4 Sundown Audio X 12 inch Subwoofers on 8000 Watts!

[@brentsounds]

Demo is at 4:00

[@305chevyboysp6]

What size battery I Do u have and charging system?

[@seansheldon]

Best setup I’ve heard and felt! Hits real clean!

[@frothyshoes]

Damn I only have one X12 in my car and it's loud AF. Cant imagine having 4 of them. Looks sweet, those bad boys are flexing hard.

[@vetwitdajays8069]

That roof flex is a thing of beauty

[@johnzuro4596]

Great presentation on your equipment. Very nice.

[@MrJoe478]

All around tight. Like the whole video bro. I haven't done a video but I have a 06 Yukon not the XL, 8 PRV 8's , 6 prv super tweeter,'s 4 Sundown X15's V2's, 80ah xs power bank, 1 270 mechman for the vehicle, & 1 400 for the bank alone, 2/0 runs from front to under vehicle, All SounDigital amps around 4 of them, but 1 SounDigital Evo-X 12k on bass, alot of stuff I didn't name but your system is on point as well.

[@brentsounds]

I know that thing is loud

[@NHLiveFreeOrDie]

Clean looking rig with a sweet system. Jealous. Awesome job bud.

[@brentsounds]

thank you man for real!

[@fleetwood7888]

That is a very clean setup, nothing over blown nice wiring. 👍

[@TheWjbrown37]

Great Job! Its nice to see a clean car for a change.

[@brentsounds]

i appreciate it man!

[@RodofAllTrades]

Yeah buddie! I bet that's naughty! This has always been a fun and rewarding hobby, 32 years and running - I can't seem to escape it!

[@brentsounds]

It’s is a fun hobby!

[@JDRTRM]

Play - Quad Force Bass Challenge, the bass drop test . Old stuff but always never disappointed!

[@lunam7249]

"bass from hell" - quad force

[@bobdude2360]

Clean setup man that thing really moves some air you should put a aftermarket radio in there maybe a pioneer or a Kenwood. Well keep up the good work and God bless you and your family 🙏 out and keep bassing on.

[@brentsounds]

Planning on it soon, Thank you brother🙏

[@thenewguybas]

Awesome setup. I'm confused why you'd have all of that in there just to keep the factory stereo?

[@brentsounds]

Didn’t care to much about it before speakers wanted to do subs first. I will be doing one eventually

[@stevemaniaci4750]

Nice set up ,thank for the heads up an the shorter belt from ac delco i have a mechman 390 for my chyrsler 300 limited . Ready to install for my 3 lithium bat.s looks lile your hits good dude.

[@BASSLIFE4EVR187]

Nice as hell bruh i really love that setup u did an amazing job on that bro nice

[@elcarlos530]

One clean setup man! Hope to see more brotha 🚗🔊🔊🔊🔊🤘🏽😎🤘🏽

[@brentsounds]

i appreciate it bro fr, will be keepin updated❗️

[@charlestwhitfieldjr8096]

I have the x15 and I am planning on upgrading my amp and door speakers and wiring what is the best set up for a 2013 buick lacrosse

[@brentsounds]

Find you a set of 8” midranges put em in each door with tweeters in each door. Get all OFC wiring and see what your voltage is like!

[@The_secret_truth444]

Bad ass set up bro!!

[@brentsounds]

Thanks man!

[@psycobone1]

Very nice ! 👌 everything is perfectly done ✔️ and BOOMING 💥 💥 💥 💥

[@RGB-Reactions]

I love the rebasses from EXCLUSIV Channel.

[@chatobalencian1504]

Damn nice bro any particular reason why u still running factory head unit and how's your voltage holding up Im going to do something similar just haven't decided on what 4 12s 3 15s or 2 18s I'm looking for more spl as well and I have a DD M4 but I'm going to upgrade to a surge 10k or ruthless 10k just curious how steady ur voltage is

[@tonyfoley9988]

Clean setup, really nice. GREAT JOB BUD!! 👍 👌

[@brentsounds]

Thanks man!

[@kitanul788]

@@brentsounds SPL?

[@lifewithdamon105]

Nice set up

[@brentsounds]

appreciate it!

[@jlabovejr]

Those Sundown subs beating harder than a sundown town!

[@ceciljones1248]

Thanks for showing me this my voltage in park at full tilt is 14.6 to 14.5 only drops when I'm stopped at a red light probably because of the load on the engine?

[@brentsounds]

my tahoe idles at about 600 RPM so i can stay above 13.3 at idle. but when i’m driving and my RPM’s go up it charges my batteries really fast never takes more then 3-4 seconds to get back to 14.8 V

[@ceciljones1248]

@@brentsounds Working just fine then you have a lot of power compared to me I only have one bass 8k taramps on two 15 fi hc series?

[@mephInc]

Turn it down at stop lights. Don't be that guy. No one wants to hear your setup.

[@ceciljones1248]

@@mephInc That means everyone with a radio needs to turn it down because I can hear a factory system blasting at a red light and those are the worst ones full tilt nothing but distortion? Every day all day long

[@mephInc]

@@ceciljones1248 Yes. It's called being a decent human being.

[@HooligansMx]

For how much those d4s batteries cost you'd expect more than 3k watts a piece

[@MrJunkman1982]

You can give those subs way more power! You can slap two of those 8ks on there and run em at half ohm bro.

[@brentsounds]

i’ve been wanting to throw some more power thinking about putting a 12k on for a little and see how i like it!!

[@shadwilkins7793]

I’d add another 8k

[@svensplooge9961]

U could put an 8k on each of those subs lol

[@mattkirkland9842]

I have a Taramps bass 8 k on 2 sa 12 V3 dual 4s wired down to 1 ohm it slams 🤣😂

[@lewokejames]

@@brentsounds honestly from the 8K to the 12K it's not going to hit as harder and louder as you would like I guarantee it. Honestly go straight to the 15K or get another 8K it'll be a decision you won't regret

[@HighVybeTribe]

Badass setup, man ! Just slide a 3/4 board along the outer port wall to lower the tuning quick and easy . Or you could do a nice rounded edge peice of wood on the inner port wall 💪😎🙏 Just trying to help out. Totally not complaining- Thats a way bigger sub system than I've ever had 😇👌

[@eddiemaravillas9879]

Sweet set up bro

[@brentsounds]

Thanks man!

[@camilonascimento8259]

muito bom! qual litragem da caixa ? esta sintonizada em quantos hertz ?

[@chamhadcoler5079]

nice setup it all starts under the hood

[@LeonD519]

It really starts at the radio, then go from there. Radio makes a huge difference

[@chamhadcoler5079]

@@LeonD519 I’m talking about voltage wise

[@LeonD519]

@@chamhadcoler5079 I agree with that 100 percent, sorry about that

[@maxhaggard510]

Right on dude!

[@Toddm90]

You just run that lto in-line with the agm? I have one just haven’t installed it yet. With 2 xspower d3400s. Clean setup btw!

[@brentsounds]

Yessir as long as it’s a AGM under hood you can run any lithiums in Parallel with AGM no problem!

[@bailey2517]

How come some videos i see of the x series subs say like "2 X-subs on an 8k" and in the video the subs don't move as much as they do in this video, even though you have 4 of them?? Those seem to be Really moving considering each one is only getting around 2,000 watts. Do you think an 8k would be more than enough for 2 Xv3-18s?

[@onewheelup]

whats up bro,i love the X12's ive got two in a 2005 blazer 2 door in 5 cubes with a 8 inch aero port and its tuned super low,also when i bought the blazer the first day i gutted the inside cleaned it and added way over 100lbs of deadener and foam and wood so its solid,it digs down deep but lifes short and i kinda wanna do a bigger build either get two more x12's and maybe do a bandpass,i want something with some wind,i think,,i just dont want to destroy my ride,like the headliner,i worked way too hard on it,i did a complete LS swap with supercharger all by myself so i kinda dont want to weigh it down but i dont race,i live in texas so i dont get to go to any shows so i dont know what options are out there you know,blazers do get down i know that,any ideas or tips,maybe take the back seats out and build a 6th or something what would you do in this situation.remember i dont want it to get messed up,i see people take expandable foam and put it on theyre head liner on top if the wall and i cringe lol.i could use birch to save weight and some smart bracing so i wont have to triple the box just double it or something idk.thanks dude.

[@eugene9941]

Add 2 d4s super caps. Nice build 👍🏻

[@brentsounds]

I appreciate it man, have some future upgrades. I will be posting updates!

[@ChaosTherapy719]

Sounds good, but it definitely looks like you need to add at least a stripper pole for bracing or out right do Viber flex and/or wood on the roof before it starts to rip and getting rain leaks

[@brentsounds]

100% agreed

[@James.Courtney]

Have you clamped it? Also I have 4 x8s on a JP83 at one ohm. You need another amp

[@masonsandlin146]

This video is amazing.

[@brentsounds]

Thank you mason

[@gregfaulkner2107]

Very clean setup show the flex on the outside

[@brentsounds]

I appreciate it! Will be making a more in depth demo soon.

[@dominicpaul6959]

So I have a 12” sub with a 1800w audiopipe amp and I was thinking about getting a second battery how do I know which one to get ?

[@brentsounds]

I would start if you need one, check to see if voltage is dropping bad and lights are dimming. If they are I would just get one d4s LTO lithium battery if you have a agm battery under your hood. If you have a regular lead acid battery probably would get a agm for your system. Probably a XS Power d3400 they are both good battery’s for holding power but not crazy amounts!

[@mikemorgan4280]

Yo. That set up is sick

[@brentsounds]

Thank you man!

[@adobomix5492]

Do you have a line converter from the stock radio or you just running the high levels at the amp. Because damn, that sounds clean AF. 👌🏻😎

[@mikeymike7986]

Nice to see a system done right! And not a plywood peach crate thrown in back with a rats nest of wires running on stock electrical. Awsome bro👍👍👍

[@brentsounds]

😂😂 I feel ya on that got to do it right the first time

[@archiveseeker]

Awesome! With the factory head unit, I'm guessing you used speaker level inputs on the amp.

[@brentsounds]

Yes, regular remote start and RCA’s then did all the LOC and step downs behind head unit

[@Fackler91]

Clean setup

[@brentsounds]

much appreciated❗️

[@edwinleepowell477]

Phenomenal job bro!

[@brentsounds]

Thanks man!

[@cg28]

Setup is super smart, nice

[@antjuanrivera]

Sounds great all you need to do is get rid of that mechman and get an auto tech engineering alternator and your volts will hold. I have the same amp in my bronco and marvels hold at 14.8 and does not drop. I also have the voltage control that goes all the way up to 15.8 check it out.

[@donjaun540]

Very nice. Great work. I like everything. Maybe not the RF tweeters. Very nice 👍

[@brentsounds]

Yessir thank you! I’m with you on those tweeters they sound okay but they just look off.

[@donjaun540]

@@brentsounds Remember though it's your system and if you it that's all that matters.👍🤛🤛

[@LifewithMario44]

Get some skare super tweeters you will thank me later I'm running them now

[@jahbeats5257]

I have a similar setup but 4 - Xv3s and bass 8k. Same tune 29 HZ and that mid bass is dangerously loud with that song and rebassed Tennessee Whiskey

[@brentsounds]

I love them man that’s a nice setup pretty much the same, and the rebassed tennessee whiskey is in my saved videos your not lying!

[@jahbeats5257]

@@brentsounds it slams but I'm not satisfied honestly. I'm putting U 18's in my other truck for more of a louder build. I also rebass music. My channel is Rebass Junkie.

[@brentsounds]

@@jahbeats5257 i’ll have to check it out!

[@justinshaver1]

Sick build homie

[@brentsounds]

Appreciate it man!

[@Dr_Decaf]

I love your set up bro!

[@brentsounds]

Thank you man!

[@tangomantactical]

Do you like the placement of your Rockford component sets? I have Rockford Punch components. 4-6.5's and 4-1" tweets, that will be run off of a Rockford Fosgate Punch 600 4 channel- birthsheet at 2ohms is 836rms. I have baffles for all mids and will stuff them with poly fill. I have 2-18" Skar EVL's in a 10cuft box run with a JP33. It puts out 4K rms in 1 ohm load. I have 2 batteries, none lithium, big 3 all with 0 gauge ofc. I have 2 runs of 0 gauge from the engine bay to the cargo area in a 08 Yukon Denali. None of this is installed yet. I have another system in my Yuk. I'll need a ALT, some lithium batteries I know. I'm concerned about the component placement. So, you like your placement?

[@brentsounds]

That’s gonna sound good man, I like the components and I like where I have them for now. the tweeters are loud and can hear them on each door as well with mids. My bass outdoes my midrange so I’m gonna go get door pods and go 2 speakers in each door most likely to fix that problem.

[@tangomantactical]

@@brentsounds yea I have 3 sets of speaker pods saved on their sight. I want SQ also. I literally love music. I'm just working with what I have for now. I have no doubt you'll need 4 mids per front door and dual 8" loud speakers for the rear doors. Thats what I've planned for anyways. Thanks for the info. Hopefully I'll have everything installed in a few weeks. My system won't be anything special but, it will be the bigest/loudest I've ever had. I'm also going the extra mile to make it super clean. I'm extremely picky. Thanks for replying. Keep bumping!

[@brentsounds]

@@tangomantactical Awsome i appreciate you commenting! Whenever you get it installed make a video, it’s always worth going the extra mile never will disappoint!

[@tangomantactical]

@@brentsounds it will have a walk around on my channel even though it's a firearm channel. If your into firearms at all drop a sub on my channel!!!

[@terryboyd1837]

Get an after market radio it will be very mind blowing

[@kitanul788]

SPL?

[@michaelrhodes9178]

Pressure 🔥🔥🔥🔥

[@brentsounds]

It’s windy thanks bro!

[@doughboy4681]

Clean setup bro

[@aloyiousbrown3916]

Love yo system bro!!!!! Trying to get mine loud like dat one day 👍👍

[@aloyiousbrown3916]

Look at those woofers dance!!!😮😮

[@lustmatt4]

resilient sounds, small comp shop whose subs are top quality at awesome price points.

[@brentsounds]

Thank you man!

[@brentsounds]

resilent sounds okay very very very good. I’m a big fan of them there not known like sundown or deadbonce yet but they will be!

[@areasonablethought610]

@@brentsounds I been checking them out myself. Next year I'm going to build a crazy system.

[@CharBack]

Looks good man

[@michaelkolosey5756]

Why not make your angle of your port curve with no straight lines?

[@robhumbert6344]

Whats the dimensions of your box and port pls i have the same set up well almost i got 2 aak 6000.1s on mine.i just feel like my box is just alittle two small.just need a reference.thank.

[@brentsounds]

I have my box right at 10.5 - 11 cubic feet after displacement, and tuned too 34-35, definitely would tune lower to like 30 tho. box is about 44 inch wide

[@5dsunny713]

Super clean bro

[@brentsounds]

Appreciate it man!

[@maxbroome8172]

Looks good homie

[@brentsounds]

Thank you bro!

[@Handlebars888]

300th like, 100th sub yw. God bless bro 🔥

[@brentsounds]

Means a lot man I just saw it . God bless❗️

[@Handlebars888]

@@brentsounds ❤

[@0franforn0]

Hello Brent, nice!!! One question, how the 4 soundowns are configured? The only 4 ohm bonina? Or dual coil? How are they connected to each other? Thanks for the information... best

[@brentsounds]

they are dual 2 ohm each wired down to a 1 ohm load!

[@AC-mr7is]

Wire the positive from one voice coil to opposite negative on each one, then all the remaining positives together straight to the positive on amp and all the remaining negatives together to the negative on the amp to get a 1 ohm load from 4 dual 2 ohm subs.

[@justinhupp8969]

Have you thought about doing a 4th order box?

[@brentsounds]

I have, just haven’t decided what i wanna do for next box. I need to hear a powerful one in person!

[@leandrocesarpereira2677]

Great job bro!

[@brentsounds]

Thanks man!

[@dre_day_]

How did you wire your charger to the ltos

[@Stew510]

Clean! Great work

[@brentsounds]

Thank you!

[@Zachecker]

those things can take 10-12k watts those coils are beasts!

[@ChristopherSmith-um9vo]

Bro yo subs slammin 💯💪🔥🔥🔥🔥🔥 damn you have nothing else to do & change yo shih sound good do more vids

[@rustyraids288]

Bro I have the new dual input md8k but mine looks different a lil newer I think mine on just 2 u15s though at half ohm…

[@rustyraids288]

Our voltage drops is about the same and I only have brandx 250a and a super bank 400a I’m surprised you drop down less than 14

[@187hulk]

Hey bro, question! How is that amp holding up? Considering on getting it!

[@brentsounds]

Yessir as of month it’s doing perfect!

[@187hulk]

@@brentsounds Hey brotha, do you got a IG or Facebook? I would like to PM some questions I got on the amp and what ohm I can run it etc

[@elmv6664]

Hey bro. How much do you spend in your car sistem

[@bryanhicks4960]

Nice ass build but bro I’m sure the x 15s might out do those four 12s.. correct box and amp on them 15s are just a different breed at .5ohm. Absolutely slap

[@gonzalezgrant]

Those taramps are good

[@708harveyworld3]

Great set up do u think the amps u are runing are better than the audio pipe brand ?

[@brentsounds]

I do, just because they make way more options, 2 channels, monoblocks, 4 channels. The price for them is really good I will be making a more in detail video on the amps!

[@708harveyworld3]

@@brentsounds kool thanks for the input thanks a lot

[@708harveyworld3]

I’m going to run 2 15inch bdc4 audio pipes on a 3k Smart Bass taramps amp what u think about that ?

[@brentsounds]

@@708harveyworld3 I love audiopipe subs they sound really good when done right. Ive got video im posting tonight on taramps amplifiers!

[@ROBBG88]

Badass system bro wat r u actually clamping I understand that amp does 9200 at 1ohm but the minute u start playing you get impedance rise so I know the subs aren't getting 9200 u should see what you rise too and how much power the subs r seeing love your build tho bro nice n clean

[@brentsounds]

I appreciate it for real man, on my most recent video i made an update clamping around 4k👍

[@jeffersondelira2706]

1 more 8k and you'll be good man

[@brentsounds]

some more power will be seeing the subs eventually!

[@Suth3rnHawaiian]

What's your dimension's on your box? I like the set up!

[@brentsounds]

I’ll get some better measurements, i know it’s 11.5 Cu

[@Suth3rnHawaiian]

@@brentsounds awesome man I appreciate it! I got a 2007 Tahoe gonna and I'm looking to do a similar set up and I've been looking and looking and your box is one that definitely caught my eye! So just let me know when you get a chance homie, much appreciated!! 💪🏼💯👍🏼

[@CapoXNEX]

Amazing bro 🔥

[@sarsavage]

Give me the belt for the alternator belt part number, I have the same amp and yes your system is banging and nicely done I appreciate if you can help with that 🙏

[@tonybrooks8256]

New sub! Very clean build bro. We have similar set ups,I have the lto 6.0 to. If possible explain how how you hard wire to the charger to the batteries I have the same charger too,I'd like to do that too. Thanks bro ,keep up the good work I'll be keeping up with you every notification 💪

[@brentsounds]

I really do appreciate it man, and i will make a more in detail video of how I did it soon, but basically just plugged charger onto the battery brackets (positive, negative) and have the power cord ram under my carpet to my under my rear seat to give them a charge just got to plug it into extension cord whenever. It does help maintain the batteries!

[@southnyourmind]

You're running some high voltage for those LTO's and AGM. It's recommended to be ran at 14.4 for them both, and max for the LTO's at 14.8. I have 4 of the LTO's... and I'm running 14.8. Thinking about swapping them out for a cased LTO that can handle more voltage. Or getting a pcm controller for my alternator. I don't suffer much voltage drop. Have never been below 14.6 and at the amplifier it shows 15. I'm running a deaf bonce aak 6000k to two avatar 12 inch subs. Keep us posted. I wanna know if you run into any problems. Other than that, man. That thing is serious.

[@brentsounds]

So far haven’t had 1 problem. At all. This system has done me perfect and the LTO’s recommend not being charged over 15 Volts so I haven’t ran into a problem

[@kenedie611]

high mids sound aswfull! bass hits hard

[@ssberni3]

Do you have sound deadening ?

[@johnmedrano9782]

nice work

[@brentsounds]

Thank you man!

[@blankabison1331]

all 3 in coils?

[@DARIEN-MG]

hi. can you do a hair trick with those 4?

[@408SPLKINGS]

Thanks for sharing Good video audio commentary demo editing tutorial of system Pretty clean build, system, sound It gets down 🚙🔊🔊💨B💨a💨ss

[@brentsounds]

Thank you!

[@derricklizana4065]

What's it tuned to?

[@Hebrew-3-1-3]

Sweet Jesus

[@lamontbeverly7374]

That shit hitting 🔊

[@1ohmwrecker]

That's beautiful bro! I got the Xv3 12's on a Smart Bass 5k. Gonna upgrade to Korean 8k soon tho.

[@brentsounds]

your not gonna regret it, i love em for real i think i’m gonna eventually run 4k on each, they could defined take it!

[@1ohmwrecker]

@@brentsounds do you use a DSP? It made me get everything out of my amp that I could! I got a PRV one for only $100.

[@brentsounds]

@@1ohmwrecker I do not use a DSP I do plan on running one, does it help the amp much more?

[@1ohmwrecker]

@@brentsounds yeah it helped me get so much more out of it. I've got a few videos. But probably cuz I use a Lc2i and taramps has terrible crossovers. So it gives me all the tuning I need.

[@brentsounds]

@@1ohmwrecker the crossovers aren’t the best ima probably go with that prv i will make a video updating it

[@BuckPease]

How much did all that cost

[@rodolfovargas9852]

Can someone please help me with my battery situation

[@johnathonoppel393]

Nice box

[@cagednstatic]

Change the box go low Like you want. Loud lows shits on high numbers Sounds good tho

[@seanbanks3607]

What is your box size. Cubic ft?

[@brentsounds]

11.5 CU FT