#54: Wolverine Cowl Part 1 - Cardboard (free PDF) | How To | Dali DIY

[@DALILOMODIY]

***** there are many ways of harden a cardboard props, you can use epoxy resin, papermache, wall filler plaster, car putty... for mask & cowl i prefer papermache, because it still has some flexibility, therefore it is easier to put on & no cracks (mask/cowl usually very tight), for helmet i will use papermache then wall filler plaster. if you want to turn it into hard plastic, use epoxy resin (toxic). but i only used papermache & plaster in my videos, try look for it :)

[@DALILOMODIY]

Viktor Árnason here dali-lomo.blogspot.com/2014/05/x-men-wolverine-cowl-diy-cardboard-with.html :)

[@viktor5569]

Thanks

[@viktor5569]

+Dali DIY luv your channel me and my dad

[@DALILOMODIY]

Viktor Árnason thanks, say hello to your dad too :)

[@carolinabrito1066]

vou dodprbyd

[@mbaezgtkd4638]

I just want to thank you because I am making this one using your template... In my case, I used eva foam and the result is great too... thank you again...

[@bevfank]

With a couple modifications this could be a great Hawkgirl mask.

[@DALILOMODIY]

yes :)

[@NerdZillaify]

I couldn't agree more, I was looking for this video just for that reason! This guys makes amazing videos!

[@armoredcharlie301]

epic as always, i really love this one. didnt know if the nose could look so perfect in cardboard

[@tomasalanis3411]

The king of cardboard you are

[@luminousfish5494]

Can you make the mask of Daredevil?

[@VizD1]

Looks great! Looks like Hawkman as well!

[@DALILOMODIY]

UltraBat yes, that too :)

[@JenMawet]

I like how you put the PDF template as well as the PDO template. I don't have Pepakura Viewer, so I need PDFs, which most people don't have. You have them though, which is really helpful.

[@saifalikhan6759]

Semt me template

[@RichardCheshire]

I made this thing out of leather using the template and used a sewing machine rather than hot gluing everything. It looks bloody awesome :)

[@DALILOMODIY]

cool, where can we see that? picture or video? :)

[@RichardCheshire]

Dali DIY s22.postimg.org/p7q4wr9hd/14770432791311313129954.jpg

[@DALILOMODIY]

wow very nice! i always interested in making leather DIY project. please share on FB if you don't mind facebook.com/DaliDIY/ :)

[@19RICHY]

That mask looks great!! I made mine with foami

[@mrvcjack93]

i dont know if i can see anything more beautiful than this mask

[@DALILOMODIY]

haha :)

[@tfpthefantasticplayers9016]

I really appreciate your work as it takes a lot of patience and hard work .if you cover it with black and yellow cloth material it will look better.

[@theZionXofficial]

You can also use this for a Batman first appearance cowl

[@tidepoolparkour6377]

i love it, i think that you should make benders helmet from futurama

[@alfiesears4950]

Cool helmet dude

[@jamilortiz1]

This has actually the potential to be an owl man (i think thats his name) cowl from watchmen... and a flash mask (or cowl) would be sick. Keep up the AWESOME work!

[@DALILOMODIY]

Jamil Ortiz yes, this template can be very useful :)

[@jamilortiz1]

Yeah i noticed... but it does make a different style of a flash cowl (in my opinion)

[@cryophile]

I'm amazed that you got everything cut out. How thick was your box? 2mm?

[@DALILOMODIY]

yes single corrugated, about 2, 3mm dali-lomo.blogspot.com/p/items.html :)

[@daisyholton6881]

fantastic mask. i loved the music!

[@daederick170]

Thanks dali you are the best !!!!!!!!!

[@diaz5292]

Whoa totally sweet Hawkman mask dude... lol

[@blacquesjacques7239]

Thanks for not putting overbearing intrusive music in your video . I hate it whenever people slam Linkin Park in your ears .

[@DALILOMODIY]

but i think Linkin Park is pretty cool :)

[@blacquesjacques7239]

Thats cool . I don't enjoy angsty music wnenever I am trying to focus , thats all .

[@amyshack8303]

I,m going to be wolverine for Halloween!

[@rene27374]

This is so awesome!! This plus the wolverine claws and best project. Can you do a rhino helmet from the amazing spiderman 2

[@songlawmthangshakum3487]

truly great....

[@AnyerDeveraux]

You are so talented. I have seen some of your videos and they are awesome. Continue like that, you're doing a good job.

[@DALILOMODIY]

thanks, but i'm not going to make big helmet as often as i used to :)

[@skytopstudio1139]

thank for free template

[@jesushungria1915]

you can do the mask of the flash?

[@thedenin]

aqui esta freekura.blogspot.pe/2017/06/flash-mask-red-pepakura-pdo.html

[@thedenin]

aqui tambien hay otro freekura.blogspot.pe/2017/06/flash-helmet-pepakura-pdo.html

[@shahanaafroz600]

@@thedenin #ঃআকে

[@Joslito19]

YOU are ROCK!! I really love ur work project with pepakura!

[@Kratosof]

I like the music for some reason

[@DanSuperTubeOficial]

tu é incrível dali1lomo !!

[@lordgordo35]

Achei fantastico seu trabalho, obrigado por compartilhar toda sua experiencia e carinho dado ao trabalho. Valeu mesmo...

[@DALILOMODIY]

lord gordo you are welcome :)

[@jinseo8536]

Awesome job!

[@MarsunAlvarez]

Ilove d ideas

[@boopie5120]

Holy Robot Unicorn Attack.

[@shayere]

Make hawk girl pleaseee

[@MrJulian1154]

That is super cool. So I don't need bevel cuts to create this mask? Just straight edges put together?

[@DALILOMODIY]

no need

[@arthbrayan5051]

irado ele mandou muito bem

[@JacobvsRex]

So much awesome....

[@DALILOMODIY]

:)

[@Guh_roomer_Gravedigger]

great job. thanks

[@meetpanchal51]

amazing

[@chloereimer-z8i]

This is awesome but I can’t seem to figure out how to print it out, do I need to buy it to print it out at the right size?

[@DORI65]

Is it better black hot glue? Great work

[@DALILOMODIY]

same

[@lostmovies4422]

Thank you!!!

[@lemeowadventures1528]

Soo cool!!! Can you please make a mask of SONIC and all sonic friends its imposible find masks of them for buy

[@savagebeast6906]

Crochet Adorer how old are you

[@BradKingsman]

Awsom

[@mertkoca3582]

nice work

[@RonNV11]

What kind of cardboard are you using? Is it the kind where there's a part, then a squiggly line, then another, or the kind used in cereal boxes?

[@DALILOMODIY]

+Ron Lembke i used single corrugated cardboard here dali-lomo.blogspot.com/p/items.html#cardboard :)

[@marcosbona8260]

where can i find the template?

[@DALILOMODIY]

my blog :)

[@marcosbona8260]

thanks man

[@hannahlestrange4436]

Love your tutorials! Can you do thors helmet?

[@yumgenius]

make magnetto please :)

[@elcreador6675]

apoyemos a omega el fuerte🌎

[@darrenpaterson6792]

subscribed to your channel awesome work and the music is growing on me :)

[@DALILOMODIY]

darren paterson thanks :)

[@fernandocecchetto]

EXELENTEEEE!!!! AMAAAAAAAAAAZINGG!!! muy bueno gracias!! idolo!!

[@DALILOMODIY]

Fernando Cecchetto thanks :)

[@lick_that_nanner_nanner_6046]

I was a little confused on the second paper you taped and I need help figuring it out please

[@carpathiandeath4620]

why is that when i print this template on A4 its smaller.. i mean the cowl is really small

[@DALILOMODIY]

because you didn't pay attention to my other videos & post dali-lomo.blogspot.com/p/head-measurements.html :)

[@carpathiandeath4620]

+Dali DIY I saw all your videos but i didn t know about this :)) thank you

[@lauraceccardi9887]

heyyy ^^ why don't you make the thor helmet too? :D it would be great!!!

[@jeffrey1000000]

thanks for this but is there any way you could show more clearly which parts fit together? I can't see as it goes by quite quickly and your hands are covering, also the parts arent numbered or otherwise distinguished. thanks

[@DALILOMODIY]

+jeffrey1000000 see blog dali-lomo.blogspot.com/2014/05/x-men-wolverine-cowl-diy-cardboard-with.html :)

[@dakenhowlett]

im trying to make this. first attempt was not bad but not a complete success had hard time witht he nose and eyes. could you give me some advice on that ?

[@colleenhenry8022]

I could understand the two little arcs for the ears, but there are two other pieces and i cannot for the life of me understand where these go. Are they for the side of the cheeks? Under the neck? Do they go on the side of the pointy ears? Help! S O S! Confused! :-(

[@DALILOMODIY]

Colleen Henry they are for behind the ears, to rise the ear to a certain angles :)

[@nooneyouknow9384]

I can nearly see thor's helm being created in a way

[@DALILOMODIY]

here kzbin.info/www/bejne/fJmWi6Nvedd2d5I

[@mayurdahiwale5907]

does this helmet still fit your head after 6 years?

[@DALILOMODIY]

yes

[@perseohernandez755]

wow !. suscribing righ now.

[@DALILOMODIY]

:)

[@christiansalazar3806]

Cool

[@akatsuki5504]

Badass

[@DanSuperTubeOficial]

wow !!! muito legal !!!

[@CristianPerez-vj5xt]

genial tu trabajo amigo pero tengo una duda... sabrás hacer o donde poder hacer la gun-blade de lionheart seria genial saber como poder hacerla... gracias y cuidate

[@DALILOMODIY]

just google :)

[@parthchhipa3737]

How To Make Bone Claws , Please Mark A Video On That Too !!

[@anabeatrizfuentes1199]

Great work! Would you happen to have any suggestions on how to modify this template for a Jim Balent Catwoman cowl?

[@DALILOMODIY]

+Anabeatriz Fuentes i think is is simple, just build the mask, cut bigger eyes hole, remove nose, add ears :)

[@ShamanKingTan-ju]

make immortal mask from 300

[@unkle73]

Hi. Great video. Can eva craft foam effectively be used with this method, instead of cardboard?

[@DALILOMODIY]

Matthew Squibbs yes, you can use foam :)

[@ronchan5498]

can I use 5mm EVA foam instead of cardboard ?

[@tylerheintzelman3863]

question Are you able to wear this like if you could how would you put it on and and how would you secure it so it wouldn't come off

[@DALILOMODIY]

+Tyler Heintzelman it is pretty tight, won't come off instagram.com/p/1zPhOsDyJR/?taken-by=dalilomo :)

[@vojtasverak7572]

GO Go

[@cesarfelix4203]

U should make dr dooms mask or star lords helmet

[@songlawmthangshakum3487]

hey a little question...how will i knw that im makin the right size....how to take measurements with respect to a head size

[@DALILOMODIY]

this is how dali-lomo.blogspot.com/p/head-measurements.html

[@themanhkhuc122]

cool

[@ShamanKingTan-ju]

changing music

[@MrDukeSilverr]

Aw AWESOME

[@ethanbilbrey9759]

DAREDEVIL!!!

[@DALILOMODIY]

:)

[@sergiojimenez4624]

very well, very quiqly all, you are magic and please change your music :).

[@elcreador6675]

sergio jimenez apoyemos a omega el fuerte🌎

[@haviainguyemhuynh2634]

Good

[@thelanclan6570]

can i use cereal box cardboard. my regular cardboard is too hard to cut

[@DALILOMODIY]

+TheLanClan yes you can :)

[@pobbrett3244]

I'd recommend checking out "the evil ted channel" particularly his foam pattern making and how he uses registration marks it would make life so much easier and speed the process up a fair bit 👍

[@DALILOMODIY]

i followed his channel since he had only 1k followers :)

[@sloandarkhorn44885]

hawk man /Thor ect.

[@lggfgjjgygyihh1998]

greenrantern

[@kesslomatic7977]

Hi! How did you make the head cast you modeled the cowl on? Is it papermache, too? Thanks for the vid!

[@kesslomatic7977]

Just found your "DIY manikin head" video too. But thanks anyway!

[@DALILOMODIY]

:)

[@dbzgeek123]

Where did you get the black hot glue

[@DALILOMODIY]

Daiso (japanese dollar/yen store) :)

[@dbzgeek123]

dali1lomo thanks i guess i have to buy it online then :)

[@pressbeeftocontinue6079]

TAKE MAH MONEY AND MAKE A VENOM MASK! :D

[@ryzenislive2046]

BRO I AM FROM INDIA & I JUST WANTED TO KNOW THE DIMENSIONS OF THE TEMPELATE. SO KINDLY PLEASE UPLOAD THE TEMPELATE WITH DIMENSIONS WRITTEN FORM .. PLEASE BRO..

[@DALILOMODIY]

too much work for me

[@adfsfg422]

كويس

[@princewithoutcrown4674]

Dali if you could can you make a tutorial for a Skyrim dragon priest mask

[@DALILOMODIY]

PrinceWithoutCrown maybe not so soon :)

[@osomix7585]

necesito los moldes ho planos ..donde los descargo

[@DALILOMODIY]

jorge salazar i assume you asking for template? here dali-lomo.blogspot.com/2014/05/x-men-wolverine-cowl-diy-cardboard-with.html :)

[@CiaoBella700]

Would it be okay to use the plaster method for this? It seems like a smoother surface than paper mache

[@DALILOMODIY]

+CiaoBella700 because i want a very tight fitted mask, so plaster might crack when i put pressure on the mask, for this project i like it to stay slightly flexible :)

[@CiaoBella700]

+Dali DIY thanks, I'm also trying to figure out the fitment. I made the whole thing but it was too small and I'm not too sure how to scan the template accordingly.

[@CiaoBella700]

+Dali DIY scale*** not scan

[@DALILOMODIY]

CiaoBella700 try this dali-lomo.blogspot.com/p/faqs.html :)

[@CiaoBella700]

+Dali DIY I think I'll try that program on Windows. Thanks!

[@MashedPotatoes14]

Could you make a video for a Flash cowl please? :)

[@duncanmcrae9549]

Why do you use black hot glue if you don't mind me asking

[@DALILOMODIY]

Duncan McRae just for fun, no different :)

[@galactikastudios6223]

Dali Lomo hey Dali I was wondering if you could make this template bigger for me ... Most of you templates don't fit me and I don't have peperkura

[@DALILOMODIY]

what is your size? :)

[@svetasyrkova1050]

Hello, what is the name of the music that plays in this video?

[@eduardorodriguez3989]

podrías enviarme las medidas de cada unos de los trazos

[@gregtygamer]

very awesome i like your work XD >congradulations

[@bversiani]

I can make this Wolverine mask with EVA foam?

[@DALILOMODIY]

yes you can :)