beautiful woodworker, beautiful mother, god bless your family respect from Algeria 👍👍👍

[@bluerapper1]

I wouldn't make any stoppers, so I can pull the drawer completely, to clean it

[@DarkMoonDroid]

Little dowels on the back, top edge that are not glued in will secure it and be easily removed for cleaning. Same with the back. Little dowls to stop it from going all the way back, but removable so you can push the drawers out of the back to pull the other dowels out. Making extras and making them all the same size will insure it won't get messed up if you lose a few.

[@micah_lee]

Atleast stoppers in the sense to make it where it doesn’t push in past where you want it to go and shove it into the wall

[@jackmoler9271]

Adding to the dowel. If you place a smaller dowel at the back of the drawers, inside and out, then the drawers would not pull completely out and would only go in just so far.

[@t0cableguy]

I was thinking the same thing, but was just thinking a square block, but your idea would keep with the dowel theme.

[@l8trh4ter]

Running all the dowel end grain in the same direction is the sexiest thing I've ever heard.

[@scottjones5013]

Take that Diresta

[@3x3CustomTamar]

😂😂💪

[@constantinosschinas4503]

diresta is the worst builder in terms of aesthetics in whole youtube. no comparison. she is light years behind.

[@a0flj0]

@@constantinosschinas4503 Matter of taste. Some people appreciate an industrial look.

[@JedidiahShultzIrishCraftsman]

Dang you’re a genius on those slides!!! A real female Diresta!!😁😊 beautiful work Tamar!!👊👍

[@3x3CustomTamar]

I’ll take it!!! Thanks so much jedidiah!!

[@JedidiahShultzIrishCraftsman]

😁😁 you’re very welcome!!

[@ctvwrest]

Definitely not too busy! Love the design thank you very much!

[@3x3CustomTamar]

Thanks so much!

[@futureboy7653]

It's drawer, not "draw"... Think "door", but add an "r" after the "d".

[@3x3CustomTamar]

Not where I’m from

[@3x3CustomTamar]

R F yeah. It’s really annoying when people have accents.

[@futureboy7653]

@@3x3CustomTamar Well, to be fair, there are "accents", and then there are "entire regions of people saying words wrong". It's not necessarily the same thing.

[@darrylbl11]

You've obviously have never seen the original king of woodworking how to. Norm Abram. He started it all and always said draw or drawl.

[@TheEdsousa]

you use some techniques that I like a lot. I learned a lot by watching your videos

[@3x3CustomTamar]

Awesome to hear!

[@pappytron]

A "common sense" approach to woodworking. I don't know if society is ready for that...but it is refreshing to see. A lot of good ideas on alternative ways to accomplish what you wanted to do...I'll probably even try some...hehehe. The dowels are the perfect accent to the joints. I wouldn't change a thing with them. Thank you for a nice, easy build.

[@3x3CustomTamar]

Thanks so much!

[@danielgeng2306]

You have very innovative ideas, great build ! I’d keep my toys in it as well ! Lol

[@diyhuntress]

You seriously blew my plans out of the water! Your desk is so much cooler than mine! Killed it, girlfriend! 💕

[@3x3CustomTamar]

Your plans were the perfect fit for this design! 🙌🙌 Thanks!

[@MichaelAlm]

Really nice design Tamar! I love the way you created the dowel slots in the legs. Well Done!

[@3x3CustomTamar]

Thanks so much Michael! It was fun to figure out!

[@DeadlyDiddly]

Easy project-- *if* you have a workshop with thousands of Dollars-worth of power tools. 🤣

[@3x3CustomTamar]

Don’t let the lack of tools stop you from making something.... I didn’t start out with all these tools.

[@johnboleyjr.1698]

I was thinking instead of using biscuits, you could have extended the dowel theme by using dowels to join the top. I actually love this idea by the way. I had thought of using dowels for a center guide rail on the bottom of drawers, but this is just too cool. Especially the exposed dowel rails on the side. I think I'm doing this for the desks I have to build for the family. Thank you for this idea.

[@3x3CustomTamar]

Awesome. So glad you liked it. It was really fun to figure out

[@TheSeancassady]

Did you put any sealer or wax on the dowels and the recessed area the dowels slide in to aid in the movement of the draws?

[@3x3CustomTamar]

I put wax on them

[@---yu4ff]

Working in the shop with your jewelry on will cost you your jewelry, your finger or both.

[@Poor_Mans_DIY]

Absolutely brilliant build! I have never seen anyone use dowel slides! Just had to subscribe so we could watch and learn more. On a side note - welcome to the OCD family.

[@3x3CustomTamar]

Ha! Glad to be part of the club 😉

[@solitosolo6941]

MI AMORCITO TE HACE FALTA ALGUIEN QUE TE AYUDE !!!!!! Alguien asi como yo. Jijiji.. BESITOS PARA TI ...

[@cahayabintang2088]

*🔘I like itsss...💓👍👍👍* Chanel yang sangat bermanfaat dan Terima kasih atas ilmunya yang bisa dan sangat mudah untuk dicontohkan. Harapan..Semoga sehat dan sukses selalu. *From : Indonesia.*

[@wandererviv]

Amazing build, so inspiring! You make it look so easy, yet include all the failures which is exactly what us newbie woodworkers need! My favorite part though is your interaction with your kiddo!

[@rickhuttono1]

NOPE !!! NOT OCD... Its called being a Perfectionist... All professionals and Artist must ACHEIVE this level... Setting grain directions to match is proper procedure... Those who don't consider this step make lousy products... 45 years in Custom Wood Work... Quality Is Key To A Successful Business... ~~~~~~~~~~~~~~~~~~~~ Did you know your measuring tape can tell you when it's time to retire ? Stretch your tape out across the floor to 90 inches ( 80" for men )... If each inch represents a year of your life, how many inches of life do you have left for enjoyment? Or will you work your life away, inch by inch... The visual perspective of a life span, via a measuring tape, will freak you out... Note: Full retirement Sucks.. Unless your doing something exciting... Like sailing the globe for instance...

[@fouroakscrafts7240]

Very creative design with the dowel slide! I don't think I've seen that used anywhere else. Very nice video -- well done!

[@3x3CustomTamar]

Thanks so much! I haven’t seen it either!

[@nafeaharbi8968]

Thank you 🙏🏻 شكرًا لكي للمجهود الرائع الذي تقدمينه 🙏🏻🌹🙏🏻

[@karlpopewoodcraft]

Great looking piece, I love learning new skills from channels like this that I can take forward into my projects. Thank you for sharing your experience 😊

[@3x3CustomTamar]

Awesome. So glad you liked it

[@jameskleist4019]

I think you did a great job. 👍😁 Plus you are a good problem solver and you solved 1 for me. Some people (men) think that women can't do stuff like you just did, but read Proverbs 31:10- 30 and get praise for your self. You fit the scriptures sited.

[@gmortimer20031]

Once upon a time, even over here, beautiful women were expected to be very good at the sort of thing you do. My mum listened to the motorbike my mate turned up in and gave it 30 miles. It managed 40. She could shoot a .303 (a .308 to you) at 500 yd and hit five bulls. She is 95, I am 61. So no young bride. Choosy. I would not be lost in admiration for you, even though you inspire me, I would just assume you could do those things. My mother made my clothes, perfectly, on her treadle-powered sewing machine. Once she put a needle through her finger, right through the bone, while repairing it. In the toolbox that came with the machine, a pair of pliers, which she used to remove the needle. Reclamp it, and continue to sew. Having, in the meantime, discovered and repaired the fault. Elastoplast preventing staining of the piece with blood.

[@paulsotheron710]

I watch a lot of your posts and, as a layman, am fascinated at the accuracy and beauty of your projects. Personally I like the look of the screw plugs. Wish I had your skills. 👍

[@3x3CustomTamar]

Thanks so much! The look grew on me 😉

[@furia58]

very good job, you are creative

[@brianweekley5700]

That's a nice look. Well done! However, the word drawer has an "r" at the end. LOL

[@3x3CustomTamar]

Not where I’m from. Ha. Thanks!

[@mohammedsedeek9553]

Thank alot for your ideas and effort. Would you tell the measurements of all pieces to build up this disk. What kind of wood we can use. By the way, As wood has beauty and emotion you have beauty too. 😁😁😁😁😁 😍😍😍😍😍

[@malabarista2023]

Sos una chica bella y muy aplicada! Excelente carpintera!!

[@LitoGeorge]

Hi Tamar, great idea and execution. I'll admit, you're a more skilled and fancier woodworker than I am! Given this 4 years ago, could you tell me the name of the video where you show the depth stops for the drawers please? TX

[@Wood_Vibe_77]

jak nazywają się te niebieskie ściski

[@mojo6524]

IMHO, if you're going to go through the trouble of using dowels for drawer slides, the dowel plugs are mandatory, which ties the piece together nicely.

[@azmike1956]

I really appreciate your talent & use many of the same techniques as you but please use some sound attenuation. Your vid's will be easier to comprehend. I have the same situation by running a home shop that is not allowed where I live. Just a thought!😊👍

[@rickdees251]

It could be suggested that wax applied to the dowels and the grooves they mate with to prevent binding and reduce friction. Women should be allowed to be carpenters. So women can learn how to saw though their fingers like men do. I definitely give that a "half a thumb's up" for equality.

[@ellena.8369]

OMG finally, a video addressing OTHER solutions to use besides drawer sliders, like how is this the only one?!?! Genius, it's thrifty and easy! THANK YOU!

[@3x3CustomTamar]

So glad you liked it!

[@timpedzinski230]

Aside from the draws vs drawers issue my comment is those are the biggest 1/2" dowels I have ever seam. Actual if you'd used 1/2" dowels it wouldn't work. Better to use the 1" dowel as it is less likely to let the draw fall off track.

[@BronkBuilt]

Great design. I actually like the dowels showing.

[@3x3CustomTamar]

Thanks! I like the front. Not the side 🤷🏻‍♀️

[@joec96]

SUPER Nice!! How many tooth blade do you recommend for plywood cuts?

[@travelliving2004]

I would like to work with u....

[@bobsradio6025]

Great looking project! Great looking wedding ring too, but I learned the hard way to take mine off when working in the shop. Be careful!

[@lfwhyd]

i like you because you always make hard and expensive things and simple (bisquit)

[@hawsug4614]

I might have considered slightly shorter drawers inside their side panels so that you're less inclined to pull them out their full length. Or better still, use some of that innate ingenuity of yours to create "extending" tubular/dowel slides.

[@almirsilva7913]

Ficou muito lindo, parabéns sou hobista e quando eu conseguir fazer uma bancada como está estarei ótimo, um abraço.

[@robertkat]

To mutch work. Use the ball bearing glides. They hold 50 lbs and pull all the way out.

[@tharcisseilunga6658]

Your are wellcome.

[@dwaynecain5608]

Great job young lady. Since the glues and epoxies today are so strong there are many many people that we see that are using no dowels or biscuits anymore. For the long term strength of your project you made a wonderful decision. The quality of your work speaks for itself. Great job.

[@3x3CustomTamar]

Thanks so much!

[@virtualhermit]

Nice build. Inspiration for simple dwauras for a wood tool cabinet! :)

[@markanthonyking]

My next project will be a “man” sized double dresser, any tips?

[@fabriziofabrizi5524]

Ciao Sei proprio professionale. Ma vai troppo veloce. Ciao Fabrizio 🇮🇹. 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏