4.3 TWIN TURBO V6 UNDER THE HOOD OF THIS LUV TRUCK AND SMASHED V8s!

FOLLOW ME ON SOCIAL MEDIA
FACEBOOK JMalcom2004
INSTAGRAM JMalcom2004
MAKE SURE TO CHECK THESE GUYS OUT FOR SICK RACE PARTS
HURON SPEED PRODUCTS
www.huronspeed.com
LEASH ELECTRONICS
www.leashelectronics.com/
MOTION RACEWORKS
www.motionraceworks.com/
SHOWTIME TRANSMISSIONS REBUILDS
[phone]
BIG T PERFORMANCE CONVERTERS
[phone]
EQUIPMENT USED
Panasonic GH4 amzn.to/2Skgg2h
GoPro Hero 4 Black amzn.to/2TlDG4n
GoPro Hero 5 Black amzn.to/2S0Zaak

[@clintonjohnston2970]

4.3 Chevy was one of the best or maybe the best v6 ever built, basic, plain and simple easy to work on and very tunable.

[@FLINTmitten810]

That thing is an absolute ANIMAL!!! That launch is unreal!!! And the guy knows how to drive too! People’s biggest mistake is not letting off the throttle. He effortlessly wheelied, let off gracefully, and came back into it. Props to whoever’s truck that is.

[@deenut2927]

The Driver though!!! That luv got plenty of love ❤️

[@AirborneRenegade]

4.3 has always been a sleeper in my eyes. It just takes knowing what to do to them.

[@goodgollyjosh]

And being able to secure the obsolete parts for them like Bowtie blocks and billet cranks.

[@user-hd4wf5gq8r]

Way more tunable than the Camaro V6 tbh

[@lawrencecoleman7850]

I believe the Grand National had a 4.3 engine with a single turbo and they are fast as hell

[@noahdomerese3034]

​@@lawrencecoleman7850 the grand national actually had a single turbo 3.8 in it. It was the GMC syclone and typhoon that's had a single turbo 4.3. Stupidly fast trucks for that time

[@lawrencecoleman7850]

@@noahdomerese3034 I knew that the typhoon and syclone had the 4.3 and I thought the Grand National had the 4.3 also

[@donj.6572]

Mark is a good friend of mine. He’s had that truck since he was 16. I’ve seen it go through a few changes in blowers over the years but once he went turbo…DANG! That’s a scary little truck there.

[@Squintz45]

It was scary with the little B&M blower and no seatbelts with 225/50s on the back lol. I miss Griffin, never thought I would say that.

[@jamesstewart9307]

Needs a video of it let us know the build it's kik ass

[@jamespepper2541]

It has horsepower a lot of those small blocks have minus some of the weight and that equals C-YAAA!!! 😎

[@TOMONAGE]

This is awesome. Any idea where we can get detailed info on his engine build? Would really like to know what heads and if its an even fire balance shaft motor.

[@Whatsupeiththestupidhandlebs]

Mark is a friend of mine. He and his dad Frank run Frank’s head and engine service in Griffin, Ga. I’ve seen that truck go through many changes over the years.

[@herbertvaughaniii8550]

That LUV showed them what tuff LUV is he rolling

[@cliffordcullen1687]

Makes me want to do something with the one I had built a few years back. The perimeter bolt valve covers look like the ones I’m running which leads me to believe he may have Brodix heads. My 4.3 V6 is actually a 298ci Stroker with a billet Scat 3.875 inch even fire crank, Scat H beam rods, Racetek forged .040 over pistons. 1989 non balance shaft block with steel 4bolt main caps. Brodix 210 heads, ARP studs throughout. That’s the basics. Wasn’t cheap to build but it halls ass for a NA V6. Can’t wait to turbo it.

[@jalf7095]

Where did you get that stroker crank for your v6

[@ScrewHeadJuNgle]

When yo turbos are twin, yo ass gone win!

[@workinmanwhipswmw2514]

Those twins are workin J low 5 second truck if he can keep it on the ground

[@79tazman]

The 4.3 V6 is really a 350 SBC with two pistons missing but the bore and stroke is the same as a 350 cu in SBC and if you get the later Vortec engine the heads are the best stock head on the market but if you port it and put bigger valves in them they work great for cast stock heads.

[@charlestgjohnson3564]

Badass little truck there🔥🔥🔥👍

[@HeathersHusband8387]

that's a Georgia truck! I used to live in GA before I moved to Kentucky. but use to watch that truck run at Atlanta motor speedway for Friday night drags. and that truck use to have a blower on it.

[@ThatTallGuy69]

That's what you call a three-quarter 350. But it's all business.

[@goodgollyjosh]

I wish it was exactly that. Unfortunately, that offset rod pin crank is a bit weak and the oiling system leaves the mains a little under lubricated.

[@tonyphillips528]

@@goodgollyjosh damn

[@Squintz45]

@@goodgollyjosh Common Pin/Oddfire Crank in that motor.

[@aztlannative162]

Straight 80’s vibes.

[@harrysatin5110]

Maaaan that white Malibu had Luv sitting there getting hot, and still left so late.

[@richard2428]

That's it I'm building a 4.3 its already apart

[@shrimpcomminup]

If it wasn't for life issues I would've been built mine but times are coming

[@codeack101wlck]

I've been having a blast glad you're joining our goofy asses i spent 5k on engine block n internals, just getting stuff mounted and the truck lightened up n ill be hitting the track good luck dude

[@richard2428]

Good luck fellas pray to see you on the track!!

[@blakemiles2522]

Me too just got online and went to summit racing to get most of the parts for the engine build for my Silverado single cab

[@stevefranklin9920]

Makes me wish I had my 4.3 TH350 Chevy Luv back!! Kept snapping stock rear ends though!

[@mcstench8913]

i would love to build my 4.3l in my truck, but i need a good daily so i aint touching it until i get another motor to play with

[@paulcleckley5998]

Turning some serious rpms!!

[@JefeLTX]

Dam can’t wait till go go boosted🔥🔥

[@SlickWilly79]

You got good taste in trucks brother 👌🏻

[@79tazman]

I know a guy running 4.3 twin turbo in his Vega and it's a screamer for what it is.

[@kylecurry6841]

Precisely why the Ty/Sy's were AWD lol

[@19jody72]

Gota love that!!

[@samuelgiddens7946]

That v6 is moving J Malcolm

[@CRUSHFACTORPC]

I had a 1993 S10 4.3 and it was a boss

[@aubreywhaley7729]

Can you feel the Luv

[@rodrickgriffin2012]

MAN I LIKE THIS LIL TRUCK, IT STUPID FAST, EVEN WHEN IT LIFT UP IN THE AIR, BUT IF IT STAY ON FOUR WHEELS WHEN IT TAKE OFF EVERYTIME, 💨💨💨

[@oldschoolsstressfull5062]

“Po lil Tink Tink “ katt Williams voice

[@brandonbrown5351]

Badass v6 fo sho

[@mr.fixit9015]

He driving that truck frfr

[@quintrelrussell4811]

Find out who's truck that is and let me know,didn't know 4.3 would be like that.Lol

[@shrimpcomminup]

One of the best kept secrets 🤫

[@chrisgermany5919]

Would a turbo 4.3 make a good engine for an okd Datsun 240z? Asking for a friend.

[@whosyourdaddy2drmafia382]

Dam 8sec 4.3 is not a joke

[@yooooo6296]

You don’t need 8 when 6 does it better 🔥

[@jamesharrison354]

He pulled around the S10 on 2 wheels 👀👀

[@FLINTmitten810]

I’d love to know what his times are & what the trap speed is. Anybody know? He’s gotta at least be in the 8’s

[@choppacity4348]

Got to Luv it 👍👍👍

[@antonioferreira2936]

Wtf thats ungodly insane

[@lawrencecoleman7850]

The black S10 was a good race for the luv

[@aquapneumatics]

Maybe has some weight aft of the axel under the cover.

[@lewisdeclouette6342]

Damn it boy

[@codeack101wlck]

I can't wait to finish my TT 4.3

[@TheMlc4life]

Look into the LV3 4.3L. Based of the new Chevy LT V8.

[@codeack101wlck]

@@TheMlc4life i like the block out of my 99 tons of performance parts that fit a small block v8 bolt on to the 4.3 everything is the same except missing 2 cylinders

[@samueljackson2478]

Image the Luv truck coming back with a 4.3V6 or a S10 twin Turbo

[@thereflectionartist]

Nasty

[@clydebethatway7485]

Love hurts

[@jermainesmoot1230]

Omg that luv is the truth

[@shawn081082]

How much rowdy do you want? All of it.

[@bellwethertrucking3650]

Has anyone ever tried to de-stroke a turbo 4.3?🤯 The rpm would be insane! It'd probably redline around 7,000 maybe higher, depending on how much you decreased the stroke.

[@km6832]

A shorter stroke doesnt automatically result in a higher redline the engine has to be designed to be high revving from the jump. A cam is what raises rpm redline, a shoter stroke just happens to help along with that cam

[@aubreywhaley7729]

Pissed off vacuum cleaner!!!!!

[@jeffp7958]

That’s crazy.

[@eddiepatterson5025]

I’m surprised that he doesn’t have wheely bars on it. He’s leaving hard.

[@codeack101wlck]

The bars would limit the truck to the unlimited class only, thats why most don't put bars on, guy just needs to tune his suspension, or spend more money on better shocks

[@brockmoore2198]

What intake y’all runnin on the 4.3? I can’t find anything descent. Please help lol

[@staylebutler9135]

Race proven motorsports. They are in California. They have fabricated intakes

[@codeack101wlck]

If you want power you'll have to make your own custom intake manifold, otherwise modify an edlebrock intake for a carbed 4.3 there are only 2 options besides plastic stock

[@yuntypoch]

Try cutting down a tpi first intake reason for it the long tube helps for our rpm range application the other short runners won’t be that effective because they are meant for higher rpm is why ppl don’t see much gains they might as well keep the factory intake but the fast is perfect to low and mid power research it and see what I mean

[@DANOBILL]

Sorry for the late response but I think the best intake manifold is the eagle marine ones. They cost around $700 but have fuel rails and injectors already installed. Probably the simplest route too

[@calebsteck7183]

What's the transmission? Is it a 4.3 vortec block?

[@tripifi9303]

Blocks are same vortec or not, difference is heads

[@codeack101wlck]

@@tripifi9303 there are like 5 different blocks and maybe a couple I can't think of

[@lcee6592]

No ETs? Seriously need some bars! I would. Probably save a crash someday or breaking something from pedaling the throttle.

[@codeack101wlck]

Bars are for pussies and the unlimited class only

[@billfrench9218]

WHAT HOOD 😂😂😂😂😂😂😂😂😂😂😂

[@joshuajordan141]

That makes me wanna build the shit out my 4.3

[@jesvans]

BAD .... ASS !!!

[@naterally2176]

if you ever had one these are the biggest heap of shhh

[@eldiabloblanco8787]

Built 4.3 .....at least the bottom end....if not just give me enough numbers so I know you ain't lying

[@uglymechanics6599]

rods pistons valvetrain most likely. stock crank will start to bend around 550-600 crank but with these motors that's usually around 700ft lbs by then

[@mcintyretyler89]

Golly

[@plap.]

She hooks

[@b.k.sautomarinedieselrepai5143]

If shit it and get it was a truck..🤠

[@hotrod_kris9395]

BCG

[@Uniiiiii]

that mf bout ran out of sound god DAYUM!!