I got a jaguar XF 5.0L (same engine). Suspected injectors clogged or "varnished" and just took it to the JLR techs for injector cleaning. They used some tools that spray through the injector. Also additive in the tank. Car is running rich now but no more misfire codes. Hope I don't have to change the injectors as I hear they are expensive. Either way thanks for hte video as I am a technical guy my self and love to learn about what is the job being done. Great tool to take out and install those injectors. I would only use a JLR approved tool for that job based on the High PSI sensitivity.
@mw3designs17 күн бұрын
I’ve been trying like heck to get my #2 injector out (2011 LR4) and it won’t budge. Do you have any tips for removing a stubborn injector? The truck is in restricted performance mode and not drivable until I get this injector replaced.
@understandthis4634Ай бұрын
Do you have to program after installing new ones?
@nyplantings2420 Жыл бұрын
LOVE these videos! So I have the supercharged V8. Is this more difficult job? Thanks.
@anthonywilliams41005 жыл бұрын
Thank you!
@deizle615hitz3 жыл бұрын
I got a 2010 xf 5.0 sc and the injector is stuck in
@nepicness Жыл бұрын
Use the slide hammer harder
@DallasAutoDiag3 жыл бұрын
Is the 2000 psi on cranking also or just running? I'm getting only about 100 psi at cranking. I want to see if I have a bad mechanical fuel pump or 100psi at cranking is normal untill engine starts. Thanks in advance.
@guidogutierrez34622 жыл бұрын
Can you guys put video how do valve cover in lr4 5.0 v8 normal not sc . Please many 5.0 hse not videos of val e cover
@nyplantingsgardendesigners56453 жыл бұрын
Good vid brother. Liked and sub'd. Couple questions please: Do I really need to pull the supercharger for a drivers' valve cover gasket replacement? Is it possible overfilling caused this sudden leak? The car was fine for 70k miles. Thanks, Todd
@ianchmp5 жыл бұрын
Any tips for removing the fuel rail? I’m afraid of damaging the rail, injectors or valve cover if I use too much force to pry it off. Thanks!
@lutronc44122 жыл бұрын
What did you end up doing? My fuel rail is seized on injectors.
@hawaiiyamat2 жыл бұрын
@@lutronc4412 use a rope or nylon tie down strap
@vietec Жыл бұрын
I ended up using a BFS and applying leverage while wiggling the rail off. I was in a similar pinch when a kind LR tech on reddit told me that it was the only way. Once it gets moving the whole unit comes off easily.
@GunsAndRovers Жыл бұрын
@@vietecWhat is a BFS?
@vietec Жыл бұрын
@@GunsAndRovers Big Fucking Screwdriver
@BMWUS2 жыл бұрын
I keep getting a cylinder 5 misfire code for even on after a fuel injector and spark plug job filters and Mafs. Only on idle when starting. You can barely feel it. Anyone have any idea?
@davidhall3747 Жыл бұрын
Did you replace the Coil Pack?
@HoweDoYouDo19994 жыл бұрын
Varnish build up........know how long I haven’t heard that word my god 😂 yep that’s it I’m officially a senior 😂
@lynxstarautomotive2084 жыл бұрын
I’m 37, use it all the time. That is what it is called? Varnish.
@landroverzone98246 жыл бұрын
Do you think This injectors fit on discovery’s 2?
@atlanticbritishrp6 жыл бұрын
No, the fit the following Rover models: LR4 / Discovery 4 V8 5.0 Liter | '10 - '13 Range Rover Full Size | '10 - '12 Range Rover Full Size Supercharged | '10 - '12 Range Rover Full Size V8 5.0L Naturally-Aspirated | '13 - On Range Rover Full Size V8 5.0L Supercharged | '13 - On Range Rover Sport | '10 - '13 Range Rover Sport Supercharged | '10 - '13 Range Rover Sport V8 5.0L Supercharged | '14 - On
@robertotorres35876 жыл бұрын
I have 2013 RR sport supercharger I bought it with 24000 miles first $7,000 fine then a bad injector I changed it and now again at 40000 miles another bad injector what is causing this any ideas
@georgecreamer6 жыл бұрын
Try BG 44K cleaner
@GNogueira835 жыл бұрын
You have to remove the valve covers for replacing an injector?
@nepicness Жыл бұрын
No, you can just replace an injector without taking the valve cover off
@ralfbond2585 жыл бұрын
jag ajx v8 !
@frederickfrancis29873 жыл бұрын
You don't teach people from middle you teach from the top to the bottom