4 Pioneer pro 6.5 and 2 pioneer pro 4" on 500rms

[@Mr13allin]

Handling that low mid. Sounds good

[@erik120719]

Got two poineer pro 6.5 and a ds18 4" and ds18 pro110 tweeters in each door , all on a nvx jad 900.4 now...love my mids nd highs,coming up a bit short with 3 15s on 8k tho, be time to double up the doors and add another jad900.4 lol

[@sirdonkey3001]

nice setup, what frecuency cut you use for mids? and for tweeters?

[@erik120719]

kzbin.info/www/bejne/moGte4mHjdmsnrM Cut the lpf on the 6.5s at 80hz hpf on em 5khz. The tweeters lpf is 3.5khz

[@erik120719]

Quite a bit more power now, put the nvx jad 800 in my wife's truck and usimg a skar rp150.4 now

[@sirdonkey3001]

@@erik120719 thanks bro

[@AuuGainz]

What amp are you using in this set up?

[@erik120719]

Nvx jad 800.4 , solid little amp

[@AuuGainz]

@@erik120719 nice man how do you have em wired up? Just tryna see cause imma get the same set up

[@erik120719]

@@AuuGainz I changed up a bit , I run 2 pioneer pro 6.5 , a ds18 4" , and a ds18 3" pro tweeter in each door. Channels 3&4 run all 4 6.5s , two in each door in parallel, channels 1&2 run the 4" and tweeters. The passive bass blocker that comes with the tweeter is hooked up with the 4" ( the 4 and tweeter is in parallel for 2ohm on channels 1&2). I use my avh 600ex s active crossovers, 6.5s run from 80hz- 2.5khz ( I think ,will look) and the 4" and tweet are crossed at 1.5khz and up . I quit using the pioneer pro tweeters, they can't take rated power, are expensive, and there is no recoil available. I use the ds18 pro tw120 bc u can buy a pair of coils for $12 and they take a few minutes to change out. You will cook tweeters regardless , haven't found any that last, but the pioneer midbass are the best I've used, they play low enuff to flap leg hairs and they take over rated power for years. I think the jad800.4 is putting down over 900 watts between all 4 chanel's.

[@erik120719]

@@AuuGainz I'm in the process of stripping my truck , will take another video before I pull the door speakers out if you want, it's ALOT louder than this video.

[@erik120719]

@@AuuGainz kzbin.info/www/bejne/qXm4pmCMl5qng7M Updated video and showing crossover settings