5” Long Stroke 14.5lb vs. 16lb spring - Cycling Difference for your Walther PDP

Рет қаралды 1,874

ZRTS

Күн бұрын

Пікірлер

@DeletedUser12345 Ай бұрын

What's the difference in the feel? It's hard to tell from the slow-mo

@zrtacticalsolutions Ай бұрын

@@DeletedUser12345 16 returns to batter quicker. Shorter impulse

@ZensivYT Ай бұрын

Nice product hope you guys make them for other firearms.

@zrtacticalsolutions Ай бұрын

@@ZensivYT most guns are designed with the correct recoil system length so it’s not possible. Only possible on a PDP because Walther was lazy and used the same guide rod in every gun since the P99

@ZensivYT Ай бұрын

@ ah I get it, maybe that’s why I always thought the pdp’s were snappy feeling compared to other full size pistols?

@daftputz Ай бұрын

Is the 16lb spring still significantly softer than the stock spring setup?

@stanthebamafan Ай бұрын

Can the 16 pound spring go in the long stroke made for the 4.5 guns? And will it help the slide bang into the ejector less? My ejector has a nice dent in it, although it hasn’t affected the function.

@VariaVante Ай бұрын

It looks like the 16lb has a quicker return to battery. Which one is softer though?

@28_babyshark Ай бұрын

I was looking at the same thing. The 16lb does return the slide to battery quicker and also causes a little bit more of a nose dive when the slide returns.

@freeguap8609 Ай бұрын

reliability wise the 16 lb should be better right? and 14.5 lb is going to be softer feeling?

@zrtacticalsolutions Ай бұрын

@@freeguap8609 yes, especially for hotter ammo

@freeguap8609 Ай бұрын

@@zrtacticalsolutions on a steel frame pdp would the long stroke guide rod cause more wear on the firearm vs a captured guide rod?

@onpsxmember Ай бұрын

You have longer way back by removing the spacer, then it feels like waiting for it to cycle. Now with a heavier spring it closes quicker but it will also slam shut creating more strain on the lock up and it dips down.