450VS Digitally Controlled Electric Paper Cutter

Electric paper cutter with digital control panel, automatic clamp and cut, numerically controlled back gauge/push out, optical LED cut line and plastic safety cover

[@erickherrera7543]

Do you happen to know anything about the E--2 error?

[@gospelthatsaves]

HI, I have been using this brand for some years in Austria. Sadly, it does not cut straight. It just cuts bottom papers towards inside about 1mm smaller. I have contacted the company but they suggested to get new or sharpened knife but does not help.

[@RenegadeSith]

If you have trouble with it shutting itself off, I added grease to mine and it seems to have fixed the problem.

[@chabadofsarasota]

Any suggestion on how to change CM into Inches?

[@laloyem2498]

Hola amigos. La máquina es muy precisa en las medidas sin embargo, a mí me ocurre que el corte vertical sale desviado, con un angulo considerable. ¿ Puede ser por algún desajuste ?. Gracias

[@paniclerblx451]

Hey i was wondering where i could get blade replacements for this machine

[@ronaldbrilliant4038]

I purchased a 450VS+ Paper cutter. I just set it up. Plugged it in and it won't turn on. I was wondering if you could help. The power switch is really stiff. I pushed it in and it depressed but did not pop back out. I also have a little tiny chip/computer card. I think this must have something to do with it. The instructions do not say anything about this chip. I looked underneath the unit and do not see anything wrong or a place for the child. I am in the USA and found you online so I hope you know something. I can send photos if it would help. Your photo shows two boards, i only have one. Thanks in advance for you help.

[@briandenney5026]

Let me know what you find out. I can do the same. I bought the power converter that believe to correct, 110v to 220v 5000 watts. It powered up but displays error code and starts to have burning smell in very short time.

[@igir6971]

Error 3, did you know something?

[@calderman4118]

Do you happen to have assembly instructions for how to put the base together?

[@andylee8548]

yes, you can contact me [e-mail]

[@evanbwright]

I have this machine in australia and it won't go forward or back. I have found out that the belt needs replacing. where do I obtain the belt from?

[@jmeredithD2]

how far back does it go? depth wise?

[@danysid24]

This cutter has a problem, does somebody knows how to unlock the blade?, is down and i cannot lift it, regards

[@suryapujakesuma9535]

How do I replace the cutting pads? which is like a long red plastic.

[@TUPSS5034]

we just got one of these but the LCD screen is in metric. how do you switch to Imperial?

[@briandenney5026]

What's the exact power converter you used for successful operation if I may ask?

[@ghulammohammed5440]

IDEAL 5255 made in Germany paper cutting machine ka bilate upar karna hai kaese hoga

[@ryanstewart5109]

What is that paper aligner called? Do you sell them?

[@sherinmelit]

how much price in india

[@nasibsingh7692]

Is this available in India?

[@co-opcopycenter9599]

Is there some kind of safety item that I need to remove before I use the machine. I turned it on and it has a constant beep. the only thing that lights up is the power light. The safety shield will not open and the digital display does not light up.

[@andylee8548]

Hi friend, the safety is platic cover on front side. Before you cut paper, you should close the plastic cover. Otherwise it will not work. If you open the cover when you cutting paper, it will stop it also.

[@danysid24]

Did you fix the problem???

[@techprospcshop]

who can i call to get this serviced or repaired

[@dangibson3825]

I own one of these and I am very happy with it. Let me know if you sell replacement blades.

[@andylee8548]

Yes, we sell it. Unit price is 40/pcs. My email [e-mail]

[@briandenney5026]

What's the exact power converter you used? I got a 110v to 220v 5000 watt max and the machine powered on but has error code E 6. Also starts to have burning smell and shut it down immediately.

[@architsharma6184]

please send prise and sizes available

[@AmmarJdeed]

How much price and how to get such a device and whether it can be sent to an Arab country

[@andylee8548]

unit price $600. we can delivery it in your nearest seaport

[@Jweekley3]

My 450VS cutting blade is in the down position and will not move up. Motor is coming on but no movement. Any suggestions please?

[@kevinscott9745]

Hold reset and let down button same time

[@andylee8548]

First, press "RESET" button to light on, at the same time press "POWER" button, the knife will rise.

[@danysid24]

​@@andylee8548 Hello! why does this happen? we could raise the blade by pressing the reset, power and cut buttons but we don't know why this happens? they already changed a machine because of this problem and now it happens with the new one they gave us

[@danysid24]

@@kevinscott9745 Hello! why does this happen? we could raise the blade by pressing the reset, power and cut buttons but we don't know why this happens? they already changed a machine because of this problem and now it happens with the new one they gave us

[@fabianboxi1]

Hello i just bought a cutter like this, does somebody knows how to unlock the blade?, is down and i cannot lift it, regards

[@andylee8548]

First, press "RESET" button to light on, at the same time press "POWER" button, the knife will rise.

[@Denvermanickum]

hello please assist my machine us set to inches and i would like it in millimetres

[@chicagotollee]

how to open for using, I'm trying a first time

[@andylee8548]

You can read user manual, if you do not know how to assemble, pls contact us. We will show video to you. My email [e-mail]

[@coolmuthu7111]

Price

[@eswaranpalanisamy3217]

MACHINE DIMENTION PLEASE

[@jonathoncarrillo8248]

I am looking for a replacement blade. Do you sell them?

[@andylee8548]

Yes, unit price of blade is $40/pcs

[@designprintandsaveindy]

@@andylee8548 I have been trying to contact you , but I dont know where , can you tell me any mail or phone number , i need replace my blade.

[@johnweihl1001]

Do you know of anyboby that does repair work on this piece of equipment??

[@andylee8548]

Hi John, what's the problems of your 450vs+ paper cutter?

[@gowridigital6852]

good m/C

[@RichardMbokodo]

Hi. How to solve Error 6?

[@briandenney5026]

Any solutions found for error 6?

[@igir6971]

Error 3, did you know something?

[@harsimransethi2437]

SIR HOW TO REMOVE ERROR CODE E-5

[@andylee8548]

There are two reason to lead to E-5. First, the sensor of pressing motor was loose. Second, the motherboard was been broken.

[@RoundOneLine]

how much price

[@kgsmaquinasmaquinas4537]

ola tenho nova na caixa [e-mail]

[@beenishkhan8513]

65000, indian rupees

[@andylee8548]

$600/pcs, my email [e-mail]

[@awsujanhsa4588]

What a Bangladesh office

[@harsimransethi2437]

WAITING FOR YOUR REPLY

[@KhaderBandak]

this cutter is not accurate at all

[@DavidSaquing]

any suggestion where I can get an accurate one? thanks.

[@dtrisker1]

I had no problem with mine - perfect cuts

[@andylee8548]

@@DavidSaquing The precision of 450sv+ is 0.3mm. Did it over this data?

[@noorulislam6358]

how much price in pakistan

[@mdizhar1204]

Kindly send size and price

[@coolmuthu7111]

Price

[@danishshahid7035]

Kindly send size and price

[@SwapanDas-rg5kx]

Price