4s Powered Arrma Typhon 3s

#Jayteerc #arrmarc #horizonhobby
4s lipo run of the Arrma Typhon 4x4 BLX. I don't really recommend running your vehicle like this but if you do just make sure you check your temperatures. That's far mine has been okay but like I said I don't recommend running your vehicle with this 4S lipo and also higher amp speed controller with the stock motor.
link to 4s esc used
www.horizonhobby.com/product/...
Donate to JayTee RC KZbin Channel
www.paypal.me/littlekingdombu...
👕 link to buy t-shirts
teespring.com/stores/jayteesh... Traxxas Hoss.

[@suchislife82]

Nice job ! Typhon 3s is the only thing I have, an it's awesome to me with a 26t pinion . Great rc

[@gowerski]

that thing sure boogies

[@situationunchanged9733]

This is perfect 👌 I've got 4s bat's waiting to go, I've been using max 10sct for a while, all I need is 5 minutes from work so I can run it. I've also got a 2850kv surpass and 20t pinion I wanna try too but that'll be too fast to bash I think 🤔

[@Joercgarage]

Wow that thing stayed cool as a pillow I’m impressed was just running my mega brushless infraction and was hitting temps around 170 so heat sink and fan Incoming and you and me have the same old school temp gun it was a hand me down but it works good lol😂

[@travallen5481]

I run mines 4S, on stock motor. I will eventually put a 2650 Surpass/Rocket motor in it and gear up.And maybe a Vendetta Spur gear.

[@captaincouldverc]

Dude, I'm impressed you can hit that ramp at speed.

[@bradleyfletcher5562]

i put the electronics from axial ryft into my typhon 3s so it is now a 2200 kv 4s with 27t pinion

[@randallcrippenjr4182]

I have the Mega version, it's beefed up to run 6s. Hot racing metal diffs, metal 3s slipper clutch assembly, metal drive shafts, metal center drive shaft, metal steering assembly, skid plate, big bore shocks. Powered by max8 paired with 2200kv off brand motor. It's a f**kin rocket on 4-6s. Honestly I could've just bought the 6s like the guy at the shop told me to 😄🤦🏾‍♂️and I probably would've had better performance but the journey was fun🤥🥴

[@RCRoads]

Nice driving Jay Tee. The Typhon on 4s is awesome. Same for the Granite. I enjoyed watching both of them in action. Even if something isn't recommended, if it works, why not. I have seen other videos of ESC upgrades without replacing the motor and they seem to be just fine. Low motor temp readings. I have limited knowledge about motor ratings but honestly if the temp is good and the bearings hold up what could be the harm? Thanks for sharing your findings.

[@georgeblack7403]

Niice

[@chadbiermann3380]

I've never put a GPS in my typhon or my big Rock, but when I drive them I feel like my typhon has more Speed because it's way more planted and controllable at high speeds. My big Rock when it was stock was really squirrelly at high speeds. Now I run Mohave tires on it on 4s and it's way more controllable at high speeds.

[@philthyco1]

Dope!!!..Mines is still new in the box lol..I might raffle it off or something after a few runs lol

[@Stepside906]

Why did arrma stop making the 4s lineup?

[@vapeapetn]

I have finally oreder the $700 of parts to take my Typhon 3S to another level. New Savox Servo, castle Mamba X EsC and motor combo 6S, RPM suspension arms, DX3 Reciever / transmitter, badlands wheels & tires, steel Spur gear, steel differentials, steel input gears, and hot Racing aluminum center drive shaft. Will run this rig at 4S full potential for Track. All in all when all parts installed this car has cost me a little over $1700 including charger + 4 batteries...OUCH

[@GrandPitoVic]

Loose is fast and on the edge of out of control. The better handling, usually the slower.

[@ljsmixbox44]

Jay-Tee RC,

[@hazedollors]

I could have swore the vendetta is the fastest of the 3s line 🤔

[@mike-yc8bi]

I run all my 3s arrma with a 4s esc havent had many issues with that motor

[@rcmiamimozzy1210]

Arrma has a new Senton? 3s or 6s?

[@TheChad435]

Nice JT! What app did you use for the speed run?