$595 Remote Hydraulic Kit for Kubota Tractors - Updated - No drilling required! 15 minute install

Check out the kit at www.tractorinnovations.com/kubota
This kit adds remote hydraulics to your Kubota for 1/3 the price of the dealership. You be up and running in as little as 15 minutes with the Plug & Play kit. Everything is included, even the shipping. Over 1500 satisfied customers are getting more utility out of their tractors with this kit.
Updated Kit includes a bracket for no-drill installation on L & MX series tractors newer than 2003 (LXX40 and Lxx60 Grand series will still need to drill mounting holes - see my other video for installation instructions).
Compatible with:
L Series Tractors
L Series Grand Tractors (L2530, L3540, L5860, etc.)
LX Series Tractors
B Series Tractors
BX Series Tractors - See other video for installation on Swift-Tach loader
M Series Tractors
MX Series Tractors
The original video with footage of the kit in action can be found at:
• $595 Remote Hydraulic ...

[@paulinmt2185]

Awesome! I've got the L3700SU and your package looks super easy to install. Seriously considering getting the kit! So nice to see the full install. Cheers.

[@patrickparadiso87]

This Kit works Great on my Kubota L3901, Andy thank you for your quick responses to my email info requests. Quality and attention to details is obvious, Everything installed and functions as promised. Thanks again.

[@SurvivalBrothers]

Just installed the Quick Connect and it was very simple! Communication was also GREAT when ordering the kit! Thank you!!

[@spiceian]

Great video. I figured I would need a diverter valve but was at a loss to how to connect. Decent production values too. Great job!

[@CaseysOffRoadRecovery]

Just ordered your kit for a customers tractor. Thanks

[@timsmith1815]

Bought this kit for L3800 kobota. Got it to use with grapple very easy to hook up. Works great & saved $ too.

[@jimboportman]

Took me about 42 min. Dang it! Works like a champ on our arena drag.

[@FireBosspilot]

That's flippin' Awesome!

[@ronaldmonroe7490]

I bought one of these for my 18 yr old Massey Ferguson 1433 Tractor. Great way to add a set of hydraulic couplings to the front or rear of tractor. Mine use the bucket tilt function to operate. Haven't had a problem. Thanks.

[@TractorInnovations]

Glad to hear it's working well for you! We just passed 2,000 of these kits in use!

[@MikeBosley]

Excellent job on the video as well as your narration. Also, you're an okie so double bonus points. Also, somehow you managed to do all the without getting any grease on the nice blue shirt. Triple bonus points! :-)

[@TractorInnovations]

Thanks for the encouragement!

[@Buckswoodshop]

Got my kit and it’s awesome! 👍👍

[@TractorInnovations]

Glad to hear it's working well for you! We just passed 2,000 of these kits in use!

[@JonesboroughWeatherCam]

Great video!

[@TractorInnovations]

Thanks!

[@26tntljb30]

can it be used with kubota M4 2021 w/cab? It already has the 3rd function on the front

[@Meterman1980]

Just ordered the kit today. After looking at my new Kubota L4701, the bolts are spaced wider apart under the loader control where the bracket mounts. The middle set of bolts like you removed, are the ones I’m referring to.

[@TractorInnovations]

Yes, the newer tractors have wider bolts, and your kit has the right bracket to mount on those wider bolts. You're good to go!

[@russelaceto2394]

I am looking to run my wood splitter and this likes a reasonable solution. Possible? What connections off the front would I use?

[@TractorInnovations]

Yes, I have had quite a few customers set this up to run their long splitters. It comes with 1/2” Agriculture style quick-connects on the remotes - it comes with a set of make and female tips, and you can find additional male tips for your other implements at any farm supply store. If your log splitter had its own control valve, you’ll pull the switching valve, then simply bungee-cord the loader control to provide constant flow to the remotes. Andy Www.tractorinnovations.com

[@hanshaw1974]

Could this valve be used to run a hydraulic thumb on a back hoe? JD had a valve like this. This is a great idea for some one.

[@TractorInnovations]

Yes, absolutely. I can build kits for just about anything like that - I just need to know hose lengths and what the connectors need to look like. It should wind up the same price or less than the standard kits I build.

[@robroby208]

I have a Kubota MX5200 w/LA1065. Want to operate a grapple. Will the factory joystick operate all functions or do you have all use the divertor button in between movements. Can't find a video showing grapple operation. Thanks, Rob

[@TractorInnovations]

Most folks that use this with a grapple install the kit on the "dump/scoop" function. So with the knob out, you can lift and grapple at the same time. With the knob in, your loader works as usual. This is the dead simplest way to get that function on your tractor. Made in USA parts, nothing electronic to break!

[@harryp1249]

Looks like a great product. Is the company still in Muskogee Oklahoma?

[@TractorInnovations]

No longer in Muskogee. I moved to Eugene, OR a couple years ago. Still building these and more!

[@Jeo3-4142]

This is great. Made in the USA is even more awesome! Any issue with adding this in addition to the loader 3D function kit on an L3901?

[@TractorInnovations]

Works great even with a factory 3rd function. Just note that on your order, and I'll swap the bracket and a couple fittings to make it mount under the left side of the loader valve, instead of out to the right.

[@Jeo3-4142]

@@TractorInnovations order complete. Thanks.

[@wildlifelive06]

I have a l2501 with no 3rd function. I want to run hydraulics to the rear to use as a top and tilt function. So dual rear remotes. I like the idea of being able to use the 4 loader controls to control both the top and tilt functions. Do you happen to have a video showing this? What would I need to order from you to get that function?

[@TractorInnovations]

Yes! the install is almost exactly the same as this video - just a different bracket, and you install two complete kits. You can active either one or both remotes at any given time. I can knock $50 off the second kit, and I sell the top link and side link as well. www.tractorinnovations.com kzbin.info/www/bejne/kJ_Neol6mJinepY

[@doughughes3572]

If I have a BX1500D with no loader and no remotes of any kind, do you have a kit to add a joystick control to that? (for example if I want to get a snowblower mounted on the front and connected to control joystick to raise and lower)

[@TractorInnovations]

Sorry, my kits require a loader.

[@dubbsj]

Would you be able to flip this over vertically? I have a Kioti DK4510 and the bolts on my loader control are on the left side of the plastic frame. The valve would need to be mounted between the loader control and the dash.

[@TractorInnovations]

I build everything to order, so I can fit whatever needs you've got. Yep, flip it over vertically is no problem. Send me a couple pictures, and I'll get it done for you. 541-972-0546

[@prestonthompson9848]

Would you hook things up the same way for a grappler in place of a bucket?

[@TractorInnovations]

Yes, works just the same. It comes with 8' of hose - enough to reach the rear of the tractor for rear remotes, or to the front of the loader arm for a grapple.

[@nickg2366]

Will this still work if you already have a 3rd function installed for the front? Looking to add a hydro top link.

[@TractorInnovations]

Yes, it works well with a 3rd function installed. Let me know that when you order, and I change around a couple fittings and the bracket so that the valve sits underneath the left side of the loader valve. Clean, easy, professional looking install.

[@waynetaylor8607]

I ordered a hydraulic kit for my L3560 with LA805 loader a couple days ago. Have not received it yet. This installation video shows installation of the valve bracket on the bottom of tractor loader control lever. My L3560 has its control lever mounted on the right side of the seat, i.e. not like the control lever shown for the L3700 in this video. I am hoping that the kit will have a bracket that works for my tractor? Will it? This kit is genius, by the way.

[@TractorInnovations]

Yes, I build these to order, so if you order with a different model of tractor, I'll build for that. Your installation will look more like this other video: You will drill two holes in the firewall to mount the valve. kzbin.info/www/bejne/m5O3qo2DqL2XndU

[@joemommone3619]

Great video Andy, you sold me. Where can I purchase your kit. Thanks again.

[@TractorInnovations]

You can visit my website or give me a call. www.tractorinnovations.com 541-972-0546

[@JoeL-mm2lc]

would this work on a different make tractor with a similar layout? More so the valve and hydraulic lines. Not concerned about mounting brackets I can make those.

[@TractorInnovations]

Yes, I build these for any tractor out there. Send me a picture of your quick coupler area, and one of a quick coupler disconnected, with a view of the male fitting. That's all I need to build you a kit.

[@HeinerStorch]

Thanks for sharing. Can you tell the threads sizes at the hydraulic bloc, as I would like to install a control valve first. Mine is a L2850D (1993)

[@TractorInnovations]

We've had over a dozen installs on that family of tractors. It works great. For your tractor, you'll want the economy kit. It taps in where the rubber hoses meet the steel lines on the right loader arm. Everything about this kit is after the loader control, so that the over-pressure safety system is preserved. One circuit of the loader valve then acts as the control valve for the remotes. Simple install with no electronics!

[@HeinerStorch]

@@TractorInnovations Thanks for response. Could you shed some light on the economy kit, please. Never heard before. Besides this, I tend to install a DIY solution.

[@duckskipper441]

Is this kit available for a AG-CO ST34A this is the solution I've been looking for

[@donrenfro3750]

Would this kit be co-compatable with a Kubota LandPride 3rd function kit that is already installed on a Kubota L3901 tractor?

[@TractorInnovations]

Yes, it still works great. Just let me know that when you order, and I'll swap a couple fittings and the bracket to make it sit under the left side of the loader valve. This also works when you want to install two kits. Many successful installs with a 3rd function already in place.

[@waynetaylor8607]

I want to use the front bucket lift hydraulic circuit (not the curl circuit) to control the top link in the rear. It is not obvious which hydraulic hoses for the loader bucket I need to connect to the diverter valve to accomplish this. Are they color coded, or identified in some other way?

[@TractorInnovations]

Yes, they're color coded. Give me a call with the model of your tractor and I can tell you which ones are which. You can also trace the hoses back from the lift or dump cylinders to figure out which are which.

[@atlucas1]

I have an L3302 with a 3rd function kit hanging off the place where you mounted the rear remote valve assembly. I can't imagine I'm the only one - have you seen this, and do you have a different mounting solution?

[@TractorInnovations]

Yes! Check out this other video. You have the choice to power the remote from one of your loader circuits or the 3rd function. kzbin.info/www/bejne/bYq8Z4t_eN18prM www.tractorinnovations.com/3rdfunction

[@coltbrown389]

I have a 3rd function valve already on a L3301 for my grapple, is there a kit for top link and tilt for running a box blade?

[@TractorInnovations]

Yes! I just installed one of these today on a L2501. You'll install two complete kits. I can give you $50 off the second kit. If you want to start with just one, try it out, and add the second one, that works well too. Youc an order one on my website, but if you want two at the discounted price, shoot me an email. www.tractorinnovations.com [e-mail]

[@metalhead4700]

How might this work on a newer B-series that has all four loader couplers on a single block?

[@TractorInnovations]

I have a solution! Same price, easy install - you take out the entire top part of that system and replace it with individual quick couplers. Here's a video of that full install: kzbin.info/www/bejne/qJeni2aJZdFjZtE

[@joerepic5171]

Excellent video. Do you have kit for Zetor 6441 Proxima?

[@TractorInnovations]

I haven't built one for that tractor yet, but I am always adding to my library. Send me pictures of the loader couplers and possible mounting location for the valve. I can build it for you.

[@elijahgilliland2311]

So with this kit I should be able to run a hydraulic top and hydraulic tilt cylinder on my l3901 for say a box blade?

[@TractorInnovations]

One kit runs one remote function. I've had quite a few people install two kits for double function like you suggest. Then you control top link and tilt from the same joystick. Email me and I'll send pictures of that install. I'm happy to offer $50 off the second kit.

[@santarosacartunes]

I'm a little lost on something. I want to control a grapple on my Kubota L3560HST-LE. Does this kit do that. You ran the hose to the three point. I'm curious can you run it to the loader area and connect a grapple. Sorry for my ignorance. When I bought my tractor I stated I was going to get a grapple and they sold me a tractor without the secondary hydraulic connection. Now they want $2700.00 to install what I assume you have. Thanks for your response ahead of time and if you have what I need I will be purchasing it from you. Good video and thanks again Michael

[@TractorInnovations]

Yes, this works great to control a grapple. Here's a video of how that works. I build the same kit whether you're running it forward or back. kzbin.info/www/bejne/iXure6yZZ9log9E

[@christophersoberg2627]

I have a Bx23s with the backhoe option. Is there any kind of way that I can use the hydraulics already back there?When the backhoe is not on

[@TractorInnovations]

Yes, I build a kit for that with its own spool valve. 541-972-0546

[@elijahgilliland2311]

And I would I still be able to use my front end loader with the system hooked up?

[@TractorInnovations]

Yes, absolutely. With the knob in, the loader works as usual. With the knob out, you trade one of the loader functions for the remote. So with the knob out, you control one loader function (your choice whether you keep lift of dump function) plus the remote.

[@naturalobsession5480]

I have a Kubota L3301 with LA525 loader. I’m needing hydraulics ran to my three point area to power hydraulics on a woods TSG50 stump grinder. The grinder already has a joy stick for controlling it. Would this kit be practical for that or do you offer another solution? If it will work with this I may go ahead and get this so I can eventually add a hydraulic top link.

[@TractorInnovations]

Yes, this kit can provide constant flow to the remotes to power your stump grinder. You woulc then control it with the joystick. It will also work perfectly with the hydraulic top link.

[@commandercody38]

@@TractorInnovations I'm thinking about getting this for a custom wood processor I'm planning. It would need constant flow but I don't see how that'd possible if the loader control valve is in the way. Would I leave it in float mode?

[@saltysailors1]

I have kubota l3901. I would like to add 3rd function on front as well for grapple. Will this kit still work?

[@TractorInnovations]

Yes, this kit can work well in a couple different configurations. You can install two complete kits, giving you front and rear functions, or you can install an electronic 3rd function from another vendor, and use this kit to select between the front/rear functions. I can knock $50 off the second kit if you install a double kit. Super easy installation. Email me for pics. [e-mail]

[@ez4453]

how is this different from factory rear remotes? Is it just that you can install on the front of the tractor and not the rear?

[@TractorInnovations]

Yes, you can run these to the front or rear. These are a universal and affordable way of getting remotes on lots of tractors - many of which you can't get parts for, or are really expensive. This uses a made in the U.S. valve and hoses. And you get insanely good customer service. Call me! 541-972-0546

[@Just_Chuck_It]

Will this work on a Kubota BX23s? Also, will you be offering a 3rd function kit? For grapple use?

[@TractorInnovations]

Yes, works great on the BX series. Those often have the swift-tach 4-in-1 hydraulic couplers. Here is a video that shows the install on BX series: kzbin.info/www/bejne/qJeni2aJZdFjZtE

[@Just_Chuck_It]

@@TractorInnovations Awesome. Thank you.

[@jarbl1776]

Will these work on the new LX3310's? They should be very similar to the B3350.

[@TractorInnovations]

Yes! Several customers with LX series tractors have given feedback that it was a simple install, and is working great. You've got quick-couplers, so you'll want the plug&play kit. $530 total with free shipping. Visit my website, or give me a call to order www.tractorinnovations.com 541-972-0546

[@jarbl1776]

@@TractorInnovations Thank you. Any idea what top link would work best for this tractor?

[@skyking6726]

could this be used to run a hydraulic post pounder? the post driver specs says this. "The return line (dump line) must return to your hydraulic fill reservoir. This line cannot be quick coupled back into your machine." ? not really how to ask!!!

[@TractorInnovations]

Yeah - some implements are really picky - they can't handle any back-pressure in the return line. Not a problem - this kit can provide the pressure side, and then you would plumb the return line directly to the fill reservoir on the back of the tractor.

[@ashevillecat]

What, exactly, is the difference between the $530 "plug and play" kit and the $480 "economy" kit? I want to put one of these on my Kubota L3901 to use the hydraulic feature on my flail mower. It's not really clear what the difference(s) between these kits are on your website, other than the $50 price difference.

[@TractorInnovations]

Hi Pauli, Thanks for the question. For an L3901 The plug & play includes the quick couplers with the kit, so that all you have to do is disconnect your existing couplers, and plug these in. The economy kit for your tractor would come with threaded connections, and you would disconnect the quick couplers, then unscrew the male quick-coupler tip from the tractor over to the switching valve (using pipe dope to seal it). Then use the threaded fitting to connect the hose, and connect the quick-couplers. With either kit, you can still remove your loader as designed. So it's your choice if you want to have super-quick install or save a little $. I'm happy to fulfill your order! For older tractors without 4 quick-couplers, the economy kit taps into the hydraulics where the rubber hoses meet the steel lines going up the loader arms.

[@wayneguy1965]

could your valve system be modified and used on a Kubota b2301 with a bh70 backhoe using the power from the loader grapple, with a split connector so hoses can stay fully connected and operate a thumb on the backhoe from the backhoe seat configuration .

[@TractorInnovations]

Yes, absolutely. I would just need to see the connector type you want on the input side of the switching valve. Send me a picture of the output of the grapple valve - that's where you'd swap the hose to go to the switching valve, then outputs go to either the grapple or the rear/thumb. I build every kit to order, so it will cost the same as a regular tractor kit. Andy

[@wayneguy1965]

@@TractorInnovations SORRY it's taken so long to reply , i will be contacting you in the next couple days

[@johntrayer3903]

Any chance of you updating with a link to the product. Neither this or the Mahindra video have a link or state where it can be purchased. If you give the name of the company that supplies it I must have missed it in the videos.

[@TractorInnovations]

www.tractorinnovations.com

[@billskeen68]

Any plans to make a kit for the LX2610?

[@TractorInnovations]

Yes, This works perfectly on the LX series tractors. Your loader control is mounted in a different spot, so customers have simply mounted the valve to the dash. We have dozens of installs like this, and they're working great. You can order on the website, just type in your model of tractor as you add it to the cart.

[@PencilProper]

Will this work on my Kubota B3150 which already has a third function from the dealership? I want to add a hydraulic top link

[@TractorInnovations]

Yes, it will work great. You can choose to have this kit operate independent of the 3rd function, or actually have it switch the 3rd function. You can have the 3rd function control the front grapple, and then when you pull the knob, your electronic switch controls the rear remotes. That way you don't have to trade away a loader function. Very flexible - I can build however you want. Give me a call 541-972-0546

[@stevemartinson4012]

Is it possible to hook this up to my third function valve on my Kabota L 2501 and switch back-and-forth between my grapple and my top link allowing the button to operate either or?

[@TractorInnovations]

Yes, it works great for that. Juts note that in the loader info as you add it to your cart. I do top links as well. Check them out on my website. www.tractorinnovations.com

[@michaelwithrow5660]

@@TractorInnovations m

[@darrellfagan4899]

Looking to see if you could add two remotes

[@TractorInnovations]

Yes! I build a custom bracket to mount both switching valves under the loader valve, and you can have one or both activated at any given time. You can control both rear functions (or one front, one rear) from the loader joystick. I can knock $50 off the second kit.

[@brendanchase9068]

Whereas this is tied to the loader valving, would this work for a woodsplitter hook up?

[@TractorInnovations]

Yes it will, but you'll need to bungee-cord the loader control into position to activate the constant flow to the rear (then you use the log splitter valve to move the piston). Mush like this video of this kit running a backhoe: kzbin.info/www/bejne/qnfbaZR8fppneJY

[@brendanchase9068]

@@TractorInnovations Thanks! And tieing it off like that wouldn't generate too much heat in the valves?

[@JjJj-bq7le]

So you have a kit for the b3000 with the cab...

[@TractorInnovations]

Yes, this works great on a B3000 cab. Check out this video on an L series with cab. kzbin.info/www/bejne/iJe7e52kgJqGprs

[@MrEjewett2009]

Can I install this on a bx2370-1 with an all steel Curtis cab installed

[@TractorInnovations]

Yes - I'd just need some pictures from you of the access hole where we could pass 6 hoses through. Text to 541-972-0546

[@Heritage_Hill_Farm]

So if I need dual rear remotes I can just buy two kits and hook in?

[@TractorInnovations]

Yes! This works great as a double kit. I can even give you a discount on the second kit.

[@GrandviewTrailerSale]

If you take the loader off, will this still work?

[@TractorInnovations]

Yes, on every modern tractor. Anything with 4 quick couplers on the loader, and you’re golden. That’s every Kubota after 2002, and a few before then.

[@jimbok2492]

I need this kit for my 2019 l3301

[@TractorInnovations]

This kit fits your tractor perfectly. It will come with a longer bracket to fit the wider bolt spacing of your loader valve. Still a no-drill installation. I am all caught up in the shop, so I can have it on its way to you tomorrow. Just order on my website or give me a call. Your tractor uses the plug & play kit. www.tractorinnovations.com/kubota 541-972-0546

[@garyjohn316]

What about a Kubota MX 6000 w/cab?

[@TractorInnovations]

Yes, those new models with cabs work great! We run the hoses through the access hole in the back of the cab so that you have the switching valve handy inside the cab.

[@sneeeksss]

I need a kit for an L2600. Have you got it?

[@TractorInnovations]

Yes, give me a call. My number is on the website: www.tractorinnovations.com

[@KABOC0828]

Will this work on a l2850 kubota

[@TractorInnovations]

Yes, you'll use the economy kit, because that tractor uses threaded fittings instead of quick couplers. You'll tap in to the hydraulics where the rubber hoses mees the steel lines on the loader arm.

[@jerrytheriot6113]

I have a set of hydraulic lines going to the rear of my L2501 to operate my backhoe. I want to install a Trim and Tilt kit for my 3 point. Do you have a kit that can connect to the backhoe lines that I can use to operate a Trim and Tilt?

[@TractorInnovations]

I don't yet, but working on that. I'll let you know when I've got it ready.

[@kevincomer3231]

Do you have a kit that will control tilt and angle cylinders.

[@TractorInnovations]

Yes, you can install two complete kits. I can knock $50 off the second kit. It works really intuitively - the top link is run off the lift circuit (forward/back motion of the control lever), and the tilt is controlled by the dump circuit (right/left motion of the lever). I am updating my website to include the double kit option. Until then, give me a call or email. I can take an order by phone or send you an invoice to pay from. 541-972-0546 [e-mail]

[@davidhenry4412]

M7500DT, no loader?

[@TractorInnovations]

Sorry, gotta have a loader in place already for this kit to work.

[@michaelcumbass3882]

Where can I buy this at for my mx5300

[@TractorInnovations]

Available at my website www.tractorinnovations.com

[@ripdinecola4755]

Will this work on a 2000 model L3000?

[@TractorInnovations]

Yes! That model can have some older versions of the quick-couplers, so send me a picture of one of them disconnected so that I build your kit correctly. Easy install even on the older tractors. Email or text me - those numbers can be found on my website: www.tractorinnovations.com