I created this video with the KZbin Video Editor ( / editor )
Пікірлер: 40
@AshaJacobb5 жыл бұрын
Fascinating!
@mpart_woodlathe-stuff3 жыл бұрын
Dunno what I see here, but I like it !!! Stay safe. -Mike😷 p.s. Me? I'm not a boat or canal person by any measure
@jonoepworth40563 жыл бұрын
Nice Job, for myself the galley at the stern is a much more practical and sensible idea Thumbs Up Stay Safe o7
@OurFrenchHouseRenovation3 жыл бұрын
cheers, we've just put her up for sale due to a change in circumstances ..
@cuttersgoose3 жыл бұрын
Wow, now that’s narrow...it’s like living in a hallway..
@OurFrenchHouseRenovation3 жыл бұрын
Hi they are all 6ft 10inch wide, this is so they fit into a single lock cheers
@johnoleary528 Жыл бұрын
Amazing
@tomjeffersonwasright22888 жыл бұрын
Fascinating! I was surprised by the very hard chines. Are there any made out of fiberglass?
@OurFrenchHouseRenovation8 жыл бұрын
Cheers Tom, you can find a few older Narrowboats where the top half is made from fiberglass but nowadays most are made from Steel..Thanks
@tomjeffersonwasright22888 жыл бұрын
GraphiteGray1 Designer Jim Brown once used a process for one off boats in the Pacific. The builder built an inverted 1:1 model of the hull from sand and a little cement, coated it with wax or aluminum foil, then used it as a male mold to make a hull, removing the sand when the glass hull was done. A matching top molding could also be made. I often wondered if that could be done on a one off narrowboat. Steel is probably best for bumping the stone canal walls.
@jackbarley69377 жыл бұрын
tom jackson
@billyjenkins24675 жыл бұрын
The music is well good who is the band please ?
@danielledykgraaf64835 жыл бұрын
I want one of these real bad...but...to get it from the UK here to the states i could propbobly pay someone here to build one..or at least buy the steel. Beut of a boat folks.
@kenirwin2764 жыл бұрын
What is seldom shown is the ballast. Do you line the entire bottom with bricks, or do you adjust it for even weight distribution after fitout.
@OurFrenchHouseRenovation4 жыл бұрын
Ken Irwin hi yes the ballets covers the whole of the bottom of the boat, in this case it’s blocks of concrete evenly placed over the whole boat, once fitted out you trim it as it’s called to re balance it, I bought a few bags of stone that are hidden which worked perfectly, cheers
@kenirwin2764 жыл бұрын
Is it virtually impossible to adjust the ballast because of the finished floor?
@OurFrenchHouseRenovation4 жыл бұрын
Ken Irwin no you can take the floor up, but it’s best and easier to trim the boat with weights etc
@WoodenItBeNice3 жыл бұрын
Hi Grahame, Is there anything you won't tackle as a project? Take care mate. Cheers, Huw
@OurFrenchHouseRenovation3 жыл бұрын
Anything electrical Huw! Lol cheers
@Mr91495osh5 жыл бұрын
Just build a “bed pad” for an RV and add an electric motor and rudder
@tonyeden83815 жыл бұрын
Where is it now..............why no new videos,?
@karlsmith2426 жыл бұрын
Hi looking good is it possible to send me plans to make one myself
@ilumine50895 жыл бұрын
enrtrega no Brasil?
@kenirwin2764 жыл бұрын
So, with so little extra space on the boat, where can you hide the extra ballast?
@OurFrenchHouseRenovation4 жыл бұрын
Ken Irwin it depends how your boat is fitted out, I hid mine in the storage area of the bed base and in the pump room of the bathroom..
@hmausfr4 жыл бұрын
Update?
@chessfun7 жыл бұрын
that must have cost a fortune?
@stotas28 жыл бұрын
Who is the builder
@OurFrenchHouseRenovation7 жыл бұрын
HI The builder was JD Narrow boats at Shardlow..
@thameswater25616 жыл бұрын
remember don`t fit the boat out before you put the sides on will you :)
@michaelmooney33695 жыл бұрын
is the plate at the point of the hull the thrust bearing? I would have covered the two areas beside the engine and made a built in fuel tank, looks like it would hold around 100 to 150 gallons. I would make it a hybrid the engine would be a 30 to 60Kw generator propulsion would be an electric motor. it would also have a big battery bank lithium ion.
@OurFrenchHouseRenovation5 жыл бұрын
michael mooney hi the fuel tank is at the stern below the rudder, you can buy electric engines from approx £20,000.00 to expensive at the moment... we have 3 leisure batteries (we may add more) and a starter battery,
@jean0michel4 жыл бұрын
Just miss solar panels
@jondoe78997 жыл бұрын
I'd make one that looked like a battle ship
@thameswater25616 жыл бұрын
you might need it the way this world is going... hold on to your hat.
@mozamariner44435 жыл бұрын
If you do let me know, I’ve gotta battle axe you can have
@fukkyoutube4 жыл бұрын
these thing are not boats they are barges
@OurFrenchHouseRenovation4 жыл бұрын
These are Narrow Boats, a barge is a working vessel with a small cabin at the rear for the boatman and his family, the rest of the boat would be open to carry coal, etc
@greebo78575 жыл бұрын
I HATE these photo essays that pretend to be videos. Do it properly, can't you? I'd watch, and maybe sub, if you did. I WANT to see narrowboat vids, but this is just a waste of time.