585 RSW This Martin Guitar Is IN A PINCH

Who says you can't set up a Martin guitar as well as the others? Its all Hogwash and I'm setting out to prove it in this video.
Support: / rosastringworks
Website: www.rosastring...

[@nicksablich5166]

Love the music that’s chosen for all these videos.

[@theflash1425]

Hey Jerry, You putting grooves in groove-less bridge pins reminded me of an article I read some months ago. Essentially, it said that it was sonically better to put the groove in the bridge/bridgeplate and then use groove-less bridge pins. This would also eliminate having to file an angle on the pin tips, as you recommend, and I've been doing for over twenty years. I haven't changed any of my guitars to this method, but I think all your many fans would be interested in your opinion of this issue.

[@mikecurtin9831]

Liked, long time subscribed, and now commented. You usually confirm choices I've made or you show me another better way to do things. Thanks, Jerry.

[@bruceducker2029]

Thanks Jerry and Emeri for the content. Enjoyed the video and the instructions.

[@markdannewitz3424]

Great results on the Martin setup! It sounds 100% better than when it first came into the shop.

[@that_thing_I_do]

I was checking along with my tuner while you did it and it was spot on.

[@danielkalbermatter]

Great setup Jerry! Looking forward to get my mandolin setup by you.

[@mrlownotes]

Thoroughly educational and enjoyable. Once of your best Jerry. Thankyou.

[@daveogarf]

Emeri, I'm glad you're aboard the "Jerry Express". Your talents really shine through.

[@jthonn]

I like your setups, this one is low. I try to set them .090 big e, .080 small e. After I sand the saddle if it is close, I leave it alone. You did teach me something with the nut, thanks Jerry!

[@johnnieboi]

I've been following you for what 3 maybe 4 years?...and this was the most consise straight through guitar set up vid I think you've made!!...and it'll be one of my "go to" tech vids as a reference 😉 🏴󠁧󠁢󠁷󠁬󠁳󠁿

[@Setsofiah]

The most complete, comprehensive and coherent video of a guitar set up routine I've ever seen. Jerry, you are on top of your game.

[@patrickpoire5385]

Great video, Jerry! Clear and concise explanation of the process. And I would certainly not object to more videos with musicians in the shop! 👍🏻

[@antonsworldofvideos8096]

Don't pinch your nuts! Right, got it. Great advice as always Jerry

[@jeffdoyle06118]

That was a really good lesson on nut slots. It was really great to hear it go fro that fuzzy sound to so clear with just tweaking the slots to get them not to pinch.

[@stephensmith60]

Agreed! I Love the Zager guitars too. You sure did a great job, as always. I also string my strings like you. Only I wrap the top three strings just one more wrap, and then cinch it up. I'm also playing a couple of Orangewood guitars, and they too are set-up perfectly. I learned a LOT from you today. Bravo! 👏🏻👍😁

[@susanroycroft89]

Thanks for this video Jerry, it's Don here from Hamilton NZ, I have a similar problem on 1 of my Acoustic's ( a slight hump ) & your simple instruction is Much appreciated, thanks again 😊😊

[@burgerguitars]

You packed an incredible amount of info in 56 minutes! This video should be a go to for anyone wanting to setup their acoustic guitar.

[@taterjay]

Great work and great song choice! I always enjoy your videos, Jerry. Thanks.

[@forthwithtx5852]

I like when Jerry says there’s a really good way to prevent nail gouges on the frets. Trim your nails! Can kinda see why he didn’t say it this time. 😁

[@captainamerica9353]

Wonder if that's why the top is all chewed up above the soundhole? If the owner doesn't trim his fretting nails, he must have nasty nails on his right hand, too.

[@kenk8242]

Excellent job! Oh those Martins are sweet things! Nothing like the sound of those Martins on this earth. In a good way :) that D28 is gorgeous and understated.

[@robbychism]

This was great, I always learn something from Jerry. I especially liked the customer jam at the end... and did you catch the wood on that mandolin!?

[@TKevinBlanc]

Sounded like a different guitar when you were finished. Nice work.

[@tacratt6091]

Taking those heavy Grover tuners off the Martin guitars and putting Waverly’s on it helps tremendously! Takes several ounces off the peg head and lets it vibrate! It gives the guitar a much better feel without the weight on the peg head! Plus they stay in tune much better!

[@johnsee7269]

I've often thought about the added mass/weight of enclosed tuners; even on an electric... I'd say the ones with a thin metal covering might be preferable to the kinda machined metal chunks. But... I love the feel and ease of tuning of the high ratio, metal chunks; most of my 17 guitars have them.

[@mccypr]

Your customer is a good singer! That Mandolin is beautiful!!!!! Thanks! 🌞✌️😎🎻

[@jeffgrier8488]

Nice work Jerry, it's always great to see the customer's reaction, and he's obviously really happy!

[@davidscotbrown3241]

Forget the L.R.Baggs pickup, go for K&K Pure Mini. Great sound, no battery... no problems

[@dfz6925]

Some great down home vibes in this one. Thanks Jerry.

[@wsearp]

When tuning the B string don't tune it open.... Fret the third fret and use your tuner to tune it to D.....That usually makes the B string sound more in tune.... Works best for me....

[@FunsongsMusicByPeterRahill]

Hmmm... interesting. The method I use is octave-tuning at the 7th fret; 8th for the B string.

[@robertshorthill6836]

My old J-50 Gibson, you know, with the GD ceramic saddle, was a bugger to tune the B string. I just tuned it in unisen with the open E and left it alone. It wasn't 100% perfect but 99% was close enough to bluegrass that my mates couldn't tell the difference. Bob

[@akashbaruth1658]

I wish I had as much tools and gadgets like you👍💯

[@billallen1594]

Great set up video Jerry. And good tips for the nut. Knew which mandolin it was. Guess how? Volume, of course... 😂

[@jasonaustin3270]

Good song choice. Merle Haggard always a good choice. Good set up, thanks for the video

[@abloke8834]

Fab! Cheers Jerry. All the best mate

[@wings1856]

Hey Jerry. I always enjoy watching your stuff. I’m studying the Luthier business by watching you and some others. I hope to be a decent one one day towards the end of my airline pilot career. I’m also an aircraft mechanic and I love the “science” of building and maintaining guitars and mandolins. Got a question… In this particular case, would you consider compensating the nut as well as the saddle? If you had to do it again? I don’t think I’ve ever seen you do that. Not sure what the advantages or disadvantages are?

[@JimsevenFrankenstein]

Fantastic work as always 👏

[@andrewwilliams6820]

A really great video Jerry. You are a master.

[@ErikKatgerman]

to me troublesome times are roaming, once more and as i once told you already, Jerry, you get me through again..... Thank you for this darned good video!!! (yep, needed to put 3 of them ! thingies there)

[@luissaints7082]

from Brazil , thanks !

[@tonguy5]

Why not ream/taper the stringholes to match the unslotted pins and also slot the bridge for the life of the bridgeplate? A reamed/slotted bridge with unslotted pins is superior to the standard Martin configuration with straight (unreamed/untapered) pin hole and slotted pins. Helps to reduce wear on the bridgeplate where the ball-end contacts the bridgeplate.

[@glenncarr2121]

Well Jerry , All I can say , because that always happens to me ! That is why I replace the strings one at a time ! Truth be told , I am sure it has happened to all of us no matter how Perfect we think we are !

[@benjellow9785]

Great job Jerry!

[@Roundjammer]

Jerry, you had a video "214 RSW Gibson A Model Worst Fret Board Ever" I was just watching and a picture of an owner with a young lady. I believe the woman is Dale Evans before Roy Rogers. Thanks for all you do.

[@BrianWMay]

Must confess for string fitting, I use the 'Dave Doll' method which (for me) is simpler and have never had a string break or slip and it looks real neat. Bottom line is, whatever works that you're happy with.

[@paulnicholas5082]

A little high on the g.... and don't pinch yer nuts.... classic!

[@rickfletcher5053]

He has a good voice

[@russbeston1729]

Don't pinch your nuts. Good one Jerry.

[@pecktox]

Cool i learned something about the nut.. thanks...pex

[@eddyj3862]

Jerry, were did you get your crowning file and leveling apparatus??? You are the Man!!!!!! xxx

[@paullanier8280]

Jerry, you are better than %99.084 of the other guys and gals who make luthiers appear to work magic on acoustic instruments . On the other hand, I cant see 0.001" at the nut in front of me or across the creek ! ! ! My calibrated eyes are too tired. Hahaha !

[@Tom-in8jz]

Dagg Jerry, what are ya , stringing with gauge I mean Air craft cable ?

[@johnthomas2255]

Great set up JERRY YOU ARE #1 TO SET UP A GUITAR & MANDOLIN.

[@dave7010]

As Dave would say“you don't cut the strings until you have all six strung up and tuned“ 👍Maybe a bit of pencil lead? You will NEVER be able to set up a Martin as good as a Taylor.

[@dscdrkel5546]

You could if you were changing the bridge. then with care you could make intonation right on zero cents. REMEMBER A GUITAR IS ONLY IN TUNE A FEW SECONDS**as soon as you put your hands on the neck it goes out of tune approx 5 cen ts***THAT IS THE REASON**NEVER TIE A SOULDER STRAP TO THE PEG HEAD **DR KEL

[@david25876]

Thx Jerry!

[@wickedgit]

Everyone does mistakes and there is only one thing to fix that....do it again and do in the correct way!:) I do tend to use a string winder...i find the easier than cause you always need to hold the string when you do your method cause i sometimes loose the grip on the string and it slips away specially the unwound strings.

[@mfc4591]

Fantastic

[@tonynorris6157]

It 9/24/2023. Are you still working?

[@stu-j]

I never cut my strings until everything is complete just incase I hit a problem and the strings need to come off as its a pain re stringing without length.. them chromatic tuners are just not very accurate at all Jerry invest in a strobe tuner as they are 30 times more accurate to 1/10th of a cent than a chromatic.

[@georgefrench1907]

“Grabbing your skin … or whatever.” Yeah, keep your whatever away from yield fret ends. 😄

[@zapa1pnt]

Oooohh! Ouch!

[@FunsongsMusicByPeterRahill]

109th LIKE posted at the funny-punny part 12:08 - "...bee-good oil... it's food-grade... non-toxic,... eco-friendly... all those 'buzz' words." :0)

[@jamesfriestad3164]

Who else has the guts to fix a guitar on camera with the customer behind you!

[@billyporterfield7755]

Great Video but the mandolin drowned out the guitar. Would have been better to hear the guitar since that is what the video was about. Great instructional video! I love these! I give this one a 10.

[@dwsnsgp]

What was wrong with the old pins.?

[@pmscalisi]

They were unslotted. That bridge setup requires slotted pins.

[@zapa1pnt]

@@pmscalisi: No, that was the new pins. The customer just had new pins to put in. There was no mention of the old pins.

[@zapa1pnt]

If they were the original pins, they were probably plastic.

[@philipsanders7694]

Wrong string, I've done that once,a few times

[@rdooba]

Hi Jerry, i didn’t hear how many thousandths your pick was to test action one the first fret? I went back and looked but I didn’t hear what it was. Can you tell me what that measurement is that you used? Thanks in advance!

[@stevedimebag]

16

[@ScottHz]

Tom T. Hall!

[@AmosBHaven]

In my experience/s with under saddle pick ups? Is that it sounds more like an electric guitar then acoustic. If I wanted my guitar to sound electric? I woulda bought an electric! Lol! LR Baggs "Lyric" is what I have in my acoustic. Yeah, there's pros and cons with different pickers and sizes of venues and all that. Mostly cuz the Lyric turns the whole "box" of the guitar into a microphone. But as far as a "truer" sound of the acoustic? It's purdy darned good!

[@Trev0r98]

if it was me, i would've put a fresh, new low E string on the sumbeetch. But that's just me.

[@RosaStringWorks]

It was brand new and fresh

[@Trev0r98]

@@RosaStringWorks i guess i meant, i would not have re-used it after the first time i put it on, and after i had clipped off the excess. maybe a bit of OCD on my part.

[@mikepower4113]

Hey Jerry

[@dscdrkel5546]

How many cents is really close??????

[@zapa1pnt]

I would think 2. But then, that's just my 2 cents.

[@dscdrkel5546]

@@zapa1pnt ***Thanks for your 2 cents worth***I think Jerry should say what the cents readiing is***DR KEL

[@zapa1pnt]

@@dscdrkel5546 You're too serious, Doc. It was a joke. 😁

[@dscdrkel5546]

@@zapa1pnt ***You are a great fan **Jerry needs more commenters like you. ***DR KEL

[@jamesgero5730]

to be clear a tight saddle is improperly fit, exact is right but it MUST not be bound at all,,, it is best described as A PISTON, not sloppy for certain but jammed is not right either.

[@pmccartn7777]

How much coffee did Jerry drink this morning?

[@jimmykarva4328]

Keep playing those guitars, and remember... Don't pinch your nuts. 😂

[@I-apologize-in-advance]

copyright infringement for using my name :)

[@dscdrkel5546]

You could if you were changing the bridge. then with care you could make intonation right on zero cents. REMEMBER A GUITAR IS ONLY IN TUNE A FEW SECONDS**as soon as you put your hands on the neck it goes out of tune approx 5 cen ts***THAT IS THE REASON**NEVER TIE A SOULDER STRAP TO THE PEG HEAD **DR KEL

[@robertorozendo2328]

well, the owner is a heavy picker

[@captainamerica9353]

And doesn't like cutting his nails. Did you see how chewed up the fretboard is?

[@alethacriss9308]

????? Oh it's a squeaky fan! It sounds like a tortured bird!

[@zapa1pnt]

And you are familiar with that sound how???

[@billwebb3371]

You should see that fan, it's olde as Moses. I'd squeak too if I was that old.

[@mikeenos4040]

You forgot to show how to set neck relief

[@dscdrkel5546]

****PLAGIARZED***As Dave would say“you don't cut the strings until you have all six strung up and tuned“ 👍Maybe a bit of pencil lead? You will NEVER be able to set up a Martin as good as a Taylor.

[@bobbysipes2469]

Your working too fast because the customer is sitting there.

[@michaelburkmier488]

I will put my gf 360 tak up against Martin any day

[@sgholt]

LOL...

[@rolandreyes2636]

𝐩𝓻Ỗ𝓂Ø𝓈Ｍ

[@mikeenos4040]

You fog