How to wire a 4 position rotary switch and how the terminals line up. In this video it is used for a 4 position blower motor switch starting with off then powering low, medium and high.
Пікірлер: 34
@HasanHRahman3 жыл бұрын
This was very specific and helpful. Thank you!
@joeyjohnson97652 жыл бұрын
I ordered this same switch, saving this video to use when it gets here, thanks!
@davidemoreo82763 жыл бұрын
Excellent! Thank you 🙏
@jonathanbrown92454 ай бұрын
Thanks mate, this is really helpful
@MrJimgillnm3 жыл бұрын
Thank You !
@luislarosa93063 ай бұрын
Thank you
@304crash2413 жыл бұрын
Thanks!
@HungNguyen-gl2xt Жыл бұрын
so good
@Ellensai2 жыл бұрын
I have 4 12v lights I want to switch from (off - all 4 - just 2). They're currently wired to all switch on together with a relay that switches with the car ignition. I don't want them always on when Im driving so I want to switch them. I can easily make an on-off switch for all 4 with the power leads and an on off from two lights to all four lights, but ideally I want it in one neat switch rather than 2. Would a rotary switch work for that?
@thelumpycam506 Жыл бұрын
Missed your comment from awhile ago but yes it would work. This switch has dual connection points where you can connect multiple wires to.
@simondetlefsen3607 Жыл бұрын
Thanks mate 👍 🇦🇺
@MuhammadSaad-sl3he3 жыл бұрын
V nice
@practicallabАй бұрын
good
@kalifatoina38927 ай бұрын
Comment récupérer son compte erajob quand on perd le mot de passe svp
@asefamarye758811 ай бұрын
Thank, how about 3 position connection?
@NikkexD Жыл бұрын
What about the ground cable? This is only for pos & neg, right?
@thelumpycam506 Жыл бұрын
This is a pass thru switch, it's not a powered or grounded switch. I used it to pass power thru and grounded the blower motor with a single ground.
@ericstraily83852 жыл бұрын
Can you rotate the switch all the way around, or do you have to go back through the options to get to position 0?
@thelumpycam5062 жыл бұрын
Not on this particular switch, you have to go back thru to 0. I’m not aware of any switches that cycle completely around but there may be some.
@ericstraily83852 жыл бұрын
@@thelumpycam506 Ok, thank you for your reply!
@md.mamunorrashid8744 Жыл бұрын
Wow
@shankarvaigankar811611 ай бұрын
Can u mount it on din rail. Please reply
@thelumpycam50611 ай бұрын
This particular switch is not designed to mount to a din rail directly, there may be others that are but none that I’m familiar with. You could fab up your own mount to the din rail and then attach this to the mount but you would have to get a little creative.
@rainbowforest092 жыл бұрын
Is that 3 pole switch?
@ebachy2 жыл бұрын
Nope, it is double pole controlling two circuits' on/off status, but it is triple throw because each pole can be directed to three different outgoing wires.
@wilsonjudy9515 Жыл бұрын
still confused
@stuartcotterill94753 жыл бұрын
How to mount it?
@thelumpycam5063 жыл бұрын
You can mount it a variety of ways, I took the black cover and placed it over the plate I wanted to mount it to and marked where the bolt holes were and the main hole. From there I just drilled and cut until it fit and mounted it in place. It’s different for each application.
@ebachy2 жыл бұрын
Thanks for the tip on removing the cover plate (metal looking with numbers) to access the holes. I may scuff it up moving the tabs to release it, but the end result will still look better than drilling screw holes through the cover plate, as I was thinking of doing!