487 RSW Sam Bush Mandolin That 3 Shops Couldnt Fix

[@nacekozo]

These videos are like a movie version of Zen and the Art of Motorcycle Maintenance

[@lerkzor]

Jerry, thank you for demonstrating once again the difference between a luthier and a master luthier. Also, all of my thanks for taking the time to share your craft with us. I am looking forward to see how you finish the redesign and reconstruction.

[@mr5oa1]

A man that knows the sound of a file sandpaper or scarper is only music to the operator of said tools, Thank you for saving us with the sound editing on this!

[@johnthomas2255]

Jerry no matter what problems you run in to , you have them solved immediately, love your videos.

[@joebikeguy6669]

Having watched all of your repair videos, it looks to me that this repair had the most potential for catastrophe of any repair I have ever seen you do. Your slow approach and patience really paid off. Looking forward to the completed project.

[@handiman5]

'You don't go Hercules on that'...love the phrase! What's amazing is that you tell us what you see, and what you're thinking on a problem to correct. Thanks my friend.

[@paulkleinkramer5065]

I can see the twist very clearly. Thank you! Nobody else takes the time and effort to show these things.

[@pmccartn7777]

Many many thanks to whoever put this video together without music. These videos are so much more enjoyable this way!

[@RosaStringWorks]

Sorry you don't like my music but most folks seemed to especially the fact that I sell lots of it on my website. In fact you may have to go somewhere else if you don't like it because this was just such a large video I didn't have Room for it itll probably back in episode number 2

[@pmccartn7777]

@@RosaStringWorks I like your music. It's just that I have watched pretty much every one of your videos (some of them multiple times) and I've heard all your songs again and again. No offense intended.

[@harrisonandrew]

Now THAT was my kind of episode. A good chunky one showing how Jerry solves problems. I didn’t want it to end. Fabulous. I can’t wait for part 2. Nice job.

[@tommckeown6970]

WOW! great work Jerry. I'm always amazed at how fearless you are in jumping into the deep end on these repairs. This was a great video.

[@itdock]

Thanks for the great video! I love watching you solve problems. Seeing how each challenge is overcome is interesting to me, most people would have just given up!

[@eddiegalyean]

I liked the excitement in your voice when that baby started to come out. “Oh, yeah! Oh! Yeah!” Awesome. Don’t make us wait too long for the next episode. HaHa

[@briscard88lolo65]

you finally found the right (but unusual ) way to pull off the rod ,Genius Jerry ,congratulation

[@leonstancliff7218]

I have to hand it to you on this one Jerry, it was a difficult repair, yes, but your presentation on this one was excellent. Every time I started thinking "why on earth is he doing it that way?" you gave us the answer.

[@fongy200]

In all the years of being a subscriber to your channel, never have i heard such uncertainty in your voice about a project.But when i have heard trepadation in your tone i always know you'll get the job done. I have learnt lots of techniques from you Jerry determination and passion are qualities you exude in buckets. An instrument which has had treatment at the RSW is a very lucky instrument indeed and without watching through to the videos conclusion i have every confidence you'll fix it. You always do.You fixed more Gibsons than soft Mick they aught to be ashamed of themselves lol. Thanks Jerry. DLTBGYD.

[@alansturgess1324]

Two of the most wonderful uploaders begin their videos in much the same way . . . "Hello my good and faithful friends" and "Hi there, gang". That says all we need to know about them as people. (Just hope Jerry doesn't start throwing dogs around, though!)

[@troyclayton]

I love watching the problem solving. This is good stuff for us amateur luthiers. Thanks!

[@johnclayton1026]

amen

[@joesharp5602]

There is no substitute for experience, and it shows in your work. What a great environment for Kaleb to learn in and be associated with. Never a dull moment at Rosa String Works. Keep the great content coming, and my best to Kaleb as well.... Joe

[@Sammywhat]

You sir, have more patients and guts - very brave indeed!!! Great job!!!

[@flyifri]

I can see that bow all the way from Niagara Falls. Thank you for sharing.!

[@nellayema2455]

You're on the right track for sure. I was amazed that the truss rod was upside down! What you're doing looks pretty destructive, but as you know, you can repair any damage caused by pulling the rod. The "damage" is in an area that will never be seen. Good work. Looking forward to part 2.

[@joetaverna5264]

Good evening Jerry you no I've been watching you for a long time and this was by far one of your best God bless you and your family and Caleb

[@marmerg]

Id bet Forthwith Tx is right that one shop or another (or the owner) torqued the nut so hard that the truss rod not only pulled through the neck material ,but also spun the rod over, and since the anchor was round , it just spun the whole assembly (once the anchor ran out of threads) just happening to end up at about 180 degrees backward. The anchor had a round collar because it was inserted through a drilled hole from the neck block or neck joint. Then , of course, they had to cut off the extra truss rod exposed at the headstock. Then they took the $$$ and ran away. The original design was faulty, and someone else made things worse. Your patience and intuitive analysis is saving the day. you have mentioned before that one job or another was the weirdest ,or your best, but this one is my favorite and I take my hat off to you...I hope the customer appreciates you talent , skill , and determination as much as I do. Thanks

[@JimChamp]

The 180 rotation is kinda hard to believe, because the neck would have bent sideways horribly as that curved rod went through 90 degrees with the amount of curve on it. It would be interesting to see if there's any sign of the slot being chewed up in the middle. The bend on the rod would tend to make it stop at 180 or 0. But whatever happened a truly horrendous amount of force must have been put on the truss rod. I think I tend to favour some kind of major brain fade at the factory and the rod being upside down from new. Reason is that we know that a completely unreasonable amount of force was used on the rod, and the rod being upside down and completely non functional is a reason why someone might have put stupid amounts of force on it.

[@Guitarinthewoods]

This one more compelling than anything TV tonight ! Impressive work.

[@tiger12506]

As a beginner guitar player, knowing how flat a fingerboard should be is extremely helpful. Thanks. Usually I find that if a guitar is

[@mitchmatthews6713]

"You could throw a dog under those strings!" That was hilarious, Jerry!

[@nancymilawski1048]

My best friend has yorkies. 😂😂😂😂😂😂😂😂

[@zapa1pnt]

@@nancymilawski1048 This was room enough for a Great Dane.

[@f5mando]

@@zapa1pnt Or a Dawg...

[@BobPegram]

I got you all beat. I could throw my parrot under those strings and he'd fly through, flapping wings and all!

[@lazecowboy]

How to make a Saturday night a Great one: Playing music at the Square in Mt View Ar. then coming home to see my favorite channel has a new Post! - thanks Jerry!

[@mitzioden4926]

You sure used ingenuity to remove that truss rod Jerry! Good work!

[@RandySchartiger]

I'm just glad this mandolin came to your shop instead of mine lol had it came here = BIG money! strange they put the truss exactly backwards from how it should have been. great work here as always my friend! good luck with this one!

[@AmosBHaven]

Judging by how MUCH "bend" that was in that truss rod? It COULDN'T have been installed correctly at the factory.

[@jeffscarff1655]

@@AmosBHaven I have to agree. With as much bend as is in that rod, to twist it 90 degrees would have blown out the side, much less get it all the way to 180.

[@wjb2]

sitting here with my coffee on a miserable Sunday morning in the UK. Thinking to myself you’ve got a humdinger there sir.

[@paulkleinkramer5065]

Very interesting neck truss rod situation! About 20 years ago a came across a Gibson Mastertone plectrum banjo with just the same troubles. I wish I'd had the skills to repair it even half as well as you have this mandolin.

[@cdarius52]

Jerry you are not alone with the taste and smells. I have the same problem.

[@JohnKneece]

Watched the entire vid..you had so many issues with this one! Love your mindset and your spirit. I know it is none of my business but knowing what you did on and off camera I would love to see the bill $$$ Throw dog under the strings...love it

[@OleNavy]

I can't imagine anyone with a nut-driver, able to cause the end of that truss rod to move that much through solid wood unless they used a torque wrench driver to do it. I mean that is unreal and it took far more strength than I could impart to it. The truss rod being upside down is another mystery as well. I just don't think it was anybody with any experience in such things could make such a mistake. The CA glue may have been an effort to anchor the end of the truss rod in place. I remember you showing the truss rod during a shop talk but it just didn't register, how serious a problem it had been. Great video, Jerry. Thanks alot!!!

[@andrew719]

Bravo Jerry!!! I just watched the part where you pulled that truss rod out 1 hour into the video! I enjoyed watching you figure this out and especially the bent screwdriver to pry it out. I was shaking my head all along wondering what you'd do.

[@TheGuitologist]

I have done a few old mandolins that didn't have truss rods and had to remove the fretboard and level the neck itself with a leveling beam. Mandolins, because of the double course strings, have SOOO much string tension, the necks take punishment. The fretboards need a bit of sanding to blend them back to the new neck shape, but it makes the instrument playable again, which is the important thing. Love your videos, Jerry. Great work.

[@DTGuitarTech]

Absolutely love this video. You, sir, are a skilled man of heroic proportions

[@stevedimebag]

Can’t wait for episode 2!! That thing was a MESS

[@MartinSBrown-tp9ji]

I was hoping at the beginning of the video that you would come to replacing the rod in the neck.Great job. can't wait to see the next video.

[@ranjrog]

Well, I’m hooked for sure on this repair! Can’t wait to see the next installment!!

[@LeoWal01]

Sure liked this one, especially you commenting/criticizing your choices and work (and others 'work'). Nice job, can't wait to see the next vid on this. Thank you ever so much for the joy your videos give me!

[@fixitmakeit]

these are the type of jobs that give the greatest job satisfaction , not usually the best paying but so good when the end result is the correct fix. great work Jerry

[@davidmiller9485]

It was my nose that allowed me to be the chef that i was. I can taste each seasoning that is added to a dish. My nose is good enough that i can tell when pasta is done by smell alone. My wife thinks i'm a mutant of some kind because of it. So i understand completely about having a good nose and sense of taste.

[@dougmckenzie8074]

Youare absolutly mazing thankyou Thanks!

[@CALVINLNIKONT]

Very nice job!!! I'm glad you went as far as you did!

[@mikaso]

Thank you so much for making this documentary. I am enjoying it very much!

[@hijmestoffels5171]

I wish I could press the like button many more times to express how much I like this video! Of course I can do that, but the thumbs up goes only on and off. This repair job may be a pain in the *** for you, but it does make a very entertaining video. Can’t wait for the next part.

[@jamesdean780]

Love watching an artisan at work. This is great stuff.

[@jeffgrier8488]

Wow Jerry, you certainly get all the challenging ones! I'm looking forward to seeing how this turns out.

[@alonsoquesada1136]

Jerry your problem solving skills are on point

[@bruceducker2029]

Good video Jerry. Having watched the truss rod shop talk, and you showing that particular truss road, really highlighted the issues surrounding the rods. I would imagine it would have taken a lot of force to pull the rod the 1/4" or so thru the wood (Maple at that), despite the fact that it was installed (presumed) incorrectly. It definitely looked like Ker Ap. :-). Will wait patiently for the fix. Thanks for the content.

[@CapnBubbaa]

The sign of an Master Craftsman, was just exhibited again... Jerry your the Man!!.. knowing how to get out of crack, before you got into it... a true sign of a Master Craftsman

[@paulakers8801]

One of your best videos in my opinion.

[@kirkboswell2575]

The twist is visible. I actually thought I saw it when you were showing the underbow, and I wondered what was wrong with me when you were talking underbow, and I was seeing a twist! 😊 Actually, you're not alone with your reaction to CA glue. Quite a few people (number wise - percentage is pretty low) have the same issue. Your heightened senses could mean your reaction is more than others with the same issue. Have you ever thought about being a professional wine taster? Sharp sticks notwithstanding, remind yourself that it takes a special person to handle a "problem child" 😊

[@kevincozens6837]

It is no wonder three other shops couldn't fix this mandolin with that truss rod in upside down. Trust Jerry to Work through all the problems and find the underlying cause.

[@waynedavies3185]

Nice work Jerry... You were right...

[@malgibbs5168]

total entertainment, absolutely brilliant one of your best so far

[@zapa1pnt]

This is more than entertainment. This is education/instruction.

[@peteleoni9665]

Neck relief. You covered that in first few seconds. Moving along......

[@BillyBob-tt7hy]

What a job, you are right on track!

[@MrDparker69]

and That Folks is why you send your instruments to Mr Rosa. Another great video, roll on episode 2. Miss your music though. If I could have my way I would have a Best of Jerry playing and singing video and a Metal detector Video ( Jerry touched on his love for metal detecting a while back) Thanks as always . Danny

[@TheTrainStationOG]

This is the first video I’ve saw on your channel. I hope to build my first electric guitar and many guitars afterwards very soon. Thank you for making these videos.

[@davidsims1329]

I just love your work, you are a master crafter luthier, I learn so I hope from you friend.

[@richardthacker]

Love the way my friends cross the pond in the USA say Yorkshire. Back in England we would say it more like Yorksheer.

[@zapa1pnt]

Yep, I've seen news correspondents, interviewing folks in England, who will say "sheer" several times, during the interview, then turn to the camera and say "shire". Oi vey! They, also, do the same kind of thing in every other country, as well. Back here, in the US, in Missouri, the residents pronounce it as "Mizzoura". Makes me want to puke.

[@bkreed27]

I love how Brits still think they have to clarify they mean "soccer" when they say "football" to an American. Message to all Brits: WE KNOW. And YOU invented the term "soccer" to begin with. It was a slang term based off "Association Football". So ends my rant.

[@richardthacker]

@@bkreed27 Hi. I was being absolutely genuine when I said “I love the way …”. My uncle was born in Ireland in the 20s and came to England during the war, where he joined the Air Force. After the war he set off to the USA to make his fortune. Over the years his accent changed from Dublin to New Jersey. So when he visited here in the U.K. he would try to use the ‘English’ versions of words - which sounded really odd! But I love the variety of accents all across this planet and I hope they never get lost.

[@bkreed27]

@@richardthacker well then you have exposed me being a cranky, old fart 🙂 very kind of you to nudge me in a better direction Richard. My hat's off to you. BKR (from New Jersey)

[@richardthacker]

@@bkreed27 no worries, my friend, I’m pretty cranky myself before my second coffee! 😂

[@jthonn]

Nice work, will be interesting to see how you straighten the headstock.

[@richardpaulhall]

Growing that second set of hands looks really useful.

[@tryintobesoquiet]

Enjoyed this video. Look forward to part 2. Thanks Jerry.

[@miltonpomales5405]

Trying to understand the physics of the rod and how it does affects the fret board, very good explanation!!!

[@motorcop505]

This mandolin finally met the master.

[@Wildman9]

I saw the twist when you first showed us , but thought maybe it was the camera . Boy was I surprised that you saw it too. That baby looks like a banana neck mando.Hahaha .Keep at it,it will be fine . You always make fine videos on your craft . Thanks🎸

[@Ron-vq3zl]

Bob, I saw the twist also, & thought maybe it was just the way that Jerry was holding the Mandolin, since he didn't mention it, at that point. Yeah, that neck DEFINITELY has several issues!! 🙂

[@euhdink4501]

Saw it too and I thought: well, my carpenter's eye is getting better and better!

[@invay69]

I would pay that eyes closed and hands down man... you know what you're doing!

[@philnotley5138]

I’m not suprised that shops couldn’t fix it it needed real skill knowledge and attention

[@johnmanser2331]

Absolutely fascinating video. Thanks for sharing it with us all.

[@TheArtistFormerlyKnownAsKnut]

Look forward to part 2, and also the next episode of the 12 string

[@RickRomanelli]

It was worth it, Jerry. This was a very enjoyable video.

[@mrkkitson]

Simply love the way you work.

[@chriskowalski7038]

Cant wait for the next vid on this fix...really got into this one..

[@petermcconaghie7745]

Crikey - that is some sort of twist! Love your straightedge by the way.

[@johntait491]

10 out of 10 for perseverence..!! Well done..!! 👍

[@alanoffer]

Anyone with a Yorkshire terrier within a mile of the Rosa string works ,had better keep walking ,,fast

[@johnsee7269]

When I walked mine... I carried a S&W, M&P, .40. No one ever touched my dag that was unapproved... They'd a paid a heavy price for whatever they got from even touching my dog! 🤓

[@fredberthiaume6883]

Now that was a lot of work. Great job!!!

[@bobl2995]

Brilliant video Jerry Thanks for making it 🇬🇧

[@daryllossing1340]

This must have been installed on a late friday afternoon.........upside down. can't wait for the next episode jerry! a cliffhanger

[@csnelling4]

That was a tester Jerry, well done👏👏👏👏👍🇬🇧😊

[@audioruss]

I can’t wait to see the next installment!!

[@zapa1pnt]

With all the "things" we've seen, from Gibson, over the years, I have little doubt, this was done at the factory.

[@robertfeindel1145]

I searched the patent, here’s what I found. patentimages.storage.googleapis.com/4d/57/18/4cc57793b2f981/US1446758.pdf P.S. FYI: For an invention to be patentable, it does not need to be the most efficient, effective, or perfected form of a particular use (whether it is a medication, a piece of software code, or a machine). It merely needs to work as described.

[@jmtab]

It had to done incorrectly at Gibson. Someone was hungover and put in the truss rod upside down. Jerry is too much of a gentlemen to say it.

[@mysteritmodk9572]

Fantastic video! Your problem solving is just amazing to watch! Brilliant!!! :-)

[@rdooba]

Great job Jerry! Tough job

[@adamstewart247]

"You could probably throw a dog under it" = favorite new expression from Jerry lol so funny

[@rolftolksdorf6822]

Hey Jerry,hey Caleb,Sam,bush mandolin,wow,soul eating my nerves.But great job,very interesting.Greatings from Rolf,southgermany,town Heilbronn

[@kevinauld4367]

I have to admit I new a little about string instruments and more about woods ! I first stumbled across your video's a couple of days ago then I noticed that you had perches a billet of what you called quilted maple at that point I began a marathon of you're video's and I have learned more . I am considering a combination of woods from the north west that both are not easy to find but if I get the woods to gether I will make a insterment and send it to you so you can tell me what you think of the sound . I think you will like it even if you never whont to make one for your self .

[@jomama55ful]

huge twist. easily seen with the naked eye... wow...

[@Bluuplanet]

I think you're right about that truss rod bend. Pulling on the ends of a bent rod would tend to straighten it, which is the wrong direction for countering the pull of the strings. I'm also thinking that rod is probably the same round stock that's used in guitar necks and its too thick, or at least not optimal, for a mandolin.

[@robertfeindel1145]

I searched the patent, here’s what I found. patentimages.storage.googleapis.com/4d/57/18/4cc57793b2f981/US1446758.pdf P.S. FYI: For an invention to be patentable, it does not need to be the most efficient, effective, or perfected form of a particular use (whether it is a medication, a piece of software code, or a machine). It merely needs to work as described.

[@jimbertrand2499]

Great work Gerry!

[@richardthacker]

Wondering if the truss rod could have been the right way up once - but the excessive torque applied later on rotated it at some time? Great video.

[@zapa1pnt]

With the bend in it, that is most unlikely.

[@kaylybbert2120]

Fasenating video - enjoying it so much!

[@artbylarry]

fascinating stuff Jerry thanks for sharing

[@blackbirdpie217]

I've untwisted necks on banjos that I can take the neck off. WIth a mandolin taking the neck off is not so easy. It also puts the finish at risk because it's a high temperature operation but if you keep the oven below 250 degrees it is usually safe.

[@INDYOSKARS]

Jerry, the man who succeeds because he doesn´t know how to quit !

[@CarolDailey]

Can’t wait for Part II!

[@jeffhildreth9244]

Experience meets tenacity. !!