4x4 Willys Mini Jeep Car Build 4x4 Willys EP 11. Rear Axle 4 Link Suspension Mig Weld Plasma

**Next Episode!** • 4x4 Willys Mini Jeep C...
Olly Builds a miniature kids car. It's a 3/4 Scale WW2 Willys Jeep built from Suzuki Jimny and Honda Quad parts. The Jeep will have fully operational Four Wheel Drive, with Locking Wheel Hubs and will run on petrol. The Ideal Kids Project at Home, and the Ultimate Kids Toy to Keep Kids Occupied.
In this Episode, we show how to Build a Mini 4x4 Car, how to Build and Make Suspension Mounts, How to Build and Make Coilover Brackets, and also how to Build and Make Engine Mounts, how to use a Metal Folder Metal Guillotine with Metal Roller, how to use a Mig Welder, how to use a Metal Grinder, how to use a Cone Drill bit, and how to use a Pedestal Drill. We also Show how to Fit and test Suspension and Fit Engine.
This Kid Builds his Own Car. This Kid Owns his Own Car. This Kid Drives his Own Car!

[@user-ko3ho6oo9k]

Красиво и умно и руки растут из правельного места ,респект....❤❤❤❤❤😂😂😂😂🥰🤩😍🤔🤫😒😏😎🥳🤠🙈🙉🙊💘💘💘💣💥💯👍👏👏👏👏👏👏👏

[@oliverbanford]

Thanks for the comments and feedback, very much appreciated 👍 The Jeep is close to being completed now so you have lots of episodes to catch up on... enjoy! 😊👍

[@tyokreasihomeindustri5596]

Pekerjaan yang bagus bung....

[@oliverbanford]

Thanks mate 👍

[@UHO221]

❤️🔥❤️🔥👍🏿👍🏿👍🏿👍🏿👍🏿👍🏿🇮🇩👏

[@oliverbanford]

Thanks for watching 😊 👍

[@UHO221]

@@oliverbanford .iya saya mau.tuh kaya itu harga berapa....👍🏿👍🏿🇮🇩🙏

[@mutluturan8369]

Süper olmuş

[@oliverbanford]

Thanks for watching

[@chrisokyere4329]

I love it🎉

[@oliverbanford]

Thanks, glad you like it! You have lots more to watch.. 😊👍

[@duryodhanyadav874]

Vary good sir

[@oliverbanford]

Thanks for watching 🙂 👍

[@vassdalencustom8689]

Its comming together nicely! Keep up the good work 😎🙌🏻

[@oliverbanford]

Can’t wait to see your next episode! 😁🤘

[@chrisokyere4329]

Good luck ❤

[@oliverbanford]

Thank You, and thanks for watching 😊👍

[@BestKiteboardingOfficial]

That new chop saw looks seriously capable,

[@oliverbanford]

Yes, it's a beast. Very clean and accurate, should speed things up nicely! Thanks for watching 👍

[@phercellnascimento5603]

Very good job man,ir is awesome

[@oliverbanford]

Cheers..! 😊👍

[@EduardoJimenez-rk8nw]

👍👍 FABulous !!!

[@oliverbanford]

Loads more episodes on this build already on KZbin, keep watching and Enjoy! 😉 👍

[@antonimocil7449]

Kreatif sampen cak salam teko indonesia

[@oliverbanford]

Thanks for watching 🙂 👍

[@kipzhappylife6658]

Superb

[@oliverbanford]

Thanks for watching 👍

[@rashidkhan602]

❤

[@oliverbanford]

🙂👍

[@dockmasterted]

My friend it looks to be built better than the full sized jeep!

[@oliverbanford]

Thanks for watching! 😊. Lots more episodes to watch after this one, we're almost ready to start on the body now... Thanks for commenting.. 👍

[@stevenpleasant5834]

Hi real good fab skills you have nice build too I want to build some thing like this some day soon also I wish I had a Evolution saw like that it would help me out doing my fab work any way look forward to seeing this done.

[@oliverbanford]

Thanks for watching, connecting up the driveshafts and maybe some bodywork soon 😄👍

[@Mascara_Branca1466]

You should add an turbo so it could have more speed and torque

[@oliverbanford]

Now that would be a beast! Thanks for watching 👍

[@HarishankarMeena-he2fo]

​@@oliverbanfordनमस्ते जी राजस्थान में किमत,बतआओसर,हमलएगए,

[@gameratx112]

epico

[@oliverbanford]

Thanks for watching! 😊👍

[@p165ter]

Keep up the good work. Looking fantastic.👍

[@oliverbanford]

Thanks for watching, more to come! 👍

[@Marcos-wn5rb]

😎

[@oliverbanford]

😎

[@tOxIc_TrEaSuRe]

what is the T-case from ? what are the axles ? thanks

[@oliverbanford]

T-case and axles are from a Suzuki Jimny, outer axles are cut down and we used just the short side inner axle (no inner axles were harmed during the making of this series.. :) Visit our Channel page, you can see this build from the start, and even see the donor vehicles.. 😉 I hope you've watched the whole series, we've just fitted a machine gun to this mini jeep, the next episode is due to be publicised this Friday. Thanks for watching 👍

[@giftncube2557]

Good job, how can I get hold of you if I want one?

[@oliverbanford]

Hey, Thanks! I'm not manufacturing these, just building this one for my son and his buddies. If I ever decide to get into business I'll let you know.. 😉 Thanks for watching 🙂 👍

[@user-rs4ng6kt9f]

ايي نوع من الجير بوكس مستخدم

[@oliverbanford]

It uses the trx250 Quad gearbox which has a shaft output. This is mated to the Suzuki Jimny transfer box to provide full 4 wheel drive. Keep watching, you have lots more episodes to go...! Thanks for watching 🙂 👍

[@Prikollar45]

Senkyu

[@oliverbanford]

You're welcome.. 😃 👍

[@irsumarna2027]

Assalamualaikum.maaf pa saya mau nanya berapa dananya dari Suzuki carry jadi Jeep Willys. Mohon jawabannya. Terima kasih.🙏

[@oliverbanford]

I haven't kept a tally on costs unfortunately, but a few thousand pounds. Thanks for watching 🙂👍

[@tesorodeloriente9570]

Where I can buy ?

[@oliverbanford]

It's a one-off at this point, built for my son and his friends. Keep watching, lots more episodes already on KZbin. We have painted it and are now fitting the machine gun.. Thanks for watching. 😊 👍

[@gorasandhugorasandhu4594]

Enjion fitting part and front axel and reaor axel part vidio give on youtube

[@oliverbanford]

Thanks for watching!

[@totoksuharjo6590]

Di jual to buat sendiri mas mbl mininya

[@oliverbanford]

Thanks for watching 👍

[@herphermits]

How much did you spend all in this project? I have a 2009 Kia Rio SX here (perfect engine and tranny condition buy rotten unibody) that i wanna cannibalize and strip and convert into a mini jeep too.

[@oliverbanford]

The Jimny cost me £1000 (seized engine and rotten body), and I picked the quad up for £300 (non runner). I've spent around £1500 so far on wheels, tyres, shocks, steel (box section and sheet). Still a bit to go (dials, lights, windscreen etc. etc..) but most of the structural spend is done. There are quite a few episodes after this one (links in description), we are now halfway throught the body build. Next episode (16) covers body panels so really starting to look like a Willys Jeep now. 😍 Thanks for your comment, and for watching! 👍

[@phercellnascimento5603]

Sorry embromation,but not speak english😂

[@oliverbanford]

Thanks for watching..! 😊👍

[@user-mb7td2kp1h]

Я понял,что он варить металл умеет,только зачем это показывать в течении всего времени?

[@oliverbanford]

It's a steel chassis. So difficult to show its construction without welding.. Keep watching as the finished jeep is amazing. It has everything, including machine gun 😊 👍

[@Dr.azoz507]

Can you help me make a car like it via WhatsApp

[@oliverbanford]

Keep watching, there are lots more episodes that show you step by step how to build it.. Thanks for watching 🙂 👍

[@Dr.azoz507]

My friend sometimes I need to measure the fabrication structure and the used tool kit and parts

[@oliverbanford]

@Dr.azoz507 No problem, happy to provide any measurements you need. Just drop your questions in the comments, this will help everyone 👍

[@Dr.azoz507]

Thanks

[@user-vf3re1qi1h]

Для себя чисти вари а лучше расскажи что почём