$500 Junkyard Supercar: Making Custom Doors! (Part 1) -- Project Jigsaw Ep. 61

Рет қаралды 30,167

Күн бұрын

Пікірлер: 81

@CrucibleCoachworks Ай бұрын

Thanks to Factor75 for sponsoring today's video. Use our link to get 50% off and free shipping on your first Factor box! strms.net/factor75_crucible_coachworks

@kid_rajah Ай бұрын

I think some more tubing needs to be added to strengthen the roll bar and define the B pillar a bit more. The window looks too high up and it worries me that there is no reinforced strength for the window. Not like a frame or anything but the inner door frame should transfer strength to and from each other. I am sure you will have enough room for the scissor window mechanism when open.

@robertoortiz1879 Ай бұрын

The level of chillness on this episode did not go unnoticed. Props!

@MrDavidrosenberger Ай бұрын

Good balance - sometimes goofy, sometimes all business. Something for everyone!

@GooseGosselin Ай бұрын

Great progress! Tony really nailed the wire frame design for the doors and Ryans panel work is just bringing this car to life. That is definitely one sexy rear end Ryan.

@LoneRevD Ай бұрын

Looking amazing. You know I'm so glad to see you taking the time this project needs and not the 'OMG ITS TIME FOR SEMA, WE NEED TO HURRY OR LOSE THE SHOP' mentality. Loving how the door will flow into the sail panel. Good work as always.

@alman-world Ай бұрын

Ryan - I love the front fenders being so strong. And its you car, and Tony, so do what you want :-)

@kurtkurtis2982 Ай бұрын

As a body man and painter for the last 20yrs, ive learned people have no idea what it takes to do this work. Your wotk is amazing 👍

@BonBeinCrisse Ай бұрын

it is in fact amazing wotk they do tbh

@robertmaynard8619 Ай бұрын

The passenger side rear quarter is looking great - the clamshell is going to be a thing of beauty. 😍

@WilliamAlexanderMilne Ай бұрын

One of the best builds out there! Realistic time frames, issues and resolutions, with an eye for beauty too.

@hlpike Ай бұрын

I can't wait for the finished product, but at the same time, I love the process..

@bogdanisari4365 Ай бұрын

The lines are gorgeous, especially the transition from the fender into the door

@DachiKon Ай бұрын

best youtube series I watched. I'm always exited for Saturday because of this

@-MacCat- Ай бұрын

This is just getting better and better. Thanks guys.

@renebl2011 Ай бұрын

Hey guys, thanks for entertaining with this epic project. I like your design very much, even though looking at it from the front, it reminds me a little of a Porsche 996

@EternalGamingNet 28 күн бұрын

Great metal work, and the doors are going to look great.

@ExplizitDuester Ай бұрын

wow, you come along great, its really getting into shape! cant wait for next week

@SuperLuckyCat7 Ай бұрын

A Superleggera for the 2020:s! What a Beauty❣And so much to learn from. Way to go 🏁

@papajay161 Ай бұрын

Holys**t! Jigsaw's a car? Wow! Absolutely beautiful, Guys. Y'all are doing that.

@7pathsofpain625 Ай бұрын

You guys should use the morimoto Ferrari taillights that are fairly new. I’m seeing guys use them on the older 355s, 360s and they give you that cool restomod with new edge technology. Kinda like Gunther works style.

@brett8090 Ай бұрын

That last piece really tied the room together. That's a nice shape.

@DuncanMunro-t7c Ай бұрын

I see what you did there Mr Lebowski.

@TECsta76 Ай бұрын

19:59 on the subject of the front vender, reckon the amount of head room between the front wheel and top of the inner arch is a guider to where we wants to gets!

@Toypra Ай бұрын

watching cartoons after work hits different

@PianoScottDeBoer Ай бұрын

That might have been the best ad read I've ever seen in a KZbin video.

@SideshowBen206 Ай бұрын

Coming along swimmingly 👍

@sethb1973 Ай бұрын

Y’all get to do my dream job everyday! Awesome work and cannot wait to see the end result.!

@A2zlightwheels Ай бұрын

Seriously fellas the amount of thought yall are putting into it shows. The first shot of the hips, was mesmerizing. Everything is flowing so nicely. Cant wait to see the door skins but i can already see the vision with the wire frame. Tons of good angles on this thing though.

@Jevans3141 Ай бұрын

Deep Thoughts with Ryan - "If I don't Try, then I won't Do. And, If I don't Do, then I won't keep growing. And..... there's probably more insight past that but I think I'd rather just hit this with a hammer."

@andrevokey4132 Ай бұрын

I love this build, super inspiring ❤️

@280Zombie Ай бұрын

I do love a good sail panel 👌

@williamaguiar14 Ай бұрын

The corner is coming together nicely

@bentandre5524 Ай бұрын

i am looking forward to every saturday

@Bart_The_Man Ай бұрын

The top of the floating section is giving me Carrera GT/918 vibes and I really like it

@owensparks5013 Ай бұрын

The metal shear spiral offcuts might make a nice mustache for a machine with googly eyes.

@androz8362 Ай бұрын

Amazing job can't stop watching your content. Will you be making molds to immortalise your design as it looks incredible.

@evgeni2306 Ай бұрын

Looking very good.

@toddolius9492 Ай бұрын

To be very honest I lost faith in this project a few months ago but I guess I judged far too early, it’s looking very good! Great progress.

@RalphIvanDelaTonga Ай бұрын

Looks clean

@martin190865 Ай бұрын

been watching this from the start and im really excited for the build update every week, but i must say the headlights are a massive trigger for me, just dont look like they fit the plan of a 60s based sports car. keep up the great work guys

@shaunh227 Ай бұрын

Starting to really take form now - looks great. I’d be terrified I did all this and the end result had proportions I didn’t like. Colour selection is going to be a big deal! 😅

@viktorjohansson86 Ай бұрын

Just wow!!!

@SPEEDFREAK6988 Ай бұрын

Dampen the flat face of the carboard using a spray bottle and water,it wont take much to soften the cardboard and it would lay down closer to what its laid on.

@robertboyer5498 Ай бұрын

Just two guys making skin flicks. Seriously though, it’s looking really great. Can’t wait to see the finished car.

@RA-uj3nm Ай бұрын

Amazing 👍👍

@rudyyarbrough5122 Ай бұрын

This was by far the most informative and interesting video yet. You eliminated the childish jokes and silly acts of the past. What you are building is a great car and it deserves to be treated as such. Keep up the good work and creative ideas along with showing us how you do things instead of socking rubber clowns!

@TNTsquid. Ай бұрын

Hey... I like the skits and bits they do. :( Can't take life too seriously!

@saint_pyre Ай бұрын

must see YT. Thanks guys.

@geneharrod5362 Ай бұрын

Jigsaw Saturday yea

@robertbedard1054 Ай бұрын

Have you guys looked at these 3-D metal shaping machines? Like a 3-D printer only it shapes metal I saw an ad for when the other day is absolutely genius. I believe they were doing steel, but I think it would work on aluminum just as well. it was kinda take a lot of programming and stuff but it’d be interesting. If you guys could maybe find out somebody that has one or the company to bring one to you and do some work with it that would be cool. Maybe do one panel with it preview and have them sponsor the next project.

@tobihaifisch7558 Ай бұрын

7:31 This hip ain't gonna be square... 😉

@MrTaz0079 Ай бұрын

falcon-wing door would look great

@colgateam Ай бұрын

Great week of progress! Also what’s the track at 15:30?

@mrm7525 Ай бұрын

Bumpers for the 928 making their debut?? 👀

@roadstermatt Ай бұрын

loving how this car is shaping up is it me, or is there a wiff of porsche 904 about it ? this isn't a criticism. 904 is a very pretty car

@chrishaug Ай бұрын

Did you say exstretch? 😂

@pureaggressionmotorsports Ай бұрын

My question is when the car gets finalized who is the car actually gonna belong to?

@bigmonstermandd Ай бұрын

Matt Armstrong could do with some of your spare parts... Any GT4 RS just lying around?

@vorpalthefox Ай бұрын

8:56 wait spongebob! we're not cavemen. we have technology!

@peterouellette3874 Ай бұрын

A little here a little there

@bradkrause3070 Ай бұрын

I was waiting for a song by Shakira to come on during this episode 😜

@stephengent9974 Ай бұрын

I would have thought that it would be a good idea to keep, at lest temporarily, the interfaces of the original door, and build out from that. The first ordershyould be to make sure the door closes, and go from there. Trying to build the door to the car is very difficult.

@RichardLangis Ай бұрын

And my axe!

@christophershafer5615 Ай бұрын

Keep talking about the skin coming off for the Jigsaw project. O.o

@JoseGarcia-lq2kg Ай бұрын

Wait. Different colored eeyes?

@TSRGarage Ай бұрын

Wow 👌 looks amazing. Channel reported for sheet-metal pornography😮.

@cornerstonebarbershop6220 Ай бұрын

id probably marry Ryan I think.

@drakeorion94 Ай бұрын

Alume an um

@nickp3173 Ай бұрын

I wish you released videos more frequently or at least make videos longer. 20 minutes with a long intro and sponsor bits leaves around only 15 minutes of content. We need moreeee! Lol

@giuseppeprovenzano4498 Ай бұрын

this project is really a nice project, shame about the rear of the car which completely ruins the look of the car because it is too pointed, in comparison to the ford gt and the lamborghini miura which have very powerful and wide and placed rears... this is pointed and non-existent because they are practically the rear lights that give the car a rear..

@mgibbs468 Ай бұрын

It’s so slow and boring. I want to see the end result. I don’t need to see the shrinking and stretching of aluminum all the time. Maybe put two in one work faster lol.

@3ducs Ай бұрын

There are a lot of distracting jump edits in this video, seems like more than in the past. Us older people, whose minds have not been altered by video games, might find it difficult to watch, at least that's the way it is for me, I had to stop watching your otherwise excellent video.