So - 2 years down the road - would you still chose the same options, or were there some significant developments? Maybe it's time for another video of this kind. Just thinking out loud 😋
@CajunManNick19808 күн бұрын
Pretty much. There have been improvements to all the systems mentioned, but they are all still solid with tons of programmability and the cost is even cheaper for the Fusion and 1080, with both having more features (the Fusion Pro has higher KV and more programming options, the Fusion SE is inexpensive, and the 1080 has got more features for the same price point) and Holmes Hobbies still banging out a solid product.
@tmccarrico71872 жыл бұрын
I'm new to this rc hobby but dang this guy's channel is gonna have me being an expert in no time! Thanks so much for all the great content really help me in deciding on what to purchase for upgrades
@RCCinematic2 жыл бұрын
I’m running the hobbywing axe 3300kv in my Trx4 defender for about 2 years. That thing is a beast, takes everything. I bash, crawl, trail, go swimming with my TRX4 and nothing stops it!
@RCReviewChannel2 жыл бұрын
It's so good it changes the vehicle into an all purpose crawler basher. You can change the pinion too to a bigger one for more pop.
@wgmainline98122 жыл бұрын
Thank You for all you work in these reviews!!! One of my favorite channels for sure!!! 1080 and a crawlmaster is hard to beat for the price. I have the Castle Mamba X with a Slate 2850 but the Hobbywing Axe is by far my absolute favorite setups. Excellent Drag brake quiet operation Bluetooth programming excellent low speed control and an easy on/off switch. Only downside is the soldering of the wires on the ESC and only compatible with their motors. Again thank you for all the excellent reviews!!! Keep up the great work!!!!!
@RCReviewChannel2 жыл бұрын
Right on. This is very much appreciated.
@1521joe2 жыл бұрын
@@RCReviewChannel hey bro, can you do a video for best ESC & motor for 1/8 scale and 1/7 scale on road rc cars, like the new Hobao vte2 1/7 scale or maybe the limitless, thanks.
@danielbrown77962 жыл бұрын
@@RCReviewChannel hey I'm looking to upgrade my trx6 motor and esc to get a little more speed but don't wanna lose my crawl ability any recommendations. I like to play in the snow mud and puddles
@derricksazrc34112 жыл бұрын
it's nice to know hobbywing has stepped up to the constant torque game. You answered a question I had with the top brushed esc. Thanks Brother.
@GrimJerr2 жыл бұрын
I have 2 HW AF R2, 1 540L 2800kv and the 550 3300kv, and 2 Castle Copperhead 10 Crawler edition slate 1406 3800kv, Both are excellent systems and you can't go wrong either way. I tip toward the Hobbywing AXE FOC due to Integrated Bluetooth for ESC, and still much quieter than the Castle system which has been much improved for noise over previous systems.
@m.a.s.hq8715 Жыл бұрын
I heard that hw 2800 better than 3300 in terms of torque for crawling... do u have any idea ??
@gm33532 жыл бұрын
the FOC has been a game changer incredible levels of control as well, great drag brake too. love my AXE
@fishdogg442 жыл бұрын
Really low your videos! My 6 year old and I got into the hobby last year and it quickly became a full family hobby. I’m doing my first build now and you are a wealth of information! Thanks for all you do!
@RCReviewChannel2 жыл бұрын
That is awesome!
@micahjared80822 жыл бұрын
From deeeep in the Mountains of NY 🍻 Thank You for your SUPERB content! Just got back into RC after a 20 yr hiatus. Started in the late 80s till around 2000, and maaaan how things have changed! Just got my TRX Bronco today (and got the Losi Drag car coming soon 😂) You are a wealth of info that Ive been relying on. Could watch this channel all day and night, and no doubt I will. Cant wait to check out the TRX stock for a bit ; and slowly upgrade. TY Brother!!!
@tangosierra12 жыл бұрын
I run the Hobbywing 1080 and Holmes 550 sport motors in all my crawlers.
@RCReviewChannel2 жыл бұрын
It is the goto standard for us too. Often, much more expensive brushless systems are not significantly better on most rigs.
@jeffsnowden43232 жыл бұрын
@@RCReviewChannel but which is best for a sport, 21 or 27 turn??
@gregbakke82962 жыл бұрын
Excellent reviews. Installed the hobbywing 1080 in my trx4 based on one of your prior reviews. Love it! Now I gotta look at installing a Holmes Hobby motor 😉
@RCReviewChannel2 жыл бұрын
You're doing it right.
@stevemcclain33452 жыл бұрын
Lol me to you definitely sold me on the hobby wing 1080 on my second trx motor so I’m gna get me Holms hobby motor
@garybeckwith9045 Жыл бұрын
Thnx for the Holmes hobby reference! I live in Japan and their service is superb!
@jeffparryncc17012 жыл бұрын
Hobbywing Fusion 1800 2in1, perfection :)
@meadowlarkgal232 жыл бұрын
Excellent suggestions and explainations for motor and ESC installation in my first kit build (TRX4 Sport) I always enjoy your videos, you are a great teacher.🌻
@thesillypig7852 жыл бұрын
For brushed the Hobbywing 1080 can't be beat, and the price is so good. I put 4 of them in my cars this year, in my Tamiya CC01, CC02 and the Quadtrack and even in my Kyosho Javelin buggy. In my main crawler, good old SCX10, I put the Hobbywing Xerun Axe 540L R2-2100kv and damn it's amazing because you can adjust all settings on your phone while actually having the car in use. No programming card to connect, not having to take off the body or anything is just brilliant. Just open the app, adjust and keep on driving. Best thing ever.
@RCReviewChannel2 жыл бұрын
Very good insight
@steveblackbird2 жыл бұрын
Thank You for the review Francis. I know two things. The stock system in most crawlers is enough to get you started. Second, after I installed the Hobbywing Fusion system in my SCX10 it completely transformed how it drove. FOC is cheating to some but the effortless control is amazing. One I'd definitely recommend. Great that it's switchable too. Happy Holidays mate!
@jeffreyd51292 жыл бұрын
Hi, just yesterday I placed an order for a Furitek LIKO Pro Brushless Combo Kit from Ebay for my SCX24 Jeep. The total price was $130.84 with free shipping. So excited can't wait to receive it and install it! 😁
@RCReviewChannel2 жыл бұрын
Welcome to the club.
@jeffreyd51292 жыл бұрын
@@RCReviewChannel I received it installed it, OMG the slow crawl modulation is amazing!!! I recently upgraded it with Treal weighted beadlock wheels gray/silver with HOPLEX 1.0 55mm by 18.5mm soft rubber crawler tires, Treal aluminum 7075 high clearance links, Treal aluminum gray center skid plate, Treal black aluminum steering rack link set (whew)😅. I also put in a GoolRC 5G Digital high torque metal gear servo, Mojuego 4pcs brass wheel counterweights, Aimrock 2-pack 8.4g brass diff covers and Coda Racing 4pcs 7mm brass hex wheel hubs. I also installed Treal Brass Steering Knuckles and Treal Rear Brass Counterweights 20g. And finally I made a weight from lead sinkers melting them into a 32g weight and mounted them on to the steering servo for a total weight of 504g. I also want to make an indoor crawler course!
@jooonsRC Жыл бұрын
I watch the channel alot and try to help my local community with this knowledge in rc
@hyperlogos2 жыл бұрын
My Fusion is in the mail right now, where USPS sat on it for a week with no status updates. Got my 3s batts already. I'm currently on the stock ESC (in my gen8 v2) and a holmes trailmaster sport 21T. Can't wait.
@RCReviewChannel2 жыл бұрын
The waiting is the hardest part.
@mgscheue2 жыл бұрын
Great recommendations. Another: the Mofo Torquebeast 2 is a drop-in replacement for the stock SCX24 motor. Just need to cut one leg off the battery tray. Excellent brushed upgrade.
@RCReviewChannel2 жыл бұрын
We will try that for sure!!!!
@goreyboggs2 жыл бұрын
This is awesome I have been researching motors & speed controllers all day for my new gate keeper kit!!!
@RCReviewChannel2 жыл бұрын
Great to hear
@bajanredman32502 жыл бұрын
Excellent and informative review as always. I must say its because of you I bought my Traxxas trx4 Sport. So far it has not disappointed. Great crawler! Now you have me thinking about motor and esc combo upgrade! Keep up the good work. I really enjoy the information you share. Thanks!
@RCReviewChannel2 жыл бұрын
Great to hear! Takes a bit of effort to collect my random thoughts. :)
@AcidAngel5012 жыл бұрын
Fusion 1800kv is perfect for a Trx4, fits right in and makes awesome power and control.
@bajanredman32502 жыл бұрын
@@AcidAngel501 Ok thanks! Will look into it
@joshkelly63932 жыл бұрын
i just ordered a hobbywing 1080 esc and holmes hobbies trailmaster sport 550 21t for my trx4 sport kit build
@kennethwelty11902 жыл бұрын
1080 is my go too ecs. I have 1 Holmes motor in my Gen-8 V-1.
@RCReviewChannel2 жыл бұрын
Sooo good for the money. That esc is money!
@d.khoung3592 жыл бұрын
I love my tekin RX4 and ROC HD combo. So strong I usually have to turn it way down.
@RCReviewChannel2 жыл бұрын
good to hear.
@seanbristow6757 Жыл бұрын
Copperhead 10 combo Fer my top contender on my trucks ,if not I go fusion pro 2300 on trail rigs works minty and cheaper in $ department thank you for this video was Kool to see some of the different ways to go ,should do 2in 1 comparison as well happy trails mate
@bonesworld71782 жыл бұрын
Brother, thank you so much for all of your content. You cost me a lot of money hahaha. I did not hear your recommendation on the trail master sport which turn? I'll. Obviously I want slow speed. Speed controllability but good punch. Can you make a recommendation on which turn for the trailmaster? Crawmaster no right?
@edselnaguit2 жыл бұрын
Hi. Question, can i use the hw 1080 on a traxxas slash 2wd using the stock brushed motor? Or the 1080 only applies to crawler? Thanks in advance.
@bozhang43782 жыл бұрын
Holmes trailmaster sport is going for $59.50 on Amazon as of Feb 2022 vs $25 when the video was shot......
@CajunManNick19807 күн бұрын
I just got one from a hobby shop in Louisiana, $30 out the door with leads soldered on. 550, 21 turn Trailmaster Sport.
@Bigbillyrayfan Жыл бұрын
Torque at Super low rpm with outrunners comes from the length of the lever arm more so than the intertia.
@SnarkyRC2 жыл бұрын
You should add the Carisma ARC-2 ESC to the list. It's one of the best brushed ESCs on the market. It's the same price as the Hobbywing 1080 but, with more settings and a better drag brake. It also has a better wiring layout and a lower profile. Another good brushed ESC is the Radiolink Cool 9030. Lots of good settings and can handle up to 4s.
@hobbyzonemodelismo2 жыл бұрын
What about the new Furitek 1/10 stuff lizard 10 esc and motor with FOC as well? I am very curious on its performance against Hobby Wing.
@jeeplivion2 жыл бұрын
Love my copperhead/slate combo. Waiting for my sensor wire upgrade!
@RCReviewChannel2 жыл бұрын
What, no sensor wire and you got it working on a crawler? That's the great thing with the Copperhead is it can work both ways.
@jeeplivion2 жыл бұрын
@@RCReviewChannel oh I still have the one that comes with it, works okay until it gets wet. I'm getting the castle harness that direct connects the copperhead to the slate.
@abrahammagana22862 жыл бұрын
I always learn so much from your videos. Thank you! What motor and esc combo would you recommend for a stock TRX6?
@memphisness42092 жыл бұрын
First of all love your videos and all your input. You are much more real than the other guys. I wanted your opinion on what esc should my friend put into his scx6. It's a new truck but he has had nothing but problems with the esc. Would appreciate and help.
@michaeldorich4485 Жыл бұрын
It's a great little vehicle. It would be great if these cars were waterproof. I live in an area where we get snow. We already had snow and there are posts with drivers running their TRX4M in snow. Tower Hobbies carries some of the FMS cars. Are there many parts that are interchangeable?
@jeffakers97522 жыл бұрын
Hobbywing 1080 is a lot easier than you think. I have one. Super easy to program. But that just my opinion. And yes Holmes hobby motor. Great video.
@RCReviewChannel2 жыл бұрын
It's not hard especially after the first time but those numbers and tiny fonts :). Also it's not like an iphone app for sure.
@danielchan8548 ай бұрын
Hi, have you tried the rhino ve80 bl combo? Here in the philippines and also thailand almost all the competitive crawlers use this for super low cg setups
@paulmastone68862 жыл бұрын
Interesting list. Team brood is much better choice. Bruushed or brushless and outboard motors
@paulnorton744411 ай бұрын
Great vid as always could you pls recommend a reasonably priced esc for a 1/10 crawler with a 390 brushed motor. Was gonna get a hobbywing 1060 but i think they are only for 540 motors.
@richardcranium53932 жыл бұрын
I really recommend the tsky or T-Rex, less than 20 bucks, you can't go wrong.
@kenskens692 жыл бұрын
Nice , my friend by any chance you have a video or Tutorial on how to set up different sproud or opinion combination somthing like that im having problems ,will like to set it up correct thanks
@RC_TRX46 ай бұрын
Hello. I don't know English. That's why I didn't understand what you said. Which one is best for trx-4 land rover defender? Thank you for your answer.
@knoopx2 жыл бұрын
i dont understand why car electronics are so expensive. I switched over to drone escs with open source am32 firmware over a year ago and not looking back. For ~$50 you get a compact, passive and programmable 60A esc with a 1500kv 3542 brushless stubby and 6 channel receiver which performs as good or better than +$150 solutions. You can even switch to brushed motors using the same esc (i have a dual esc setup on a moa).
@knoopx2 жыл бұрын
@@themountain59 yep, that's mostly the only limitation (amp rating), as a heavier build might pull more than they can deliver.
@RCReviewChannel2 жыл бұрын
Competition and innovation is poor in car electronics. We're lucky to be using drone chargers and batteries now. So cheap and so good!
@P0110X2 жыл бұрын
great list. I personally like the hobbywing xr10 combo, using it with a a rock racer, a rally and two drift cars, obviously with different kv for each operation, unfortunately it's not waterproof but is a cheap combo.
@RCReviewChannel2 жыл бұрын
The whole Hobbywing line is incredible. Even the monster motors.
@tristianmason47302 жыл бұрын
Thx for this video I keep Burning electronics up bc the faults don’t match up
@RCReviewChannel2 жыл бұрын
Glad to help
@zonegamma81972 жыл бұрын
HW1080+ Holmes Motor is soooo good for the price
@RCReviewChannel2 жыл бұрын
It has 90% of the benefit that a brushless delivers.
@welcome2myworld1.o892 жыл бұрын
Bro I love you no homo. You literally read my mind! Yesterday I was looking for another motor / ESC setup for my trx-6 because my hobbywing quicrun Fusion 1800kv does not allow me to give more juice to my servos because I'm still using the Traxxas receiver. And I can't run my trx-6 lights because I can't power them because you can't plug in the Traxxas high power BC because you can't power the BEC using the darn motor! Anyways now I think I know what to get LOL
@RCReviewChannel2 жыл бұрын
Ha, ha, I'm very happy to help.
@kennethwelty11902 жыл бұрын
I enjoy your channel good information. Keep up the good work. Have a good year in 2022.
@RCReviewChannel2 жыл бұрын
Thanks, you too!
@Mikey19622 жыл бұрын
Great video. I've purchased the Hobbywing 1080 ESC twice now based on your recommendations in the past. It really is a great ESC for the money.
@RCReviewChannel2 жыл бұрын
I’d buy it at twice the price
@rcarty4192 жыл бұрын
Always just professional honest unbiased opinion. 👍
@RCReviewChannel2 жыл бұрын
I appreciate that!
@jephtheduck87702 жыл бұрын
I use a sensorless hobbywing 3200kv (3660 SL I believe) in my trx4. In my personal experience it is fine is sensored really necessary for crawlers? I do not have any cogging issues or anything I guess it is nice to have though
@RCReviewChannel2 жыл бұрын
For slow crawling and technical stuff, sensored is definetly needed. The TRX4 is not quite a high end rock crawler. Also, it's 2-speed tranny really helps it out with very low gearing.
@kollinsendall12 жыл бұрын
I know it’s been out for a long time but I can’t believe you didn’t review the Holmes BR-XL esc! That thing paired with their 540 magnums are heavenly
@johnjones21942 жыл бұрын
Hello please tell me if 4000kv would be much for a gatekeeper. Some crawling and wheel speed thanks. Your videos have got the best info buddy.
@EvgeniyRC2 жыл бұрын
Очень интересно. А где же в этом списке всеми любимая Мamba X ? Я сам пользуюсь Hobbywing Axe 550 и постоянно слышу от своих друзей - Попробуй Мamba X - она хороша ... Им точно не понравится ваше видео.! А я согласен с вами на все 100%. терпеть писк Castle - это невыносимо.😉
@Nordlicht052 жыл бұрын
The hobbywing 1080 is great. But I use some random brushed 540 with 35t on 3s... I am happy. But I am not the typical crawler driver.
@RCReviewChannel2 жыл бұрын
Yeah, ESC is the first priority in an upgrading the motor system.
@dsimms6 Жыл бұрын
What do you recommend for a motor esc that can do some rock crawling but also rock racing kind of like what the Ryft can do?
@gerardodominguezcalderon18692 жыл бұрын
Hi there... I just got me an upgrade of the 1080 and a holmes hobbies 550 sport for my enduro rig; but there is a problem, the motor runs in the right direction but the speed is off... really fast backwards and slower forward!!! I already double checked my settings twice and they are all good. Maybe you have a solution. Thanks
@Rcworldshop2 жыл бұрын
The hobbywing fusion is best.. quality functionality compact design run time time
@RCReviewChannel2 жыл бұрын
Yes, it is unique and offers a compact and lightweight solution ideal for some rigs.
@davidmarchand-smith41052 жыл бұрын
Thanks for the review! I'm curious... what are your thoughts on the Spektrum Firma ESC/540 motor combo for crawlers?
@doubleaaaron2 жыл бұрын
I enjoyed this video. Great information! I have been wondering about a few upgrades to my gen 8 v2. I was thinking about the Holmes hobby 21t 550 sport. I hear the drag brake works well if you keep the stock esc and use that motor. This is off topic as it's for my shelf queen skully 2wd stampede, but I have been looking for a faster motor and possibly esc combo for to keep it brushed. I have a ton of brushless bashers so I was just looking for something different if anyone has a suggestion. Thanks very much.
@RCReviewChannel2 жыл бұрын
Change the Redcat ESC for sure with the 1080. The Redcat motor is not bad for that vehicle.
@zeekmx19702 жыл бұрын
I know you'll think I'm nutty yet I won't use anything except Traxxas certified parts unless there's no other option. Traxxas has given me more than I've paid for even if I got scammed a tiny bit. The box showed sunset paint job, When I opened the box it was the red on black. I wasn't deterred just more determined to achieve perfection. I use the red on black body as my accidental bashing body and have my show room black edition body kit with sticker pack NOT Applied when displaying.
@kollinsendall12 жыл бұрын
I’m very surprised the Holmes Hobby Magnum series isn’t in here. I’ve never had a motor with such smooth startup and torque.
@RCReviewChannel2 жыл бұрын
ahh, haven't tried it. And couldn't put too many Holmes motors in this list. :)
@justanrcguy2 жыл бұрын
Thanks man, for all your videos 💪🏻💪🏻
@RCReviewChannel2 жыл бұрын
Glad you like them! Not easy but someone's gotta do it.
@matthewmulhern70382 жыл бұрын
thank you i was struggling and i'm just going to make a switch what would you recommend i have a heavy trx4 and i would like a 7.4 bec compatible
@sitlos.2 жыл бұрын
Castle creation copperhead is what I have in my trx4 and it’s heavy. Works amazing!
@Se530d2 жыл бұрын
Hobbywing fusion works well
@matthewmulhern70382 жыл бұрын
@@sitlos. what motor are you running
@slick15232 жыл бұрын
I just got a hobby wing fusion on Christmas and I love it
@sitlos.2 жыл бұрын
@@matthewmulhern7038 I have the black limited edition copperhead combo, I think it’s the 1412 3200kv Sensored combo. Lots of torque and speed with 3s. Can do 4s also. My rig has brass upgrades anywhere they can go besides metal axle housings. So it’s heavy and that set up is about perfect. Great for trailing and great for rock crawling. Highly recommend if u can spend about $200 for electronics. Think it was $189? If u go hobbywing combo I would go for the v2 sets. Imo anyhow. Either way u go tho, good luck 👍
@bluestone752 жыл бұрын
Will any upgrade such as esc upgrade.... affect my traxxas link controls ? Thanks for all your videos.
@TheFuentesv2 жыл бұрын
question, I just start into the RC world and bought a WLToys 12429 and will like to upgrade the motor and ESC, I will go with the hobbywing 1080 ESC, which motor do you recommend from Holmes hobbies? my style will be 70 crawler 30 trail. So trailmaster 550 27 tor the 45t? Also, do I have to change the remote control? thanks
@michaelmunger76889 ай бұрын
I am building F450 for speed. What would you recommend for motor and gears?
@Jamstorm-e5m Жыл бұрын
I’m new and trying for a good esc and motor for my 1/10 grave digger monster truck.. brushless
@zhugzug2 жыл бұрын
I was told that for my Crawler that if I got a brushless motor for it, that it may be too fast and twitchy for rock crawling. Is this true? I have a traxxas two a two speed transmission
@rafaeltamayo80992 жыл бұрын
Hi , Can you recommend me one of these 5 best engines with high torque for my HG p801 please help , thanks
@TheFoxalot2 жыл бұрын
Excellent review as usual. Thank you 🙏
@Texasbroski5127 ай бұрын
Trying to decide on a copperhead 3800 slate or hobbywing fusion but the fusion is 200grams and the copperhead is 70grams plus another 197grams for the motor
@RCReviewChannel7 ай бұрын
If you don't need all that speed, the Hobbywing Fusion Pro 2300kv is our first choice
@strictlybanks8612 Жыл бұрын
What type of battery dose the ecs use I have the exact same one and also how do you wire th motor and ecs up there’s the extra wire where does it go?
@strictlybanks8612 Жыл бұрын
Nvm on the extra wire idk why I said
@half-bakedcruisers42182 жыл бұрын
I am looking to put a holmes revolver motor in my TF2, which is sensorless and brushless motor. What ESC would you recommend for this application? I need a sensorless and brushless esc correct?
@mktoysreborn7 ай бұрын
I bought a mn82 with 280 motor. Can i upgrade to any of these motors? Or no?
@jdssurf Жыл бұрын
What turn motor should I get for the trx4 sport, what’s the difference in turns
@christophersiegel87382 жыл бұрын
Im just getting into rc crawling and i have a axial wraith body but need a motor and esc what would u recommend. It has the stock trans in it
@Bigbillyrayfan Жыл бұрын
Best for water running? Thanks!
@shelbyGT402 жыл бұрын
Do you have a video that has the first two esc and motor running together??
@aiizen_pr2 жыл бұрын
Hello i bought a axial wraith it has a 540 motor do i upgrade to a 550 and if i do which one?? Im new soo thanks in advance
@ka41722 жыл бұрын
Does the AXE Fusion need any servicing to have it constantly waterproof?
@rct22 жыл бұрын
On the first motor you said brushed was not good in water? I do believe that is incorrect, the best way to bed in a brushed motor is to submerge it in water and run it really slow for ages. This helps bed in the brushes and has never seen me wrong for years. If I did not hear you right then I do apologise.
@RCReviewChannel2 жыл бұрын
Very clean, pure water is ok for brushed motors. But most creeks, puddles and mud bogs are not. This water contains dirt and sediments and can easily ruin the motor brushes and armature if run for many minutes. Brushless will run in the muddiest water no problem.
@liamjones30282 жыл бұрын
Hi i have a Mn99s crawler and was wondering if you could suggest a good motor and esc. Many thanks
@NewLifeeight Жыл бұрын
What decent priced brushed esc that will run an 8 turn motor ?
@nathanmeyer38552 жыл бұрын
What would you recommend for cross rc 6x6 military truck? Its about 1:11 scale. Brushless motor, esc, and high torque steering servo.
@RCReviewChannel2 жыл бұрын
I cannot say. The last one I tried, the EMO AT4 was very good.
@hunterd.9112 жыл бұрын
Can you please do a review on the spektrum 2300kv 2 in 1? Part no: SPMXSEM1040B
@knightmpw7 ай бұрын
My crawler is a 1/10 . Its quite heavy.. do you recommend fusion SE 1200kv for that?
@RCReviewChannel7 ай бұрын
I would recommend the 2300 KV. It has enough low and modulation and great power as well.
@silentjde2 жыл бұрын
The Fusion only comes in a 1200 and 1800, the 2300 is the spectrum version.
@RCReviewChannel2 жыл бұрын
Interesting!!! Much appreciated.
@wardesvanzyl82212 жыл бұрын
Will i be able to put a yellow jacket on my trx 6?
@surfside753 ай бұрын
Reedy Radon 20t❤
@alittleofeverything72962 жыл бұрын
I been looking for a video like this nice
@RCReviewChannel2 жыл бұрын
You’re wel
@Dowan_Gim2 жыл бұрын
Thank you.
@RCReviewChannel2 жыл бұрын
You're welcome! This is cool info indeed.
@taaraadv91442 жыл бұрын
How come you did not review the Acis and Kratos 10-pole motors frome 3BROTHERSRC? They are litterally the smoothest sensored and non sensored motors available?
@RCReviewChannel2 жыл бұрын
Always... out of stock.
@taaraadv91442 жыл бұрын
@@RCReviewChannel not their old motors. Their new 10-pole inrunners.
@Steve-ee3mq2 жыл бұрын
What the motor turns of your top five?
@ThatsQuacktastic9 ай бұрын
How do I know what kv I need? I dont understand all that.
@slick15232 жыл бұрын
Can you make a video on how to use the new traxxas led kit with the hobby wing fusion. I just bought a fusion and am not sure if there’s a way.
@RCReviewChannel2 жыл бұрын
The Traxxas led power can take and input from 4 to 14v. So all you need to do is tap the power of the plug that connects to the battery.
@paulhanson15922 жыл бұрын
@@RCReviewChannel I have this question to (don't have my LED kit yet but will soon), it's because the bronco pro led kit has wires that need to go in line with the motor leads, it gives the led system feedback on forward/brake/reverse to activate different LEDs.
@mickd81882 жыл бұрын
@@paulhanson1592 yeah unfortunately that will only work with brushed motor. Maybe someone will develop a module but it's only the brake and reverse lights that will be affected. The rest of it will work. Cheers 👍
@lowercentenary2 жыл бұрын
Can anyone help and give a recommendation? I have a tamiya quick drive (toy level) and want to change the electronics but keep the stock motor. The motor is 280 so my question is what esc receiver etc will be a good match , i dont want to fry anything? Any idea at all?
@kalaganne2 жыл бұрын
I just couldn’t focus on the explanations cause of the LCG in the back 😄