5 - Minute Metal Stamping Tutorial for Beginners, How to Stamp on Metal - Beaducation.com

To find a list of the tools and materials needed for this tutorial visit -- www.beaducatio...
Wanna learn more? We have hundreds of free videos on our site -- beaducation.co...
Stamped metal jewelry is not only fun and easy, it's all the rage right now! In this quick 5-minute tutorial video, Lisa introduces you to the basic tools and techniques to make your own personalized jewelry. Wanna delve even deeper into this technique? Check out Lisa's more extensive class, Stamping on Metal.
Coil, bend, wind and boss that wire into amazing bangle bracelets. Craft these artful whirlwinds of light and texture using Lisa Niven Kelly's sculptural wire techniques. Discuss antiquing and design options then finish with a spiral hook and eye clasp.
#metalstamping #diyjewelry #jewelrymaking Come join our Facebook Group - / metalstampingandbeyond

[@Mofflin1]

As someone who just munted an industrial data plate in my workshop, this tutorial has shown me where I went wrong, so thank you.

[@tarahatzelman6708]

I've been messing this up for several days, thank you for making the most simple and we'll explained video I've been searching for 😭❤️

[@hlegler]

I'm a minute 28 in and already I've learned wayyyy more about letter stamping that I expected to learn. THANK YOU!!!! This is a super helpful tutorial! (OK, I need to watch the rest...) :)

[@beaducation]

Glad it was helpful!

[@pamfausz6500]

I have followed you for years and also purchased items. You have great tutorials. Thanks for sharing.....

[@peterzenner2020]

I had problems spacing letters--and see that you marked them on the tape. Duh?!? The simple things you explain that I never thought of! Thanks.

[@coykar]

Nice and simple tutorial. I love it! Thank you!

[@lezleeliljenberg963]

This was very helpful to show me how to get the color into the stamp! Thanks

[@michaelcowgill]

thank you so much! great video! quick and to the point!

[@lexxiiwaiter2597]

This video is life! Love your videos ❤ Great tutorial for beginners. Thank you for sharing!!

[@Mongolia2468]

never thought its such easy. ahh rllyy wanna try it!!

[@ToriLynnH]

Thank you

[@beaducation]

😊

[@bevlindsay7054]

Thanks so much for this, just what I wanted to learn how to do. 💕

[@along58]

Yup. Definitely trying this!!

[@natmcpick9780]

Thank you I’m going to make one

[@jackieheath9120]

Thank you explain so well

[@bethbosheers8096]

This is so great! Thank you for teaching us.😎👍🏼❤️

[@GermanZimmerer]

Thank You for this detailed & great tip video!

[@Linda_68]

May I ask what size your letters you used?

[@suzzetteallam6695]

THANK YOU

[@somarvelis]

Can you do a video on how you store all your stamps

[@beaducation]

great idea! I will add it to the list

[@jennysurtees8272]

Thank you soo much for this!

[@beaducation]

You are welcome Jenny! Thanks for watching!

[@delilah9974]

OMG this is so cool

[@hotlittlezombiekiller2729]

It looks a little bent inward. Any advice on how to make it look straight?

[@beaducation]

The metal is going to distrort a bit naturally since you are hitting it with steel. You can flatten the piece with a plastic mallet. You can also use thicker metal. This is a quick tutorial on the basics but for more, check out our catalogue of metal stamping video classes. Links below! www.beaducation.com/online_classes/20-stamping-on-metal?cat=11 www.beaducation.com/class_categories/11-metal-stamping

[@ruthgunneson-poling1571]

Great video! Easy to understand with soft soothing music in the background. In case I missed it where do I get these supplies?

[@beaducation]

beaducation.com

[@somarvelis]

Where is a good place to buy design stamps

[@beaducation]

beaducation.com/collections/metal-design-stamps is the very best (in our humble opinion ☺)

[@colebrown1554]

How would I make this flat so that it is no longer bent? (indented)

[@beaducation]

If the blanks starts to curve you can flip it over and use a plastic mallet to flatten it. beaducation.com/products/plastic-mallet

[@stinetastic123]

Hi! I am having trouble with the stamping leaving scratches on the back of my piece each time. I am using rose gold bars and metal block. If I hit it once it doesn't imprint enough so I have to hit it twice but not super hard. I am also using 1.5mm letters on this small bar. Are there any ways to avoid the back of your project turning into a mess?

[@beaducation]

Hi! Sorry to hear you're having a hard time. There are a few options. 1: You can use a thicker bar. This will put more metal between the stamped impression on the front, and the back. 2: Use a highly polished bench block. This way the imperfections from the block won't damage the back of your bar. 3: Stamp lighter. This may not give you the look you want, but would prevent the back from having the "shadow" from the front stamping. 4: Polish the back of the bar once you're done stamping. We have a class called Polishing with Power Tools that would be helpful for this. I hope this helps! Happy stamping!

[@motives88]

Is there a way to flatten it back out?

[@beaducation]

Hi Daria! If your metal has some warping from the stamping you can use a plastic mallet, raw hide, or rubber mallet to flatten it back out. These mallets can be found on our website, www.beaducation.com. Have a great day!

[@michellecastro6080]

Is there a way to create raised letters? Is the back raised?

[@beaducation]

Sorry, no there isn’t. Not with this type of stamping.

[@sherylnapier6020]

What hammer are you using please. I want to order on amazon but there seems to be a lot of disappointment about what is offered. Thanks from Maine

[@beaducation]

You can use anyone of these hammers for stamping. We sell the 1lb and 2lb brass hammers. 2lb is great for larger fonts and more detailed design stamps. www.beaducation.com/ad_hoc?list=HAM001,HAM002,HAM025,HAM021

[@tatyanaevetskaya1910]

I have my first set now. But need help) maybe the hammer is too light or the absense of steel basement.. but if i make a strike - there is almost nothing on a brass tag. What do i do wrong?)) I’m so upset;( Thank you in advance!!!

[@beaducation]

We recommend using a hammer that is at least 16 oz (1lb) in the head of the hammer. Make sure not to have any padding under your metal bench block. For more tips on metal stamping check out the stamping on metal class. www.beaducation.com/online_classes/20-stamping-on-metal

[@barbra429]

If this is aluminum, is it suitable to sell to customers or is aluminum low quality?

[@beaducation]

it's very suitable to sell. We have tons of customers making and selling jewelry from aluminum. Certainly there are higher quality metals but aluminum is a very affordable option.

[@barbra429]

@@beaducation Thank you.

[@barbra429]

@@beaducation Do you sell tumblers?

[@Shelby-xz4qk]

what letter size did you use, also the blank does not look flat after stamping, but rather inverted? how do you keep that from happening?

[@beaducation]

This is just a quick tutorial, but if you would like to learn more about stamping follow the link below. www.beaducation.com/online_classes/20-stamping-on-metal?cat=11

[@Mkp20000]

You are bending metal. It deforms. Flatten it out afterwards. My god people, your inane questions! If you can’t figure out these basics, I don’t think you should be trying this. It’s pretty basic.

[@kcarrill86]

Mkp20000 calm down

[@FeistyFelineYT]

Hi Beaducation. Your videos are very helpful and easy to understand. I was wondering, how can I make metal stamped cufflinks?

[@beaducation]

Hello! This would be a great gift! We haven't made stamped cufflinks, but here's an idea. Find cufflinks with a flat disc, then stamp a blank and adhere the blank to the flat disc with E6000 glue. Hope this helps!

[@gideonbicksler3219]

Does anyone know what kind of blank is shown in the very opening with the birds and triangles? I like the beat up look around the edges. Does it come that way or are those added?

[@beaducation]

Those are actual metal design stamps! We carry them on our site. The birds are called "Love Birds" and you can find them here: www.beaducation.com/pc/98-metal-stamping-tools-metal-design-stamps?utf8=%E2%9C%93&qry=&choices%5B93%5D=on&sort_order=Newest We also carry the triangle stamp. You can look at our shapes here: beaducation.com/pc/98-metal-stamping-tools-metal-design-stamps?utf8=%E2%9C%93&qry=&choices%5B96%5D=on&sort_order=Newest

[@biloparisien9903]

Hi Can u tell what s the name of pen ink that u use for color please ? 😊

[@beaducation]

That was a Sharpie brand marker. We like the "Industrial Strength" best. beaducation.com/products/industrial-sharpie-marker?variant=37711620636829

[@barbra429]

Anyone know what metal is being used in this demo?

[@beaducation]

Aluminum 👍 beaducation.com/collections/metal-stamping-blanks/material_aluminum

[@youniverse_astrotarot]

What does she call these 0:43?

[@beaducation]

Hi! The metal materials for stamping on are called "blanks". Here is a link to a variety of shape and metal options. beaducation.com/collections/metal-stamping-blanks

[@michellemcclarence428]

Hello just to ask which stamps would you say are better to use Impressart or Beadsmith??? i am torn on which ones to get swaying more Beadsmith as a little cheaper but dont want less quality..... HELP!!

[@beaducation]

ImpressArt for sure.

[@kimmcconnell2155]

What size stamp is this your using

[@beaducation]

It looks like we used 1/8" (3.2mm) letters.

[@marelinmendoza5970]

Loved your video it helped out a lot. I do have a question for you. I’m new to all of it and I’m trying to learn as much. When I do my stamping I’ve noticed that it shows like a lighter shade on the back what can I do to fix it.

[@beaducation]

It's kind of just part of stamping. You are manipulating the metal so you might see some of the impression through to the other side. Some things to consider. 1. Are you stamping too hard? 2. How thick is your metal? You might consider stamping on thicker metal. 3. Check out this video! It's mainly about double sided stamping BUT it's a good reminder that sometimes both side of the metal need some finishing attention :) www.beaducation.com/online_classes/199-stamping-on-both-sides-of-metal-blanks-quick-vid?cat=19

[@coriOcean]

may I ask, what's the best gauge and mm thickness for jumprings to hold circle blank pendants between 6-13mm ? I want something that I can rely on, and I've been using 0.7 and 1mm thick but unsure what's best. Does the hardness of the metal also plays a role I imagine? I wouldn't want it to be so hard that I make my life harder either haha, thanks!

[@beaducation]

here is a great guide to help visualize what size jump ring you may want for different size pendants. beaducation.com/pages/choosing-the-right-jump-ring-for-your-project And here is a youtube tutorial that discusses different types of jump rings, strengths, which to use, and HOW to properly close a jump ring. kzbin.info/www/bejne/l5TYknl_gLZ5jdksi=qMXu2GT2-nd1LDgS

[@meganjohnston2013]

Hi, I am new to stamping. I no matter how hard I hit the stamp with the hammer, there isn't a letter left on the metal. Is this because I am using a rubber block underneath instead of metal?

[@beaducation]

HI Megan! Welcome to the wonderful world of stamping! Yes, you need a bench block under your metal to give resistance. This will allow a good impression to be created. Have fun!

[@ayeshajabeen543]

Can i order this? as these tool are unavailable in my country! I want a two keyrings both saying " No matter where, BFF and with some distance A should have written!

[@beaducation]

Hello Ayesha. We sell all the tools and materials used to make the samples show in this video. We do not sell finished product. But you can check us out at beaducation.com. We ship to many countries!

[@gabbz5]

Hello, I got a question, Do I really need a metal stamping hammer, or can I just a regular one? Ive been using one that I had in my house and I don't know if it because is my first time working with this technique that I'm not having good results, or it is because I'm not using the proper hammer.

[@beaducation]

If you are using a household hammer for stamping, make sure the head weight a minimum of 16 oz. If you are not getting good enough impressions, check the weight of your hammer, make sure you are working on a sturdy work table, bench block does not have padding underneath. You don't have to use a brass mallet, but it does work great!

[@MrLogan180]

Hello! I have this idea of buying some friendship necklace for my friend group but one of my friends name starts with a non english letter and I would have to add something. I don't have the supplies for metal stamping. I drug store jewellery ok to do metal stamping and can I use any kind of thing (like a tiny screwdriver) to stamp it on. I only need 2 little lines.

[@beaducation]

We carry a great starter kit. We recommend using only stamping tools like the ones shown in this tutorial:)

[@Wioleth]

Hello, I want to buy these circles. What size are you using in the video? Thank you :)

[@beaducation]

+Wioleth Hello! Lisa uses a 3/4" sterling silver circle blank. You can find our selection of blanks here: www.beaducation.com/product_categories/96-sterling-silver-circles-cogs Have a great day!

[@Zisa001]

Can I use the hole punch for alpaca (new silver)? And I notice that your item is not flat anymore....

[@beaducation]

the hold punch will work on most metals as long as they are 20g or thinner and not too hard. Yes, when stamping, sometimes it distorts the metal. If that happens, just hammer if back flat with a rawhide or plastic mallet.

[@BATHzombie]

can you stamp 8mm silver square bead with this ?

[@beaducation]

Hi Anas, As long as the bead in solid, and not hollow you should be good to go!

[@katynorton5588]

So my hammer must not be heavy enough because I have to hit it like 20 times and sometimes it's still not enough...I have a short hammer with a metal top piece...I would like to be able to stamp with 1-2 strikes. What do you recommend?

[@beaducation]

You might try a 16oz (1lb) hammer or even a 2lb one. It makes a world of difference. Also, make sure you are stamping on a bench block and using metal soft enough to take the impression. Hope this helps! Sorry for the late reply!

[@katynorton5588]

Beaducation it was the metal! ...maybe the stamps too. I got different blanks and a better set of stamps and now it only takes me one strike! Made a world of difference. Thanks for your response ☺

[@zinemekni5409]

Hi, is it possible to stamp on stainless tag 2mm thickness ??

[@beaducation]

Yes you can! But you need to make sure your letter set is rated for stamping on stainless steel, otherwise you can ruin your stamps. beaducation.com/collections/letter-and-number-stamp-sets/material_rated-to-stamp-on-stainless-steel

[@ndiforbendrine735]

Wow i really love this. Pls how can i get these tools?

[@beaducation]

You can purchase stamping tools and supplies at www.beaducation.com!

[@claristabouwmeester9359]

What is the size of the font stamp?

[@beaducation]

It was an uppercase between 2mm and 3mm - fairly standard sizes. Here is a great chart to help visualize what different size fonts in upper and lowercase will look like on a variety of circle sizes. beaducation.com/pages/how-many-letters-can-i-fit-in-a-certain-measurement

[@mizstinkie]

Where did you get the thick block of metal thats under your project

[@beaducation]

Hi Amirah! You can find a selection of bench blocks on our website. Here's a link to what we offer: www.beaducation.com/home/search?qry=bench+block Have a great day!

[@emilyricketson1190]

What Metal stamp company do u recommend

[@beaducation]

www.beaducation.com

[@tilted3564]

Is a weighted hammer absolutely necessary? I've been trying a regular hammer and Im not sure if its the lack of steel block or hammer weight! please help ! xoxo

[@beaducation]

Yes it is, for the best stamping results. We recommend using at least a 1 lb hammer. And you need a metal stamping surface (steel block). www.beaducation.com/p/342-jewelry-making-tools-1-lb-brass-head-mallet-hammer www.beaducation.com/p/20-jewelry-making-tools-steel-bench-block-2-5-x-2-5

[@tatyanaevetskaya1910]

I have the same problem)) Have you already solved yours?) Share with me the experience please!

[@booksgoneby1773]

Little late to the party, but can I use a normal hammer from a toolbox as well?

[@beaducation]

You can use a household hammer. Just make sure it is a minimum of 16oz (head of the hammer)

[@aimee1983]

Hello, i'm thinking about to start a stamping "business" can you tell me about the tools??? how many mm of letters I need to buy and where can I find a good quality one.

[@beaducation]

Hi Aimee! Welcome to the fun world of stamping! We have a page on our website that breaks down all the tools you'll need. I think you'll find it very helpful. Here's a link to it: www.beaducation.com/stamping

[@xxevexx3445]

Would the sharpie, inside the letters, come of when the necklace gets wet?

[@beaducation]

Yes over time

[@xxevexx3445]

Thank you so much for replying to me!!

[@jamaicajacobson5678]

I'm new to metal stamping and have just recently used a 6mm stamp on a copper cuff blank. I tried to fill it in stamp enamel the same way that I would for the 3mm metal stamps that I have but it doesn't really work that well. Have you ever used a 6mm letter stamp and if so, is this a common problem for you? I've tried to research this answer on Google but with no avail. Thanks for any suggestions you can offer.

[@beaducation]

It should work just the same. Sounds like maybe you aren't getting the 6mm letter deep enough. Try using the tilt and tap method or striking the stamp harder. www.beaducation.com/product_guides/6-tilt-n-tap-method-working-with-design-stamps

[@jamaicajacobson5678]

Thanks for answering my question. I'll give it a try and hope that it works out.

[@Mkp20000]

Use a paint stick. Look it up on Amazon.

[@forbearingmotorhead]

Hello. Thanks for the awesome tutorial. Can the same be done on colored metal sheets?

[@beaducation]

Hi Sandip. We also like working with anodized aluminum which comes in a variety of colors. www.beaducation.com/pc/258-wire-sheet-metal?utf8=%E2%9C%93&qry=&choices%5B244%5D=on&sort_order=Model+%28A-Z%29

[@nancyhenry7074]

Great tutorial - I want to punch a hole through a penny, what would be the best hole plier to buy? And using the metal stamping tools you recommend, would these work on a penny?

[@beaducation]

For something that thick we would say using a drill or drill press might be best. You can ruin the hold punch pliers. You may also try a the power punch plier. www.beaducation.com/p/1686-jewelry-making-tools-power-punch-plier

[@Gilliebeany]

Just use a drill with a bit for metal

[@vancomeros4140]

Hi can you tell me what is the of the metal disc and the stamp?

[@beaducation]

In this class we used sterling silver. You can use any soft metal for stamping. We carry a variety of metals. www.beaducation.com/pc/188-metal-stamping-blanks

[@vancomeros4140]

@@beaducation I mean, the size of the stamp and the metal blank?

[@rachelking1068]

Hi there! What kind of hammer are you using here? Also, does the sharpie seem to stay put after wearing for a long time? Thank you so much for your help and thank you for sharing the knowledge! -Rachel

[@beaducation]

+Rachel King Hello Rachel! Lisa is using a 1lb. brass mallet in this video. The marker is for marking, measuring, or adding temporary black in the impressions of stamped metal jewelry. You may find our Stamping page on our website fun, you can find it here: www.beaducation.com/stamping Have a great day!

[@ummsalamah7711]

Hello sister. Where can I buy this kind of tools to make such great jewelry pieces as yours? I have a limited income so the cheaper the better.

[@beaducation]

You can find everything we at www.beaducation.com

[@maevewolff8919]

Do you need that type of hammer or can you use any hammer?

[@beaducation]

We highly recommend a 1 lbs. brass mallet. As mentioned in the class it offers a soft but dense hammer face that will allow better impressions. If you use another type of hammer, just make sure it 1 lb. or heavier. Have fun!

[@claireb8342]

Where can I get high quality of blanks?

[@beaducation]

visit our site! www.beaducation.com/ www.beaducation.com/pc/188-metal-stamping-blanks

[@littlepaperscollection5515]

How much did you spend on all the tools and tags? I want to start to sell these online... 🤔 it looks very rustic!

[@beaducation]

We carry all the stamping supplies at www.beaducation.com. Check out our metal stamping page. Link below! www.beaducation.com/how-to-stamp-on-metal

[@ksoo1299]

What pen you use ? ❤

[@beaducation]

I use an industrial sharpie or the ImpressArt enamel pen beaducation.com/collections/other-metal-stamping-tools/products/impressart-stamp-enamel-marker-black

[@juliabananas4931]

You really can't hit it twice because you end up with two of the same letter. DONT HIT IT TWICE!!!! I've done it before and it ruined my piece!!

[@zubaidawaheda7165]

what is the gauge of the stamping circle?

[@beaducation]

There are a variety of gauges to choose from. 22 gauge is pretty popular (and thicker depending on your project).

[@edenjhaillagordo]

Hello what is the size of your metal punch?

[@beaducation]

We used the 1.5mm hole punch, but it also comes in other sizes. www.beaducation.com/p/3251-jewelry-making-tools-metal-hole-punch-plier-1-5mm-hole

[@mariangies]

Great video thanks. Where can I find the stamps and block? what size is the heart?

[@beaducation]

There is a link in the description to our site - www.beaducation.com/online_classes/183-5-minute-metal-stamping-tutorial We also have a webpage devoted to beginning stampers, hope it helps :) www.beaducation.com/stamping

[@bigglizz2]

Maris Rio

[@kailivlogs7934]

where do you purchase the discs??

[@beaducation]

www.beaducation.com

[@bayborn510]

Is there a way to fuse the metal chain?

[@beaducation]

Do you mean soldering the links at the end with a claps? We have a great tutorial on soldering jump rings. You can solder the jump ring closed on a stamped pendant or to attach the clasp. www.beaducation.com/online_classes/135-soldering-jump-rings

[@Thirtyfivepercentferal]

How do you not make it look so crappy? I mean, it looks all dented and dingged up.. how do you prevent that so it actually looks half decent?

[@beaducation]

The metal is being manipulated so there is no real way to prevent indents in the metal. However, hitting the metal too hard can make it worse, you can use thicker metal and also it requires some finishing techniques like sanding or polishing. www.beaducation.com/online_classes/204-3-best-ways-to-polish-metal-blanks-facebook-live-episode-5?cat=4 www.beaducation.com/online_classes/159-polishing-with-power-tools?cat=4

[@Mkp20000]

Can’t any of you figure out how to do anything?

[@anazays66]

Where to get this metal stamping?

[@beaducation]

www.beaducation.com

[@beecee7773]

What size stamps are you using?

[@beaducation]

Hi Bee! Lisa is using the Economy Block Uppercase Letter and Number Stamp Set 1/8" (3.2mm). Here's a link to purchase them on our website: www.beaducation.com/p/297-metal-stamping-tools-economy-block-uppercase-letter-number-stamp-set-1-8-3-2mm Have a great day!

[@marianeth]

what is the circle made of?

[@beaducation]

+marianeth That circle is Sterling Silver.

[@clivemarshall7503]

Is there an old English font please?

[@beaducation]

Here is a link to the ones that are closest to the look of an Old English font. www.beaducation.com/pc/36-metal-stamping-tools-letter-and-number-stamp-sets?utf8=%E2%9C%93&qry=&choices%5B78%5D=on&choices%5B80%5D=on&sort_order=Newest

[@Jam_17615]

What's the size of the font?

[@beaducation]

Those are 3mm letters. You can use the filters on the side of this page to sort by size. beaducation.com/pc/36-metal-stamping-tools-letter-and-number-stamp-sets

[@uponthemaze4403]

Where can I buy some pets tags to stamp ?

[@beaducation]

www.beaducation.com/pc/188-metal-stamping-blanks

[@bkkorner]

I want to do this but it's too noisy ..

[@beaducation]

it really really helps to use a sandbag under the bench block beaducation.com/a/search?type=product&q=sandbag

[@mrutherford041204]

Do you know of any inexpensive shops to purchase supplies?

[@beaducation]

beaducation.com :)

[@madmartigan6693]

What size where the letters used here?

[@beaducation]

Looks like a 3/32" (2.4mm) - 1/8" (3.2mm)