5 Dollars - Homemade Alaskan mill | Portabe Sawmill || ⬇️ +Plans ⬇️

[@caferazman6399]

Sonunda, istediğim gibi bir video. Ölçüler verilerek, gerçek manada eğitici video olmuş. Çok teşekkür ederim. Başarılar dilerim. Türkiyeden selamlar.

[@AndriiPysarenko]

Teşekkürler. Duyduğuma sevindim

[@jackcody3102]

im so stoked i found this video. thank you for taking the time and putting this together. i was looking at mills that were around the 200$$ mark, then i thought wait, why don't i just fab one up for cents on the dollar. this is very nice craftsmanship. looks way more solid then the cheep aluminum ones i have used. ill be building basically the exact same thing, only a touch bigger. thank you!

[@AndriiPysarenko]

👍🤝😎

[@fredscheerle7592]

good to see someone using an Angle grinder with safety Guard still attached it's rare to see on the tube

[@AndriiPysarenko]

100%))

[@mr._grosser]

Молодец! Среди славянских блоггеров не один не выложил похожее видео. Спасибо

[@AndriiPysarenko]

Всегда пожалуйста))

[@shawncaudill424]

Great bill now just time to upgrade the saw

[@AndriiPysarenko]

🤝😎

[@outontwos4716]

That is some pro level metal fab work, from the center punch to pilot hole to cleaning up the hole with a bigger bit I couldn't have done it better my self respect 😉

[@AndriiPysarenko]

Thank you! ))

[@jamesaregood3717]

Didn't show first cut

[@AndriiPysarenko]

100 Dollars | Homemade Portable Shainsaw sawmill | NORWOOD PortaMill - REPLICA | DIY - kzbin.info/www/bejne/rn7FqGCiZ7ydpM0

[@abengtebaran5346]

Everything is needed when we work the first cut on the log extremely correct.

[@AndriiPysarenko]

🤝😎

[@alexbosh]

First cut on the log is crucial.:))

[@kendallrobinson7523]

I just don't see how you move so fast.😮❤

[@tiasunepamri1944]

This is simple and so well made.

[@AndriiPysarenko]

Thank you! ))

[@zdzichzcan2808]

very nicely I try to build one for myself

[@claudiopiteri8621]

Belo projeto, irmão. Parabens !

[@gronk555]

the middle bar with handle should sit lower, sliding on the surface of the wood. This way you'll avoid the drop that happened at the end of ripping in the video. I see in your store, that you fixed that problem already.

[@AndriiPysarenko]

Yes, everything is correct)) This was my first job and I did not take this moment into account. Thanks)) 😎

[@АлексейЩербань-ч9р]

Просто супер, для дома то что нужно)

[@maurohernandez2751]

Realmente tengo que felicitarte, por el excelente video, soy técnico mecánico, y no veo errores; desde hoy pienso hacer mi proyecto, igual al tuyo, gracias por enseñarme y ser más capaz.

[@AndriiPysarenko]

Hola. ¡Gracias! Me da mucho gusto escuchar esto 🤝😎

[@AndriiPysarenko]

My own store on the Lavky.com marketplace lavky.com/wse-portable-sawmills

[@jcespinozaparra5313]

Hola bro saludos de chile. Pregunta podrias compartir las medidas de los fierros y cuales usas para poder fabricar uno. Gracias

[@hariantogesek]

Kerja yang bagus👍🤝

[@northwind9505]

We need to see how you started the cut. Like the first 6 inches.

[@maxim9875]

Cool, but i really required the double speed play here.. you can only watch so many holes being drilled and find it stil interesting. The finished project is awesome tho!

[@sethshuman6027]

Neat....the blade is dull...but, i think i am gonna try this!

[@AndriiPysarenko]

Thanks 🤝 Yes, she really is good!

[@edwinsantos3639]

Una total obra de arte.....👏🏼👍🏼👌🏻

[@AndriiPysarenko]

🤝😎

[@gladysguerra8131]

Pude ser soldador pero necesito afilar la motos ierra

[@JohnJohn-hh7ks]

Looks good.

[@mgbbourgeois8361]

Great job

[@AndriiPysarenko]

🤝😎

[@codewalters]

Brilliant . Very well done !

[@AndriiPysarenko]

Thanks 🤝😎

[@СадамХусейн-ь8ь]

Идея хороша но прикольно было бы с той стороны распила вставлять клин! легче бы шло

[@JohnJohn-hh7ks]

Looks good

[@anatolykazhuro6743]

Ну супер, только цепь наточить не смог.

[@AndriiPysarenko]

Цепь переточена под 10° и наточета! Пила слабая))

[@tvorchestwood]

Отличная работа!

[@carlosmerida9952]

Your vídeo is useful thank you.

[@AndriiPysarenko]

thank you. ))

[@daniellapointe5441]

Great video and very good concept. I'll make myself one; this is exactly what i need. are the plans still available?

[@AndriiPysarenko]

🤝Email me regarding plans: [e-mail]

[@benzen5le980]

Great 👍👍👍

[@reamiger1]

5 dollars + Years of Experience and lots of money in equipment and furnishings. BUT the *build is cool and loved the video* just giving Andrii a hard time on the title.

[@AndriiPysarenko]

😎🤝

[@airporttrucker8529]

Nice video. Since I'm not a welder or metalworker I'll just order one online.

[@AndriiPysarenko]

💪😎👍

[@christiantroy3034]

My thoughts exactly

[@CP-mb7ly]

Yeah this video is clickbait. Specialized metal worker tools worth $1000s here. Don't bother. I respect the work, but not the dishonesty in advertising the video. $5 my a...

[@ctyoungman]

@@CP-mb7ly what? What specialized tools? You buy a drill press for 50.00, a cheap welder for 125.00, a step bit for 10.00, you don't need a chop saw, grinder will work fine. Stop complaining. He's given you a very easy how to. But it's up to you to adapt it to your needs and skill level. You could literally build this with a hack saw and, a drill if you only had those. Solutions not problems my friend.

[@CP-mb7ly]

@@ctyoungman lol by your own post dude, that's almost $200 worth of tools. And not good ones. What planet are you in that you can find a drill press for that? Yeah, no. It's click bait.

[@muhammadrusdi320]

Di Indonesia operator chainsaw membelah kayu tanpa alat seperti ini, hanya dengan metode belah dari samping menggunakan penggaris benang yang di beri tinta hitam supaya hasil belahan presisi & lurus, walaupun kayu ukuran lebih dari 50cm tanpa alat seperti ini semuanya bisa di selesaikan

[@AndriiPysarenko]

Write in English, I can't understand what you wrote)). Or write in what language you wrote, I will translate))

[@muhammadrusdi320]

I am sorry,,, my speak english is not to good😁😁, if you want, any google traslate, You can translate my wrote with google translate,,,

[@muhammadrusdi320]

My languange is Indonesian

[@caracosa08]

Se me ocurre que para hacer el primer corte habría que atornillar una tabla buena sobre el tronco en bruto, para que sirviera de guía. Saludos.

[@AndriiPysarenko]

Oye! Sí, todo está correcto! O puedes usar una escalera de aluminio

[@ramchillarege1658]

Very nice. Would be valuable if you could post a drawing/plan..so we can replicate it.

[@AndriiPysarenko]

[e-mail]

[@gustavovillarreal351]

Creo que mejor que el que se compra a la fábrica. Pero mi imposible hacerlo. 😂

[@jupensitumorang7680]

God👍👍👍👍

[@alexsancho9638]

very good

[@AndriiPysarenko]

😎🤝

[@Marcop_Grop]

Kreatif friends saw

[@nold606]

Terbaik..👍

[@AndriiPysarenko]

Thanks

[@ratumanoasuguta1038]

Sir great job thank you. What a knowledge. What is the price?.

[@AndriiPysarenko]

Hello. Email me [e-mail]

[@davo8802]

Need a ripper chain

[@redsquirrelftw]

Just curious, how do you start the first cut with one of these? I guess you need two straight rails as well to set it against?

[@eltigredetejas2328]

I have everything here except a welding machine 🤦🏿‍♂️ it’s time to invest in one

[@santinomonti1984]

Bellissimo ...dove posso vedere il progetto dettagliato con le misure e il materiale? Grazie

[@ejsocci2630]

Totally awesome, how much would make and sell one for?

[@AndriiPysarenko]

Hi. email me [e-mail]

[@vxxvxfgx5073]

OMG😃😃😁😁👍👍

[@AndriiPysarenko]

💪😎🤝

[@rzaceylan4435]

Bir dahaki sefere ölçüleri verin ve yavaş hareket edin emeğinize sağlık teşekkür ederim selamlar

[@kostyamanchurak4988]

Друже! Ти покажи як ти першу доску знімав...

[@AndriiPysarenko]

kzbin.info/www/bejne/h2qWc5h8d8earK8

[@juliocesarlyraborges8645]

Show Manaus.

[@randyzapton6424]

Why does everyone drill dry in other words without oils?

[@daveaskin1333]

I think your saw will be happier with a ripping chain...

[@gregpeevy7783]

Hey great video and very nice work. I’m not new to using chainsaws, but new to Alaskan type mills. What actually holds the saw in the mill?

[@bryce86777]

Clamp pressure.

[@Олегкалужний-г7ч]

Чудовий варіант домашньої пилорами. Но наскільки я побачив, то ланцюг на пилі тупий. Так так я перечитав коментарі. То не пила слаба, то таки ланцюг тупий і під повздовжне розпилювання не заточений.

[@AndriiPysarenko]

Повторюсь ще один раз. 😎 Цеп було переточено під 10° та наточено. Бензопила Foresta (Дніпро М), вона слаба для цього, але все одно розпилює. До речі, електропила Зеніт, з тим самим цепом, розпилює набагато краще (є відео на каналі) 😎

[@culturaehistoriaargentina6234]

Buen trabajo !! .me podrías facilitar las medidas?? Saludos desde argentina

[@AndriiPysarenko]

Oye! Gracias! Desafortunadamente, se lo di a un amigo y no puedo medir todos los tamaños ...

[@СергейСубботкин-ш4о]

Н

[@СергейСубботкин-ш4о]

Неее

[@CarlosDiaz-qg2if]

❤

[@LittleBudd13]

Looks like $50 material and thousands in tools..

[@jhscheppele2448]

You got that figured out in record time

[@russellrose4862]

looking for plans for the saw mill

[@AndriiPysarenko]

Link in description))

[@marcocavallin3702]

good job! how long is the chainsaw bar? how many cc is your chainsaw?

[@AndriiPysarenko]

Hi. Thanks. Saw weak, 58 cc, 500 mm

[@howtozone9882]

Hi, i cannot find this sawmill on your shop anymore? Where can i Get it?

[@AndriiPysarenko]

Hello. Write to me at [e-mail]

[@loveofgod3216]

Is this ripping chain or normal cross cut

[@AndriiPysarenko]

This is a regular chain that I resharpened at 10 °

[@loveofgod3216]

Ok thanks for reply

[@loveofgod3216]

Please suggest me which is better ripping chain or regular with 10degree for milling because I have some milling work at home , if you worked with milling chain

[@AndriiPysarenko]

I resharpen a regular oregon chain

[@QwertyQwerty-kr9fv]

Как сделать первый спил ровным?

[@AndriiPysarenko]

Брус прикрутить или алюминиевую лестницу

[@ВасяВасин-д8р2с]

Забыть про такой дивайс и купить доски. Дорого обойдется доска если таким образом ее изготавливать!)))

[@yaokangba929]

Quelles les dimensions des tuyaux carrés ? Des corners ? C est vraiment génial

[@AndriiPysarenko]

[e-mail]

[@СЕРГЕЙИВАНОВ-щ2о7р]

Все хорошо, вот только при такой работе бензопила быстро выработает свой ресурс и придется покупать новую пилу. Надо посчитать сколько стоит новая пила, стоимость затраченных усилий при сборке и работе и стоимость изготовленных досок. И тогда решить, стоит оно того?

[@patriciosalas4112]

Hola , necesito una de estas

[@mekchanneng6027]

Can you made 1 for sale to Cambodia?

[@AndriiPysarenko]

Yes I can. Email me [e-mail]

[@Ritchfridoom812]

Is it possible to order one for you? Thank you for your reply.

[@AndriiPysarenko]

Hello. email me [e-mail]

[@arseniovera9535]

El video !!!! Esta todo bien . De la forma que los cortas también. Pero pero yo yo le un secreto !!! De la forma que las formas que los sierras.¡¡¡¡ no es viables !!!! Yo trabajé mucho aserrando madera . ¡¡¡ el combustible es caro ,el aceite ,aceite mezclas, Lima , cadena ,y todos el desgastes del motor es muy abismal ¡¡¡¡ no sierra los números .por tu video puedo darte un voto .saludos al canal . .

[@AndriiPysarenko]

Hola. Si necesitas cortar un poco, entonces está bien))

[@turn-n-burn1421]

I was with ya until you started welding. I don't have a welder.

[@alexandrealves2568]

Eai.cara.estão.matando.as.motor.serra.motor.serra.foi.feito.pra.bri.madeira.com.u bico.eu só.proficiona

[@ranjitdebmithu]

O saman hamko milega kia

[@jordanbeardy8798]

👍

[@fipilica]

hi, do you still have the plans for this one on lavky ? asking because the one listed there doesn't looks the same

[@AndriiPysarenko]

Email me [e-mail]

[@fipilica]

@@AndriiPysarenko Hi, sent you an email some time ago, but I think you missed it.

[@christiantroy3034]

Good job, but many of us do not have metal fab shops, as soon as you started welding you made it impossible for consider this

[@AndriiPysarenko]

🤷‍♂️😎

[@jaychilton]

What is the spray you used when welding?

[@AndriiPysarenko]

abicor binzel ceramic spray

[@carsonshipley3287]

Anti spatter but it is not needed just makes weld prettier

[@gavindvasavevasavegavind5622]

Online parchesh avelebal Yes or no Ripley plz

[@AndriiPysarenko]

Yes. [e-mail]

[@fideldiazperez9929]

Donde está de venta

[@ehv564]

Tiene las medidas que uso?

[@josecondez3546]

👍🏽

[@AndriiPysarenko]

🤝

[@Moschkito]

Na die sage ist aber Stumpf 😂

[@Markll7408]

В начале видео производительность распиловки оставляет желать лучшего. Позаботьтесь о заточке пильных цепей, друзья.

[@AndriiPysarenko]

Заточка цепи отличная, позаботился. Пила слабая!

[@persey04]

@@AndriiPysarenko я тоже слышал что всё не просто так ,надо пилу очень мощную ,цепь и шину узкую специальную и заточить цепь под 10 градусов. В общем,надо положить свою на полку и купить абсолютно новую,но на кой чёрт это делать если ты этим профессионально заниматься не будешь ,а тебе это нужно сделать здесь и сейчас в малом количестве или вообще ради эксперимента.

[@Markll7408]

В России такое собрать будет стоить 100 долларов, увы. И это очень пeчально.

[@ginaangelessuarez689]

Como lo puedo conseguir para comprar teléfonos y dirección bendiciones

[@NBkabipadra]

How to order Flipkart

[@AndriiPysarenko]

PayPal or Payoneer

[@silviodeoliveirarodrigues5448]

👍👍👍👏👏👏🙏

[@AndriiPysarenko]

Thanks

[@younasdar4183]

Absolutely great idea 💡💡 SIR GEE

[@AndriiPysarenko]

Thanks ))

[@larrymiller5171]

No way $5 you can't even get the square tubing for that...

[@AndriiPysarenko]

Dude, did you see what I made it out of? From old, rusty materials that have been in the trash for years. 😎

[@reneuriartejr5764]

Dig the video. something I could definitely make. thanks to the step by step. See a lot of negative comments due to the title... Maybe$5 to buy the bolts and other items... Me I have a phrase that I throw out on the regular basis. Can't call yourself a man if you don't take care of your kids, can't call yourself a man if you don't got tools, can't call yourself a man if you got tools and don't know how to use them. Yes it's a bit deceiving I guess... But if you're considering cutting lumber... Don't you think you should have more than a pencil and a hammer in your tool box ha ha ha ha. Buy some damn tools guys and quit the crying

[@pareshbhai7917]

Video hindi me banaye plz

[@pedroluisfuenmayorbalza7292]

no consigo los planos de este video... y bien estoy con ukrania

[@AndriiPysarenko]

Envíame un correo electrónico [e-mail]

[@kevinlogiudice5458]

Why didn’t you use the chop saw to cut both those angle iron pieces too instead of a grinder cutter? And $5.00? Nope 👎, I don’t think so man.

[@gb73275]

Чего там за полосатая тряпка на стене болтается?

[@AndriiPysarenko]

Полосатую тряпку, я только одну знаю. Триколор 😉😎😂 А то что Вы увидели, это флаг 🇺🇸 США💪🏻😎

[@gb73275]

@@AndriiPysarenko А вы каким боком к флагу США?

[@gb73275]

@@AndriiPysarenko Ну что притих, Американец? На полосатую тряпку дрочишь? Ты хоть понимаешь, рагуль, насколько ты тупо выглядишь с этим флагом, и попыткой представить свои поделки как "made in USA"?

[@AndriiPysarenko]

😂😂😂😂😂🇺🇸🇬🇧🇨🇦🇪🇺💪🏻

[@AndriiPysarenko]

🇷🇺=🐷🐶

[@hartonoaji6574]

bikin ribet tdk epektip buat belah kayu

[@salipoulosesali2761]

Send India sir

[@AndriiPysarenko]

email me [e-mail]

[@salipoulosesali2761]

​@@AndriiPysarenko how much send India

[@teole6364]

More like 500 dollars.

[@AndriiPysarenko]

Max 10$😎

[@grzegorzswierczewski1904]

Szkoda zdrowia.

[@bimalbag1479]

Dada namar dia

[@denisclay1536]

Such annoying music! So repetitive!