Hey folks. A lot have asked and here it is. 2.5" 410 with 5/8oz of straight TSS. I only patterned one shot at 40yds....but it looks like it will put an end to a turkey for sure. Thanks for watching
Пікірлер: 28
@curtiseggemeyer56815 ай бұрын
I found the load in my Cheddite manual , I can only say I am really impressed. Nice work, great presentation. You , Wade , the Scientists etc and many more give us some wonderful videos , and besides the great information when it is cold outside and we cannot get out I love watching them. That TSS is unbelievable. I started loading in 1981 , ruined a Marlin 120 pump choke by trying daisy bb's for Fox Hunting in Texas LOL
@idahoron5 ай бұрын
I'm super new to the TSS world. So far I haven't loaded any. I'm just learning and getting information. You are by far the most informative reloader for TSS I've seen so far. And since I'm really wanting to reload for my CZ sharptail 410 Your channel is awesome.
@bullet225ho5 ай бұрын
Welcome to the world of reloading. Glad I could help and thanks for watching.
@idahoron5 ай бұрын
@bullet225ho well I've been reloading shotguns, pistols and rifles for about 45 years. This TSS is new to me. Your pattern with your 410 is awesome. Thanks for the help.
@toronadogofast78685 ай бұрын
I would say that I have tried your TSS and lrad loads in 28 gauge. They worked excellent. I would warm people when patterning these TSS loads to not use a steel pattern board. As I was patterning at 40 yards and pellets came back and hit me Just under my right eye and in the chest of a friend standing 10 feet to my left! It also left perfect #9 tss dimples in the 1/4" steel plate. Nobody at the club was appreciating the results but they were impressed!😈
@carlosfalcon75695 ай бұрын
That is an excellent pattern and a .5 OZ would also pattern well and save on that expensive shot.
@bullet225ho5 ай бұрын
.5oz would be a bit cheaper and probably would do the job for sure....but you'd have to incorporate a spacer to fill the shot. There's a lot that goes on in this load by having to trim the wads prior to loading.
@Steelhorse8145 ай бұрын
Creddite hulls makes hulls for alot of other companies. You didn't name the powder you used ! I'm going to your website and buy the data . I've got MP 300, H110, LiL Gun and Alliant 410 powder and 2 1/2 and 3 " new hulls in Creddite & Fiocchi . I worked up a Good Patterning 3" 7/8 oz. Turkey load with TSS 9's . Its rolled crimped . I do have a Mec 410 loader for fold crimping . The table cloth cover works Great for Patterning testing ! Keep the Great Videos Coming ! Stay Safe & Healthy ! God Bless !
@bullet225ho5 ай бұрын
Thanks for watching and thanks for purchasing the data. You'll find another 7/8oz TSS load that maybe can add another data point for you. 300-MP seems to work well with the TSS. I prefer fold as the hulls can be easily reloaded and not have to work them over with a tool for the folded up ends of a roll crimp.
@outdoorswithroostercurrie698428 күн бұрын
That’s NASTY , that would be a Duck / Goose CRUSHER LOAD.
@saltcreekammo5 ай бұрын
That'll do it easy... #10 TSS is good to 50-55 yards from what I've been told. I've had customers shoot 10's at them to 35-45 yards in 2.5" 410 and my load moves slower than yours.
@user-dl7em1ly8v5 ай бұрын
Now we’re talking! Great video! Do you think 2.5” Winchester AA once fired hulls could be used?
@bullet225ho5 ай бұрын
I'm sure it could be used. I didn't work up a load with that hull yet. May be a bit slower....but it could be done for sure.
@kevinfontenot41775 ай бұрын
What’s your website? I couldn’t understand you. I’d like to load and pattern this one. Good luck this Spring! 🦃
@bullet225ho5 ай бұрын
bullet225ho.com
@kevinfontenot41775 ай бұрын
Thanks. Can understand every word that you’ve said in all your videos clearly except the website. Sucks that you have to have a separate site to post data! Just caught the site in the newest 28ga. video you put out. Checking the website and will be leaving you a message there. Appreciate you and the work you’ve put into load development, expenses, and time.
@jeffhartwig13655 ай бұрын
Looks like a nice turkey killer. Which hull do you use for your 28 gauge turkey load?
@bullet225ho5 ай бұрын
Cheddite also for the 28
@krm9445 ай бұрын
Not gonna lie, I didnt think 5/8 ounce was gonna be enough shot. It definitely helps that it’s 10s to get pellet count. I was dead wrong!!! That looked good at 40 yards. I wouldn’t go much more than 40- just my preference for pellet density.
@bullet225ho5 ай бұрын
It surprised me a bit. With a different choke and 9s you could stretch it passed 40. I'm like you though...I'm a 40 and in guy.
@tjsochacki61645 ай бұрын
Do you reload 3 inch 410 and 3 inch 28 gauge?
@bullet225ho4 ай бұрын
Loat them both....yes
@markjaqueway63045 ай бұрын
Where do you get load recipes for tss and what hulls can be used im new to shot shell reloading
@bullet225ho5 ай бұрын
I develop my own recipes for TSS. You can find the data I'm using for these loads at my website bullet225ho.com
@markjaqueway63045 ай бұрын
@@bullet225ho Thank you
@TheTroybmorrison5 ай бұрын
what is your expected velocity?
@bullet225ho5 ай бұрын
Muzzle velocity is 1245.....I stated that in the video somewhere. Thanks for watching.
@TheTroybmorrison5 ай бұрын
Thanks! I have a current load with MP300 and TPS410 in 3" but have to use 1/2" spacers. Your load will save a loading step and allow me to use cut down halls. Will buy the load from your website. Thanks for all your other videos as well.