Wonderful video. More parts, springs and plates are packed into the housings than you can imagine. And just when you think Richard has it all apart, he pops another snap ring parts fly.....Keep up the good work. Looking forward to next video!!!!😮🎉😂😮
@ruthlessadam7 ай бұрын
Richard, I appreciate you and your videos. Keep up the good work!
@BourbonBoy7 ай бұрын
Love the vids, glad I found the new channel. Have you ever considered doing a build video. Would love to see all those new shiney parts you always show be installed. Also need to tear down a 6r80. Yes I'm a Ford guy.
@markcollishaw15327 ай бұрын
Happy to find your new channel, missed your vids. New shop aswell.
@frankstavalo57887 ай бұрын
I’m so glad I found a new channel you guys rock keep up the great work learning a lot. I really appreciate it.
@nickheiland33977 ай бұрын
You know sonnax makes that piece that has the governor tubes go thru? It's a really sweet piece. Has more lube jackets n bigger holes already. Nice piece. Check it out
@richardteresacricheducatio35427 ай бұрын
Yes sir we’ll have to check that out
@nickheiland33977 ай бұрын
Knowing you by watching literally every video from this channel and the other I know once you get it once you will never use the stock 1 again. You will say it's a must. Goes in every 1 we do now.
@wilburnmiller18517 ай бұрын
Thanks for your videos, I really enjoy them. Have built Allison transmissions before I retired at the bus company in Saint Louis. Keep up your good work.
@garyclark11357 ай бұрын
I would have had to pressure wash that thing. 😂 always eat bacon, never cereal!
@waterloo1231007 ай бұрын
It’s gonna get cleaned afterwards 😂
@garyclark11357 ай бұрын
@@waterloo123100 Yeah, but still. Richard was chipping dirt off just to get to bolts.
@richardteresacricheducatio35427 ай бұрын
I probably would have pressure wash this unit but it’s 5° outside
@garyclark11357 ай бұрын
@richardteresacricheducatio3542 Well. I didn't consider that. Here in SE Texas, we don't have much of that. In that case, I would have had Teresa pressure wash it! 🤣🤣 Great videos.
@richardteresacricheducatio35427 ай бұрын
lol 😂
@johnfry90107 ай бұрын
I just ordered the set for my 1982 Chevy Truck project .
@hector43307 ай бұрын
Hi Richard, I just found your new channel and subbed. I have been casually watching your videos for a couple of years now after my tranny failed on a cross country trip. Now two years and two salvage trannys later I've decided to rebuild my own transmission and boy oh boy it can be quite overwhelming. Can you make the end all be all step by step video on putting together a daily driver 4L60e, including the Transgo SK4L60E? Most videos out there are either lower quality, drawn out, or don't really encompass the whole enchilada, like why does the 4th accumulator needs to be blocked, what happens when the accumulator springs are broken, do we need to replace the torque converter as a preventative measure while we're there if it's been more than a couple hundred thousand miles, etc. Times are tough and we need a guiding light 🫡 Cheers PS: Please get one of those rode microphones all them content creators use. Your knowledge is worthy of archival and the quality of your content should match it
@n.b.p.davenport70667 ай бұрын
I always have been lost with automatic transmission😢 and never could find a good transmission shop to repair one. Your business is still called Precision Transmission ?
@robertrpenny7 ай бұрын
I've never figured why Richard prefers to work on a trans with mud all over it than p washed. I get the fact that he hates water in them but they go in the wash machine anyway. And it's hard to show wear on parts if they are full of dirt.
@Joe-sn6ir5 ай бұрын
for the pin in the overdrive housing.......you say the diesel is larger and the gas is smaller.....which one does the V10 get? since the V10 was meant to be a gas alternative to the diesel.
@charlesfrancisbancroft6 ай бұрын
I have been watching for a long time, including precise transmission YT. I realized there are TWO voices in the video. I watched the captions, but they did not show who the voice was. I would like for you to add [R] and [T] to show who the voice is in the captions so that I will know who is speaking in the video. WHY? I am Deaf! Smile.
@brucelewis10177 ай бұрын
Hey Richard where are you located at I have a 4l60e transmission I like to get rebuilt
@anthonycook87376 ай бұрын
What is the best place to install a pressure sensor on the 42, 44, 46, 47, 48 series transmissions if you want to put in a pressure gauge? Also... what makes the Sonax pressure regulator valve superior to the Transgo?
@richardteresacricheducatio35426 ай бұрын
I would do the accumulator port on the passenger side of the transmission The port in the middle of the case is the one to put the sensor in
@anthonycook87376 ай бұрын
@@richardteresacricheducatio3542 thanks for the response! What about the Sonnax pressure regulator valve for the dodge transmissions? What makes it better than the Transgo?
@richardteresacricheducatio35426 ай бұрын
I like the lube circuit they added in the valve to me. It maintains better, low line pressure over the Transco, at low idle speeds. When the transmission is severely hot.
@patcoder73087 ай бұрын
Did you ever do a all healed up after the shoulder surgery
@corbanraleigh62227 ай бұрын
I have a 4l60 and it’s starting to slip so my question is how can you tell if a transmission shop is a reliable quality shop what are things to look for
@shaynet23197 ай бұрын
By chance does anybody know how to contact richard to have a transmission rebuilt
@daviddenney1197 ай бұрын
I like the body style
@PaulBisson-hc4pd7 ай бұрын
Did you stop buying Sonnax shafts?
@richardteresacricheducatio35427 ай бұрын
No sir just depending on what’s available right at the moment been using trans specialty for 20 years or longer both companies have quality parts just in different areas
@isralelebron71997 ай бұрын
😊 ❤ 🤙🤙🤙🤙
@markglenn49297 ай бұрын
What year suburban
@methanial737 ай бұрын
Rebuilding a 46re right now.
@robertduffy53027 ай бұрын
HI where is Trent
@n.b.p.davenport70667 ай бұрын
I have no idea where anything is in there
@mikeramsay76827 ай бұрын
👋👋
@mushmouth6 ай бұрын
Get a tripod or a new camera person. Then you can put some back together
@n.b.p.davenport70667 ай бұрын
I don't know why I watched this I'll never ever rebuild an automatic transmission it's very interesting to me every transmission is so different and you know every single part of each one.
@Dustin_the_wind7 ай бұрын
It is always good to have a general understanding of something, even if you don't commit to facilitating the process. It is relevant information.
@dailydriven997 ай бұрын
Richard! Glad to see you again!! I built my th350 for my 4x4 g20 van, off your old videos, now I can say thanks for the help!!
@7700jessie7 ай бұрын
Richard,....... your overall knowledge on any transmission is legendary in my book. I would love to have a unit built by you.
@JamesSpillers-mb9dv7 ай бұрын
Voice to soft Impact to loud Otherwise love Chanel Jas
@TheHonestL1ar7 ай бұрын
Yall ever worked on a 68RFE? Curious to see the insides of one of them.
@bobferranti52227 ай бұрын
Richard, if I'm rebuilding a trans for me or a friend, it always looks like I dumped my tool box around it. You always have just a few tools to work on them, you're awesome!
@vinny6_97 ай бұрын
so awesome to find this channel again! youtube algorithm finally came thru!
@richardteresacricheducatio35427 ай бұрын
We are excited that you found us. Thank you for your support.
@Carcrafter71657 ай бұрын
I’m so glad I found your new KZbin channel looks like a lot has happened over a year ago or so. I’m glad you are still sharing videos. I have a new KZbin account that my name has changed. My old account name was Eddie Patterson so now I go by my birth name which is Horace Patterson from Silverstreet South Carolina.
@richardteresacricheducatio35427 ай бұрын
We are excited that you found us. Thank you for your support.
@patcoder73087 ай бұрын
Did a customer bring that muddy mess in😊
@MrHuntertaylor7 ай бұрын
I really appreciate you going over the assembly tips what a life saver!
@Doc_Fischer7 ай бұрын
Build video! Build video ! Is that th350 center support / low reverse snap ring the choice for this ?
@mikepickett32777 ай бұрын
Thanks, the weekend is complete, very interesting as always!!
@richardteresacricheducatio35427 ай бұрын
Thank you for your support
@jimmungai19387 ай бұрын
What I wish is I could find out where his shop is located? If I recall correctly it’s in Houston Texas I don’t know but I think that’s where he said or somebody said anyway I would love to send a transmission down to him and have him do it because I know he would do a good job Absolutely is a man with good integrity. Thank you sir. Oh by the way for your wife for holding the camera. OK you folks have a good day. This is six in a row.Jim from Kennerdell pa.
@ChuckGambler7 ай бұрын
You must be a genius all them pieces and it's gone to work when your done
@n.b.p.davenport70667 ай бұрын
I agree 100%, I'm no dummy but I could never ever do that.
@butchromig8247 ай бұрын
my buddy has a 07 3500 cummins 4x4 with a 48re trans,it has a problem staying in 3rd gear at around 33mph,his rebuilder said it needs a spacer,or washer/shim somewhere in the valve body to fix it?,have you heard of this?, also i have a tool that reams out the governor housing on a 350 and 400 trans so you can install a bushing to save a bad case,would it be of any use to you?
@shelvins18417 ай бұрын
Hi Richard, glad you finally did a video on a 47re. I believe you had one on your old channel but i couldnt find it. I have a 2000 ram 2500 diesel and i was thinking about rebuilding it myself (rethinking now that ive seen this video lol) and have a solid answer on the gas vs diesel thing. Now that i know they have different parts, can a gasser be rebuilt for a diesel? I ask because its much easier to find a gasser than a diesel 47 and it would be much more convenient to rebuild one on the side then swap it in. Thank you
@reinovator7 ай бұрын
can I send a tranz Th400 to you or should I send the whole truck? 1977 GMC C15 panel truck.
@marksd56507 ай бұрын
I can’t freakin believe I finally found you. I’ve been rewatching the old videos. But here we are again. Best regards
@Garth20117 ай бұрын
"Neoprene"...It might help some of us viewers to know a little more about the trans shift kits. I have heard TransGo is the likely choice but then over the years they have a Jr. kit, reprograming kit etc. with some transmissions having a choice from three different kits. As in this 47RE review, just how many upgrades come with a Jr. kit and is it worth purchasing the larger kit vs. the Jr. kit? I know that would depend on the intended uses of the transmission so lets keep the subject on a reliable, firm shifting vehicle that will tow maybe 1/3 rd of the time. Also, on the trans kits from TransStar, do they include the "Selective shims, washers, etc." or do you have to have those on hand?
@ryanpanik89897 ай бұрын
Make a hoody with writing on the back that says PRETTY SIMPLE
@yeagabomb097 ай бұрын
Awesome to hear your voice again Richard! Was so sad trying to find out what happened to the other channel. So so so happy to get my transmission fix through your knowledge again. Hope you are well!!
@fredpo6207 ай бұрын
Damn was wondering what happenned with y'all! Seems like others the youtube algorithm made me find you again susbscribed again! Hi from Quebec, Canada
@crossman5757 ай бұрын
Do you ever get any other units besides GM and Dodge/Ram? Ford, Toyota etc.
@thomaspeterson89697 ай бұрын
I should be rebuilding these American gearboxs so much more fun and easier than all the European gearbox I do.
@ovalsx7 ай бұрын
Richard do you build trans and ship em???
@richardteresacricheducatio35427 ай бұрын
Unfortunately, no, sir we do not. We only install all of our units.
@BreckHoggatt-td4lq7 ай бұрын
Richard glad to see the new channel, my 56 chevy muncie is having problems how do we get in touch with you. In pampa tx
@AlonzoTG7 ай бұрын
cool, looks like the other guy did a pretty decent job and the transmission essentially outlived the vehicle, even if there were a few things that could have been improved further.
@woodlandwrench7 ай бұрын
"Input Title" is a very good director I must say. Love these videos :D
@n.b.p.davenport70667 ай бұрын
Great video but for me I didn't learn anything cuz I wouldn't remember all a little tips and tricks. 👍👍
@n.b.p.davenport70667 ай бұрын
There's instructions ? I'll be doing an awful lot of reading
@mushmouth6 ай бұрын
You should try putting one back together
@maxyanez9447 ай бұрын
watch that bacon, it’ll clog your valve body real bad
@UcantBeSerious037 ай бұрын
I'm glad to have found your new channel!
@mcgregor7117 ай бұрын
You need to do a couple of 4t65e transmissions. I love the way you explain everything.
@richardteresacricheducatio35427 ай бұрын
I like that tranny a lot too. I have a lot of experience in that unit
@n.b.p.davenport70667 ай бұрын
You have to be using 100% of your brain capacity
@BaltimoreActual7 ай бұрын
Hope ya'll have a great weekend! Thanks for the video!
@floodway29557 ай бұрын
Hope your car show with the Dirty Bird went well. Nice
@garyharrington53007 ай бұрын
Thanks for the vidio you 3❤
@n.b.p.davenport70667 ай бұрын
I worked for GM dealership before rebuilt engines and standard Transmissions but never an automatic, your knowledge just blows my mind😮
@Garth20117 ай бұрын
That's the difference between a mechanic who keeps himself current with training classes and so forth vs. the one who just keeps limited knowledge and believing he knows a lot.