I'm an old factory trained ( in Detroit) for GM and Mopar line mechanic. ( Drive train specialist) Really old-- nearly 80 haha. I'm totally versed in old school. I have a 93 highLuxl V 6 with axle problems. I came to your review to make sure there weren't any surprises I should be forwarned of. I used to be in racing and a VoTech Auto Mechanic teacher so I can say---- this was an instructor quality explanation. You have the skills to teach. Thanks for leaving no unaddressed details including an excellent description of the mechanical function of the Lock out mechanism. Dandahermit.
@wildbillfirehands10 ай бұрын
Thank you for this 3 year old video.
@kayaktote3 жыл бұрын
This was EXACTLY what I needed to see. Thank you for taking the time to explain it. Much appreciated!
@richardp3624 Жыл бұрын
Excellent refresher couse, Bubba.
@robertgreen6451 Жыл бұрын
Learned what I did not know. Thank You, Good Job
@tebger3 жыл бұрын
Well done, I wish all videos were of this caliber. Thanks.
@thomasoravec5282 ай бұрын
Hello! I have a 78 F-150 that has wolverine locking hubs. They are leaking badly from worn seals. I can't find a replacement. Do you think it is possible to find seals for these or should I by new locking hubs? I appreciate the help
@larrytate56053 жыл бұрын
GOOD VIDEO MAN, thats the way a tech help video should be done. just found your videos,... glad I did. very well done, you explain it so we can understand. THANX !!!
@macsgarage3 жыл бұрын
Awesome, thank you! Please share I'd like to get to 1,000 subscribers as quickly as possible.
@babayaga91023 жыл бұрын
@@macsgarage does this hub lock makes both tires spin at the same revolution. So if one tire loses traction diff won't send all the torque to that tire. so it does what diff lock does.
@zzddzzzz5 ай бұрын
Can you explain how locking the hubs PRIOR to engaging 4wd may cause damage?
@bradmcewen2 жыл бұрын
Fantastic step by step tutorial !
@9graff93 жыл бұрын
Perfect, I'm gonna grease up my jeeps hubs this weekend
@bobmitchell45322 жыл бұрын
@ about 10:12 you show how to keep the axel and drive shaft in the position that's far enough out to get the snap ring back on the spindel.Thank you for your considerate observations! I might add that you can also observe weather or not locking hub is working by putting it in the "LOCKED" position and then rotating the wheel (rotor).The axel will rotate if hub is working. Axel will not be moving while rotating the wheel when hub is in the "FREE" position.
@junkironjoe34602 жыл бұрын
I am building a buggy, would it actually hurt to leave the hubs locked almost all the time? If its not a good idea could you please explain on what it hurts?
@truckhogs11 ай бұрын
I removed my front end driveshaft on my 90 Blazer K5, seems front end tripping over itself ( hard to describe ), bought locking hubs. My question is do I use locking position or free position ? I DO Not have the front driveshaft installed anymore. Thanks.
@Tablesaw81820 күн бұрын
Definitely use the free position if you aren’t using 4WD
@petemackie565 Жыл бұрын
2001 Ford f250 Diesel . Why when i changed hubs and bearings , now when i put in 4x4 and lock hubs in , Then i try to turn around left side feels like it is jerking steering wheel? please help
@TheCls632 жыл бұрын
So you only need this if your truck is full time awd but if its part time you dont need it correct?
@macsgarage2 жыл бұрын
The full time 4wd trucks (np203) don't have lock outs. They need both ends hooked in all the time to work. Unless they have a part time kit installed. Part time 4x4 trucks have a variety of different ways to disengage the front axle. Lockout hubs like this were extremely common but not the only option through the mid 80s. By the early 90s this style of disengagement was uncommon replaced by other styles. In some trucks the front axle was even left engaged all the time and the transfer case simply disconnected the front drive shaft but everything still spun. What kind of truck are you asking about? Chances are it has a different style of disconnect.
@jamesritter Жыл бұрын
Great video. Thanks for posting it
@ADARKNEWWORLDSAGA4 ай бұрын
Do I need the spring with waren hubs?
@ralphanderson5621 Жыл бұрын
Great job I have to do this repair today.
@ohyeah56012 жыл бұрын
Nice Work Mac👍 Helpful vid👍
@galehess6676 Жыл бұрын
Tip: Don't fill hub with grease, it won't work. The 3 or 6 outside screws, Don't cut them, spray with liquid wrench and hit with hammer and then heat each screw 20s and out they come very easily, compared to being seized up to start like they would snap the hex bit or screwdriver bit, .. after 8 years of snow plowing in salt for 4 months a year... and never having been serviced mine seemed like they would not come out but with heat, came right out without breaking anything snapping off etc. I should have removed and cleaned up every 3-6 years... or even just when the R hub got harder to operate... forgot how easy this is after doing it in 2014 and mine corroded (could have polished it out with a dremel and kept running these another 10 years) and snapped a tab. My 25 year old oem ford f250 plastic turning /engagement grab point came out in my hand after it progressively got harder to turn causing a tab to snap inside. What was apparently happening was corrosion of the Aluminum around the place the plastic turn knob/grab point seats into the hub cover, creating friction from the buildup of corrosion material to the eventual point of damage. So, Warn Premiums are going in because I have them on the 22 year old truck and they're super nice and Napaonline had for 298 shipped (I got an email today saying they were delayed, but called napa www and got through to Will in India and he actually figured it out and they will arrive tomorrow, so considering all NAPA stores, Autozone, etc. online are sold out, I got lucky I didn't have to go with cheap junk knock offs like MM, etc.).
@whyiterp Жыл бұрын
what size is the hex head outer 6 bolts?
@rarebreed67033 жыл бұрын
My hubs are loose and don't know if that's normal?
@reggiejohnson8149 Жыл бұрын
Great video I have one to repair now I can thanks
@JohnDoe-iq4kz3 жыл бұрын
When both hubs are locked, do the left and right wheels turn at the same rate, in sync with each other?
@macsgarage3 жыл бұрын
It depends on the style of differential in the axle. The locking hubs connect or disconnect the wheels with the differential. A vast majority of axles with locking hubs have an open differential which allows the wheels to easily spin at different speeds even though they are mechanically linked. In those systems you need both hubs locked in order to get power to either one. I'll do a video about differential types at some point.
@dynamicrecordings51423 жыл бұрын
you should do the hammering before you loosen the allen screws. Breaks the friction a little better, i think. best, bless,
@glennbrightwell18363 жыл бұрын
great job explaining!!!!!!!
@cornellterry64843 жыл бұрын
I have a 04 f250 if I forget to unlock my hubs and keep driving will it miss my 4wd up
@macsgarage3 жыл бұрын
If everything is in good shape it will be fine. I personally don't like running freeway speeds with them locked in but even that shouldn't really cause a problem.
@cornellterry64843 жыл бұрын
@@macsgarage so you saying if I put my truck in 4wd and I forget to unlock the hubs it will not miss up nothing
@timesthree57573 жыл бұрын
@@cornellterry6484 no while the front diff is open the transfer case might be closed . Which mean you could tear up yer transfer case.
@thebordenfamily64132 жыл бұрын
I have an 04 f250 with lock ins like this. No one will touch it. So I’ll do it on my own
@farmerdude35782 жыл бұрын
Thanks brother.
@bradh61853 жыл бұрын
Great video.
@caddydaddy67283 жыл бұрын
Nice job ditch the mask👍👍
@rrchicken117 Жыл бұрын
He probably wears one while alone in his bathroom too