4 "Must-Haves": Don't Start Working on the Bench Grinder until you've done These Things

Рет қаралды 22,453

Күн бұрын

Let's speak about 4 'must have' things You Must Do Before You Start Working on a bench grinder
Bonus: Easy to make DIY Grinding wheel balancing fixture
📐 Download Free plans - mazaydiy.com/grinding-wheel-b...
👁‍🗨 3D CAD model - grabcad.com/library/homemade-...
▶️ How to install bench grinder and removing vibrations, balancing, faceplate and and so on:
00:00 Cheap bench grinder "from the box"
00:25 Balancing Grinding Wheels
03:01 Minimizing end-face runout
04:00 Truing grinding wheels
04:22 Secure a bench grinder
🔨 To make it I used:
Plywood Bench Vise - • How To Make A Bench Vi...
Sharpening stand - • 3 DIY Tool Sharpening ...
Drill Press Machine - • DIY Drill Press Machin...
➡️ Follow me - / mazaydiy
☕ Buy me a coffee - www.buymeacoffee.com/mazaydiy

Пікірлер: 28

@MazayDIY Жыл бұрын

DIY Grinding Wheel balancer free plans - mazaydiy.com/grinding-wheel-balancer/ 3D CAD model - grabcad.com/library/homemade-grinding-wheel-balancer-1 It's free, but you can thank me: ☕ Buy me a coffee - www.buymeacoffee.com/mazaydiy

@user-fv5uw2tq5m Жыл бұрын

ждём видео с разлётом круга по мастерской)

@Tome4kkkk 6 ай бұрын

Great stuff! And yes, the diamond dresser is the #1 tool to buy. I'd say even before ANY grinder! Nowadays even angle grinder discs are so off and unbalanced it hurts the hand. Don't count on them getting true "after you use them a bit".

@bobreese8831 11 ай бұрын

Jon asked about the safety of drilling the wheel, and whether it might be a risk. I’ve seen 2 alternate ways to handle that. The easier was to use a disk grinder with a masonry wheel on it, making shallow but wider cuts on the heavy side of the wheel. The more elegant way was a shop made washer to replace the stamped steel one, made with about 24 1/4” shallow holes around the inside face. You place small lead plugs into those holes to effect the balancing. None of this to take away from Mazay’s elegant solution to creating the balancing jig from scrap, and finding side to side runout with a pencil. Nicely done, Mazay!

@MazayDIY 11 ай бұрын

Thanks for the advice! I received several opinions that my balancing method is not safe, I answered them in detail here - www.homemadetools.net/forum/diy-grinding-wheel-balancing-jig-96887#post224138 Summary - it is better (safer) to use a different method of balancing by adding additional weights, rather than drilling, although this does not apply to the design of the balancing jig.

@fabiomerlin8820 9 ай бұрын

Smart ideas. Thank you for showing.

@user-rm3uk1qu1o Жыл бұрын

Ну диски типа подсотрутся, и опять что ли их балансировать??

@MASI_forging 11 ай бұрын

Great work as always 😄😄

@Pasque56 3 ай бұрын

Grande!!!👍

@algorithmusseinvater5878 11 ай бұрын

Good video

@mrpropper6590 Жыл бұрын

А круг не лопнет потом по калибровочным отверстиям?

@Donbass228 Жыл бұрын

Конечно лопнет😁😁😁

@liih Жыл бұрын

Да это слабое место, может при большом давлении на рабочую область и разлетется

@MrChertel Жыл бұрын

@@liih "большое давление" - это лом с размахом.

@liih Жыл бұрын

@@MrChertel или деталь, которую затянет под предметный столик, и создаст обратный удар

@alonedeice8554 Жыл бұрын

Лайк не глядя 👍

@olesyavitkova 10 ай бұрын

Диски на болгарку не балансируешь?А если серьезно, то я бы колхозил с прижимной гайкой, наверно можно вместо штатной поставить диаметром побольше, отметить положение когда она закручена до упора. И уже на ней, делать балансировочные отверстия.