Nice work doing it without blocking the camera angle, video helped heaps thanks. 👍
@BoredLockpicker3 ай бұрын
Glad it helped!
@Cali4154 жыл бұрын
Mannnn I’m on a job rn, this vid saved my ass lol
@BoredLockpicker4 жыл бұрын
awesome man! glad it helped
@cjisjunk62713 жыл бұрын
Great information. No bullshit. Great combination. Great videos!
@BoredLockpicker3 жыл бұрын
thank you!
@ThePracticalMechanic3 жыл бұрын
Thanks for the demo. I just picked up a lishi starter kit and found chevy super easy, chrysler slightly harder, ford was difficult to feel and easy to overshoot, I was unable to unlock my Toyota highlander before dark so I'll give it another shot tomorrow. I didn't realize each wafer had to picked in both directions when the split wafer is used. I will have to practice on a junk lock when I get to the lexus lock cylinders.
@ThePracticalMechanic3 жыл бұрын
I just saw the split wafer comments below. Love the support of the channel and the viewers!!
@BoredLockpicker3 жыл бұрын
These usually aren’t terribly hard to pick but reading them can be tough. I usually don’t bother trying. I unlock the car with the Lishi then get the code off the lock.
@3351352 жыл бұрын
@@BoredLockpicker if u pick a Toyota lock with the lishi will the decoding from the lishi be the correct cuts or do u need to convert since Toyota is flipped example 4 is 1 cut and 2 is 3 cut only reason I’m asking is I had a 10 sequoia all keys lost and the code wasn’t on the cylinder so I disassembled the cylinder and got the code from the wafers but I didn’t kno the cuts were flipped
@BoredLockpicker2 жыл бұрын
@@335135 with the Lishi it reads it correctly. A 1 is a 1 etc.
@3351352 жыл бұрын
@@BoredLockpicker I was so frustrated because it was an all keys lost and it was the middle of the night and out of all days the code was not on the cylinder 😑 and I used the numbers stamped on the wafers with no luck then the next morning I called lock code and the guy told me they are flipped
@SLJB84 жыл бұрын
This is a great video and you are quick with that Lishi! Not to totally burst your bubble, but just wanted to clarify this is not a split wafer Toyota lock. This lock is from a 10 cut Toyota (HPC Card CF307), which do not have split wafers but they do have "double opposed" wafers meaning 2 opposing wafers in the same chamber. The 8 cut Toyota using HPC card CF208 is for the Split Wafer locks with the splits being in the 2 and 7 positions. They have 2 half wafers in a single chamber, hence "split wafer." Sorry, just spreading correct terminology my friend. Again, fantastic video! :)
@BoredLockpicker4 жыл бұрын
misspoke. someone else corrected me too. thanks for checking out the videos.
@Mr.West6025 ай бұрын
Will this lishi work on a 2019 toyota highlander or do you know which one will. Thanks
@1mikesmiley4 ай бұрын
On the lishi the 1 is a deep cut but on the dolphin 1 is a shallow cut.
@BoredLockpicker4 ай бұрын
I would check the Lishi again….one is the shallowest cut
@ranjitdhillon2752 Жыл бұрын
I love your videos, thanks
@BoredLockpicker Жыл бұрын
You’re welcome
@lmars59334 жыл бұрын
Man really enjoy the great videos. 😎
@BoredLockpicker4 жыл бұрын
more coming lol
@dtc42014 жыл бұрын
Awesome i love these lishi vids im saving up for one but the question is what one to get sch or the kw
@BoredLockpicker4 жыл бұрын
I get the schlage if I was only getting one
@dreamkiss4u2 жыл бұрын
is doing it upside down the right way to use the lishi or it is only just the way you like doing it?
@BoredLockpicker2 жыл бұрын
a lishi is like a key it can be inserted either way. If I'm picking counter clockwise is goes in the way you see. If im picking the other way i put in the other but I'm right handed and that way would block the camera
@ramazinio7718 ай бұрын
wich model lishi is for toyota camry 2015?
@BoredLockpicker8 ай бұрын
What silca key blank does it use?
@dude7etnies3 жыл бұрын
is this best for modern toyota or all toyota? is there a concept behind i noticed, the even then odd numbers?
@BoredLockpicker3 жыл бұрын
I'm not sure I understand what you're asking
@antoniomarcossousa374 Жыл бұрын
Can this lishi do the opening of the Hilux, Sw4 and etios?
@BoredLockpicker Жыл бұрын
What key blank do they use.
@iskooobydoo10 ай бұрын
What’s the difference between a Toy43 ‘AT’ and just a Toy43?
@BoredLockpicker10 ай бұрын
At is 10 cut. The other is 8 cut
@iskooobydoo10 ай бұрын
@@BoredLockpicker do you know what one would use for a 90s era corolla?
@BoredLockpicker10 ай бұрын
If you know the year I can look It up
@iskooobydoo10 ай бұрын
@@BoredLockpicker chassis # AE100
@BoredLockpicker10 ай бұрын
I don’t know what that means. You’ll just have to look up what key silca key blank it uses to see if there is a Lishi for it.
@geecrawdad Жыл бұрын
That Lishi should be good for a 2011 Camry? I haven't had any luck yet.
@BoredLockpicker Жыл бұрын
If it’s keyed ignition then yes this is the Lishi.
@BoredLockpicker Жыл бұрын
Do you know the bitting of the lock?
@geecrawdad Жыл бұрын
@@BoredLockpicker I don't know. It's my first Lishi and I'm practicing on my own car. Plus, I haven't successfully picked any lock yet but I've raked a few! I'm not sure I even qualify as a beginner! One odd thing, I think, I never feel any resistance in position 7.
@BoredLockpicker Жыл бұрын
This isn’t a good one to start with. It’s not one of the easier ones. Decode your key. And if you have and 4 depths make sure to not pick them. Only pick the stiff ones. And spring at all leave it alone
@geecrawdad Жыл бұрын
@@BoredLockpicker Ok, thank you.
@manindersingh38744 жыл бұрын
Hi Mate can do a video on Hu43 lishi plz
@BoredLockpicker4 жыл бұрын
I answered on my other video
@vegitoblue79083 жыл бұрын
Will this work on corolla 2014?
@BoredLockpicker3 жыл бұрын
yes
@casperb55533 жыл бұрын
Corolla 2014 is on a Toyota 2014 Lishi pick but can also be opened with va2 Renault or va6
@vegitoblue79083 жыл бұрын
@@casperb5553 thanks man
@BoredLockpicker3 жыл бұрын
@@vegitoblue7908 prox is toy2trk keyed is this one
@vegitoblue79083 жыл бұрын
@@BoredLockpicker thanks teacher. U the man
@oat260311 ай бұрын
Toy43 ign please
@BoredLockpicker11 ай бұрын
Don’t have an ignition laying around to make a video