4ws Ryft with Vitavon Portals!!

[@scottdaubenspeck2291]

Awesome video Joe. Would love to see the full build on the 1 that needs repaired. I know everyone don't like the build videos but I enjoy watching them.

[@stwright318ify]

Would love to see you do a side-by-side comparison of the stock Ryft and the modded Rfyt! Love the channel always have awesome content with all the RCs we want to see!🙏✌😎🇺🇸

[@gisall8205]

Extremely Addicting.

[@darthbaker820]

I have 4ws on my GOM and use a Spektrum DX5C and it works great for steering control.

[@The_Privateer]

I would definitely like to see this portal setup with the old AXE 3300 system in it and NO swaybar (to maximize articulation) to see how it **really** crawls. These are on the list for my ryft which I am building out as a crawler - mostly because everyone says "it won't work well for that" - I like proving people wrong :-)

[@RuisRcAdventures]

Wowzers Joe, i amazed at the difference those portals have made to the Ryft but also the fact you can still have a bash with some jumps thrown in its awesome! 👌

[@Miguel.herrera.71]

Maybe not the most capable yet… but definitely the most expensive crawler! What a beautiful vehicle 🤩 all eyes on you brother 💯

[@urdonercjeremyburris7541]

Wasn't designed to crawl. It's a rock bouncer. It will never crawl

[@Miguel.herrera.71]

@King420man King420man 💯

[@ervinmedina9014]

@King420man King420man You are definitely taking it out of it's element trying to just make it crawl. With all that Vitavon and cutting the speed in half it's doable. Like you said, worth it?? Nope. But it's the the person's $$$ and what they want. I think the Ryft is better at full speed bouncing with just the Vitavon axle upgrade!!! It's still a cool rig!!!

[@willanderson5088]

I want a set of those to make a crawler with. Those are amazing looking.

[@Wreckedekcoupe]

Looks like the 4ws works better with the portals adding some width. Dammn that thing turns on a dime. Game changer for crawling man.

[@JustCallMePCra]

I love the Castle humm

[@boldrbangr9834]

Always good to see Sam the Man 😜. The portals are cool, but sticking with my OG set up for now.

[@hemitj]

Heck yeah, make the video about the Vitavon re-build

[@ExocagedRC]

I’m working on it.

[@Sub-Zero-id8ed]

日本のラジコンにはない、夢のある作りですね😁

[@705toys6]

Very impressive crawling! That axe combo should make it even better.

[@docmichar]

Those are great looking portals

[@rccrawlersmid-wales645]

Definitely like to see the other Ryft getting its upgrades. 👍 Looking forward to seeing what those portals end up on, too... 🛠🕺

[@just_inolredneck8319]

Of course I’m gonna watch the whole video!! Great job this thing has really changed

[@hemitj]

Thank you for another great video!

[@ExocagedRC]

Thank you for watching

[@eCommCEO]

Could I be 1st 🥇 noooo! Maybe?? Thanks for the vids my good man!

[@timcustomrc]

The portals really changed the ryft. Have some coming this week for my ryft build using an axe. Thanks for the video

[@ExocagedRC]

I think an Axe would be good with the portals.

[@timcustomrc]

@@ExocagedRC agreed, saw your video introducing the portals. Already have the axe with a 13t and it works pretty well, cutting in half will be a about perfect. The vitavon stuff looks really.good

[@timcustomrc]

@@ExocagedRC my new vitavon portals just showed up. Looking forward to installing and gett8ng some crawling in with portals and the axe

[@rcpete7055]

Always awesome content and enjoyable to watch.. Keeps me inspired in the hobby 🇬🇧 thanks buddy 😄👍👍 A nice powerful sensored motor for smooth power brother ✊👊✌️

[@Houleigan]

Cool! So you going to build a full Vitavon crawler now...CAN'T WAIT TO SEE IT!!!!!

[@Nick.Barnes]

i just ordered everything for my ryft from vitavon, would love to see you do an in depth build video on your buddies! thanks

[@rcpwolf7892]

Cool video 👍🏼

[@teamsargentrc6399]

I want 😫. Lol. Here take my wallet, & please- give me a set of them Ryft Portals! Lmbo.

[@docmichar]

Yes, please show us the installs

[@chalinp4886]

Man that thing is like a spider

[@pauls1816]

Looks like you need to build an 1/8 scale course now

[@Stealthfoams]

those r sick bro

[@GrimJerr]

I have a set of Yeti XT's coming for the shocks, and will be installing a Castle Copperhead 1406 Slate 3800KV crawler edition. Need to get new Driveshaft parts from Horizon, using the Originals in the Bouncer.

[@faubertshawn6319]

Love thé vidéo😁😁😁

[@mikep.9338]

Blue loctite folks 👍🏾

[@tonyromano6220]

I was looking at a Holmes Hobby 540XL today, I think I even guess 2100 was good KV!

[@74DuallyVan]

Voodoo Magic!

[@behr4204]

Awesome. Give me all part number pls! I just got trx4 upgraded. Love it. Now next toy!

[@johnpsensky1130]

AWESOME BUILD !! how much $ I want one exactly like that... I actually have a tube buggy crawler that actually looks like it ... I want an RC to match to take to Sand hollow..etc

[@ExocagedRC]

Buddy I’m afraid to add all this up.

[@rycryco2592]

Those portal gears look Capra based.

[@tonyromano6220]

10:54 holy!

[@johngookinsable]

Awesome build you have. Do the ryft axles fit the wraith r 60 platform? Or do the new portals only fit the vitavan ryft axles?

[@jhawk1985]

Cant wait to see what you do with a set of these axles with portals. Like a said couple weeks ago. A Capra with these axles will be 🤤

[@stickfurniture02]

Sounds like a 1/8 scale crawler.

[@robgoffroad]

Did I hear you correctly in that only your center diff is locked? Or are all of them? Sure looked like the tires were all spinning at the same speed.

[@ericchan8139]

Nice job, where to buy the front axles brass weight? Thanks

[@6sfullrcbycarlscustoms473]

So the Rear Axel is compatible with both the rear hubs and the steering knuckles??? Or do I Need to buy 2 Front Axels?? Pls lmk ASAP THANKS.👍Awesome Video

[@raymondrussell7085]

Will the portals fit treal axles

[@theSvrh]

I have been waiting for this video. I got my portals a few days ago but vitavon didn't send the pin screws for one of my knuckles. So i am glad to see this video. Can i change the direction of the motor on my controller? Or do i need to order a program card?

[@ExocagedRC]

if you have the stock esc you can just swap any two wires going to the motor to reverse it

[@theSvrh]

@@ExocagedRC thank you, when i get mine up and running again i will do that

[@np_detecting]

Are the axles aluminum? if so, where can they be bought?

[@runwithmikerc1047]

awesome video!! what garmin is that?

[@S9RUT]

I reckon you should definitely try the AXE 3300kv, it should do quite well now. And when will you be putting the Vitavon rear steering links on the back? It's killing my OCD 😆

[@ExocagedRC]

lol I think the axe would be ok now, I'll eventually get one back there

[@micaaelnunnm82a1]

Will a body fit over the cage

[@DoubleADay]

Have you seen a Gmade Buffalo gs02f? Now they have a pickup body coming out

[@ExocagedRC]

I think so, but not in person

[@DoubleADay]

Nice looking square body

[@atdakore]

whats that steering rod in the front?

[@ExocagedRC]

That the servo saver from Servo AF

[@6sfullrcbycarlscustoms473]

Are the Front And Rear Axel Housings backwards compatible???

[@stevenbarnhart5954]

When you say "don't believe Axial when they say its 32 pitch", what exactly do you mean? Will 32 pitch pinions not work?

[@ExocagedRC]

These gears are mod1. Not 32p so no a 32p pinion will not work

[@redbeard3303]

Where can I find the spring loaded steering link? I haven’t been able to find it looking on the web.

[@DoubleADay]

Hobbywing axe r2 3300kv and the Black Mamba's. Then find a gnarly rooted rocky slippery hill and go for it. In regards to your friends Ryft, just depends what he is willing to spend and what he wants to do with it

[@toddschmidt2436]

Where can i find these portals ? Please and thanks !

[@ExocagedRC]

Check the description for ebay links to them

[@theirishaxe9405]

With this much reduction you can throw on some 40 series rx4wd tires lol

[@danielnieckoski9025]

Ever think about putting those babys one a gen 8 or 7? I have a gen 7 and am looking for a really good portal setup any ideas anyone?

[@Buckuporbackoff]

Where are you from man I’m looking for some crawler courses around Louisville Kentucky

[@ExocagedRC]

North Florida

[@behr4204]

How many cost for everything?

[@endosrc]

can you do an upgrade series with an smt10

[@redndeyes]

Whats left on it that from original aside from cage lol. I wonder how much money you've pored into your ryft to make it as baddass as you have. Definitely a sick build but damn the cost. Love your channel man

[@Tuidkskiwjdhdbd]

Do that video with your friends truck but also with the weight can you also do the price that it would cost

[@juliosantiago7735]

Greetings from PR 🇵🇷 friend I have a machine of those black color I would like to mount those differential how much is the total cost! 💵

[@BNIRc]

Ok now I know how I need to build my ryft, just got save up like 1k 🤣😂😭

[@wolfgangrahm877]

KV?

[@ashleyconnelley556]

You cleaned the tires first didn’t you lol

[@juliosantiago7735]

💪🏼😳👍🏻🙋🏻‍♂️🇵🇷

[@stickfurniture02]

Long videos are fine as long as there is action most of the way through.

[@docmichar]

Everything starts at 420, lol

[@jonthomas8487]

Should have been portals from the factory. The gearing seems right now

[@oldmanmtb1443]

You want to sell it?

[@Cronicncars]

While trying so hard to lower the cg on the ryft in previous videos he just made it worse.

[@ExocagedRC]

LoL yeah it’s up now but not for long. I have plans for these portals in something else. But I set it next to a stock Ryft and believe it or not the chassis is still lower.

[@Cronicncars]

@@ExocagedRC have you seen my comment on another video. I wanna see one of those bad boys skip some water with the sand paddles lol.

[@behr4204]

Btw im deaf

[@rcjoe406]

When you have 2 of the same trucks you know it's a good rig...Somebody needs to make wider axles