# 475 - 💀 Pyramid Resin Tutorial with Skull! Gorgeous Results! ~ Resin Tutorial

[@krishill1272]

another tip when you do any thing in layers don't let it fully cure, wait till its gone tacky then add next layer that should stop the appearance of the lines

[@dmw1306]

For your first try I have to say that is awesome👍 First of all I love skulls. Skull this skull that. You know that ol chest nut. Beautiful work. I look forward to your next video.

[@bernadetteledoux6529]

I like the fog! It makes him look creepy !❤

[@user-lu5it9dy5v]

Very cool! Need glow in the dark eyes ;)

[@candyzapotoski5360]

I think it's adorable

[@yvettek.5650]

I absolutely love it!!! I collect skulls. That is beautiful!!! Great job!!!

[@wilhat]

Art by me I like the bear he’s beautiful he needs lights put in his eyes .

[@ceciliajacobs5346]

Cool Skull

[@joycegossett9981]

That women was me. But it looks pretty cool, with a couple scars. Thanks for helping me. Love you girl.

[@tammyhoffman8762]

That is cool. Did you see the video where the top head part of the skull is like a snow globe. I bet that would look cool in the pyramid.

[@annhunt5515]

Not bad at all for the first one a good job... 🙂

[@shalondapowell7898]

Super cute and cool!

[@lindao7887]

Great start! I would be tempted to leave the top clear also, the entire thing is very dark. The dark, sparkly glitter base is great - but I might leave the tip clear also, that would eliminate a few separate pours lines, yathink?

[@nancybrothers9013]

Great for Halloween!!! Love it💀💀

[@annetteschultz4008]

Looks Cool. Thanks For Sharing!

[@Pashanny824]

It came out great Kanella❤

[@riannonwhitford5883]

Wow that’s amazing 💜💀

[@dleigh4534]

Great detailed tutorial Kanella

[@karen.hendershot8131]

Yes absolutely cool I'm not one for skulls but yeah quite nice love the colors perfect colors blues and purples right up my alley thank you and you have a good night as though it's almost midnight and my neck of the woods well I should say dust bowl because I live in the desert in Washington State

[@mltbkr]

for the first try omg this is super awesome!!!!!

[@appleoneill5135]

That is gorgeous ❤❤❤

[@s.714]

I don't care HOW long your videos are...I enjoy every minute of them. Thank you for the inspiration you give. It turned out awesome tho.

[@joycegossett9981]

Yes I’m so glad I stumbled on this because I just love watching you and now I totally understand the skull and the resin. thank you so much and thanks for writing back to me when I had that boo boo.

[@barbaramchale1306]

WOW, so cool!!!

[@sherrik8493]

That's way cool. My husband would love it. I think u did a very good job. The flaws add character and makes him look spooky and creepy. Lol he's awesome!

[@boxnoob1]

Beautiful I love it

[@karenmclaughlan9128]

I use regular casting resin to fill my skull moulds all the time and I pour in one go never had any issues

[@evonnerubino9684]

You did good! Someday you may even want to try to duplicate the smoky head part!😊

[@sue4940]

The second layer could be the "spooky" look cuz he is , after all, a skull!! Lol I've seen these pyramids with little tiny Christmas trees and such. An entire scene!! Make ya crazy!🤯 putting together. You explained the mold really well. Thank you..👍🏻 I have one, but I've been too chicken to try it. I'm working up to it 😊 I did try smaller one. I put gold glitter (fine) in it first cuz I wanted gold tip. Added black resin. Dried. Added thin layer gold glitter in resin, dried, last layer black resin. BIG mistake was putting glitter in first. I didn't have it mixed with resin. I just shook some in from container. I don't have a gold tip on my pyramid. No resin to hold it in!!! Please let everyone know, not to do that. The dry glitter just fell off when unmolded. Mine was little, only 1.5". So I'm not devastated. But I would be on the big one!! Keep the strength, girl. 👍🏻

[@JERZEE847]

I love the ring holder, the way it "faded" for lack of better word. I love it, even the fog works though!

[@judehegarty1426]

No matter what it's so beautiful I love it! Great first try on doing your skull in a pyramid! 📐 💀 Great job. Even the parts u do not like are still very likable and ik next one will be premo!!! Hope ur having fun in FLA! ☺️

[@dawnpearson4907]

Super Cool!

[@helensonnichsen1173]

Cool, I have had the alcohol do that. I now have alcohol wraps and that dries fast. I love doing resin molds.

[@monicalockart299]

Looks great Kanella. I haven’t done deep casting yet, I’m going to get myself a vacuum chamber for the bubble problem.

[@KanellaCiracoArt]

I wouldn’t bother - but that’s my opinion

[@joycegossett9981]

Wow that is amazing

[@mrsretired]

Super cool.

[@kronicwolf9944]

It still looks so cool c:

[@SuperCoyote7]

Nice job, it looks great for your first time, I had to throw mine out. LoL

[@OAKbyBetina]

Awesome 👌

[@BeeksCreations]

That is cool. It would look neat with some fairy lights in the scull. I've already done that with my skull, but adding it into a pyramid would be very neat.

[@MsMindself666]

I love it! Great job

[@popzart]

Amazing ❤️

[@charleneowens5197]

Maybe you could ask Crystal resin if there’s a way of removing those ridges. I like the skull the way it looks as if it has settled down into a pile of glitter.

[@Jfletcherart3642]

That is so cool 😎

[@Stephanie_Hancock]

Very cool. Your glitter is always going to sink. More will not help. However, I agree that the base looks awesome as is. Can't wait to see you try it again. I really love the way this turned out. Great job, sweetie. xoxoxoox

[@domimassou5457]

So cool ! 👏 👏👏

[@spiritsoulbody352]

This looks cool and yes I have heard as well covering an object first with resin like with wood they put resin on it first or a sealer to prevent bubbles and then add a complete coverage of resin. It looks awesome can’t wait to see your next attempt and what we learn then as well!

[@lorrainecarlson123]

I actually think it looks pretty cool.

[@thepenelopejones]

*It's ALIVE* !! A fresh skull creating spooky bubbles Kanella 😋😁 Honestly this is *awesome* - don't be so hard on yourself hon, anyone would be thrilled to create 1/2 the quality here and/or to have it on their mantle!! Bravo👏👏😎

[@jerrymelton7001]

I love it! That is so cool

[@lzfluidart8315]

Thx for sharing 👍🏻

[@rahulrm87]

Sand down the sides and then buff it for a glossy finish

[@carmendoyle9786]

Thank u for sharing 🙏❤️

[@cnbowles1]

He is Very Cool!!!

[@angelfromhellshawna]

It turned out really cool, Kanella!! I enjoyed watching how you did this!! I LOVE how the glitter turned out...and I of course LOVE the purple!!!!

[@mareemiller6762]

I really like that

[@michellegeist5421]

I think it gives it a spooky underwater look. I love it. Don’t be hard on yourself I could pick flaws in a lot of works but at least you admit to the flaws but I love the skull

[@diedregarrard8013]

in regards to glitter, if you wait about 10-15 minutes and let your resin thicken and then mix in the glitter, they don't sink so much.

[@colorsofjasperbyvilma]

Love the glow of the skull. My fav is the ring holder 😍

[@SkitchBean_aka_Christine_E]

Kanella, I love this. The skull looks like it is sitting on glitter sand. It is so cool looking. 😎 Please do another one and video it. I would like to see how you change it around to be how you want it.

[@Anjalifinearts]

Absolutely stunning and gorgeous sharing! Enjoyed watching it fully

[@susanalbone5101]

Fascinating. What a fabulous idea, so different. Take care, be safe. 💕 Dorset, UK

[@colleenlevy825]

Oh Kanella that turned out great especially for your first try!!! I love seeing your resin projects as much as I love seeing your paintings!! :-)

[@stephaniepotterart]

It turned out great, especially for your first try! Love the colors & that bottom glitter layer really works too! Nicely done!

[@deborahjohnson8287]

Looks good for the first time, add a light base for Halloween.

[@cindyskavland2414]

Way cool!

[@irenerhynes6732]

I love him. He is beautiful.

[@josiecapps2555]

I really like the way the ring holder turned out with the glitter settling..love your trials🥰

[@prplAlliekit]

That is so wickedly beautiful and stunning. I love it. So glad i stumbled upon this video

[@christines2451]

Yes this is cool. I wonder if in the second layer of resin if you place the skull in that layer and tape it the same way if it would just harden with the head of the skull in it. Then in the next layer if you take the resin and cover the skull with resin like you do on your paintings with your hand. Use the torch to pop any bubbles before you fill it up? Just a thought. I really like the glitter base. I love glitter babes

[@melindabrown]

Love it Kanella, really cool. The bubbles actually make it look like it's underwater.

[@Kreative_Rainbow]

That is pretty cool!! 👏👏 Maybe think of it as the skull letting off some steam? I really LOVE my rainbow pyramid!!! 🥰🌈 The regular and sparkly layers alternating is so beautiful!! 🤗😍

[@tuskbear]

I think he is cool very nice

[@jenniferlopez8502]

He is very cool

[@bonniedavis293]

I think it turned out pretty cool and smoking us over his head

[@margaritaphobe]

Hi Kanella, no matter the tiny flaws you see, I think it turned out beautifully. I sincerely appreciate you taking all of us, along with you, on your resin learning journey. If I didn’t live in Australia, I would certainly buy this, and some of your art pieces. However, postage is a killer! So for now, I will dream about owning one of your stunning art pieces . Love and blessings to you and your family ♥️🙏💐💐💐💐

[@roxannemiller1051]

I think he came out cool

[@lisacapers5853]

Nicely done, for your first time.❤❤❤😊

[@sugargmum4517]

Looks great 🤩 The bubbles gives the skull some Character 😍

[@jenanddougdebnar7017]

I use a small amount of UV resin to hold my objects in place.

[@tigerlilly1200]

Very nice !!! Great job 👏 👍 👌

[@antonietta2874]

That is so cool!! Love it!!💀

[@deeannhansen1469]

Love it!! I also love that glitter layer…it adds some dimension!!!

[@marybarngrover1765]

Looks great, try the glitter both on the top section and the bottom section. Nice job!!

[@juanitawalker4836]

I like it a lot. I am just using my skull mold for the first time today... Thanks for the tip on what resin to use for it.

[@LKacrylicartdesigns]

💀That’s cool! Great job Kanella!!!💀

[@raheelazam299]

Beautiful ❤

[@elliev3593]

That looks fantastic. I love it. You did great work on it. I can’t wait to try a project like this.

[@carrieholcomb4015]

That skull 💀 I just Luv the while idea & even like the look w/bubbles it adds an effect like when ya submerged something in water ya get that just more Awesome I think.. 😊 if ur wanting to get ideas on glitter or bubbles ask Erika or Jeff from ATD their always great about questions 👍🏼👍🏼 Can't wait to see more these are all Awesome Kanella thanks for sharing as always!! ✌🏼💖😊

[@markmagbee6892]

How cool is this? Is it possible to make the tip glow in the dark, where it lights up the skull? Or make the skull completely glow in the dark?

[@KanellaCiracoArt]

If you have glow in the dark pigments yes

[@nicholas87541]

Really awesome tutorial!

[@jackiemallon6601]

Yes I had trouble with the glitter sink to the bottom of my bear molds when I used extra glitter resin I can see what you mean about it looking smoky it did turn out nice thought

[@pattimilks461]

Use fine glitter and it will stay .... chunky glitter moves unless you let your resin sit and thicken for a while .... but the piece are still cute just the way they are ... love the skull

[@lizmichalski7672]

Hi Kanella! I don't really like skull-head stuff. But I gotta hand it to you... this is so cool! I Love it 💜 Put a light behind it and see if it glows. Maybe try putting a butterfly 🦋 in it or a rose like the one in Beauty and the Beast.

[@barbarameriton4818]

It’s gorgeous! The little flaws you pointed out weren’t even worth mentioning. All up it is stunning.

[@krishill1272]

if you wait for the resin to cure a bit and it will thicken up then add the glitter ,that stop it sinking good luck .

[@linnykeeble1619]

Love your work, but as you know I hate sculls! The colours beautiful though 😍

[@sue4940]

Hey girl. I'm only 4 minutes in video but I wanted to give you a heads up (if I don't do it now, I'll forget!)🙄🙄 Anyhoo, I just came across a KZbin resin artist " Naptime Creations" . She's amazing..very quiet cuz she's filming while kids are napping!!😂😂🤣 love it! She's making molds that the resin comes out holographic!! But its not an additive!😯 Really cool. You're always adventuring and exploring. You're The most active, organized person I've ever seen. I think you'd love some of her stuff. Check her out. Thanks for this. As always very informative. And entertaining. Keep going lady. You're an inspiration! 💖Sue

[@KanellaCiracoArt]

Yes I know who she is

[@jeannette55100]

Nice

[@Kera.S.]

Would rubbing it with resin with your hands work? It is so Adorbs! Love it 💙

[@KanellaCiracoArt]

Likely