5950x RandomX Hashrate Disappointing | Mining Basement Max Power

CPU Settings: 37 Ratio 0.9v XMP1 3200mhz CL16
Threads argument:
"cpu": { "rx": [0,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30], "huge-pages": true }
5950x: a.co/d/5K63wMn
Motherboard: a.co/d/7oiD7vd
RAM: a.co/d/4MGE5sp
Cooler: a.co/d/cO8JQ40
USB Sticks: a.co/d/htosqsL

[@BlessedNoob]

Cpu threads argument, put this in CPU CONFIG box, "cpu": { "rx": [0,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30], "huge-pages": true }

[@rolandkluka7031]

Thanx a lot ❤. I use windows at the moment fo 5950x rigs, becaose i have etcmc nodes in them also. I tried to pot it in the config file for mxrig, but did not work for me. But I figured out a way. For windows, it works if you put in comand --threads 30 --cpu-affinity 2147483645.

[@Farquarto]

when i put this command into the cpu config my xmrig dosent work it says document is empty can u pls post your fully cpu config so i can copy paste and make sure that i dosent do typo

[@NewEnglandCrypto]

Forward. Progress. Only. 🎉🎉

[@theonewhowas7709]

i like it!!!!!!!... do you have video or use 5600x im not great and tuning or OC'ing cpu.. also if i remember i think if you do amd-info in shell.. might show cpu temp.. havnt done it in while i dont remember if its only for gpu or cpu as well

[@BlessedNoob]

Don't have any 5600x. Just 3900x, 5800x and higher tier cpu

[@lolPaperclip]

Buying 2 5950xs was such a mistake, I overclocked and undervolted them...and they get like 42 MH on verus.... for the price of set up.... I could get like 150-200 MH worth of phones cuz I am Paperclip

[@BlessedNoob]

Yea I think they're best suited for Randomx or Yespower

[@rolandkluka7031]

Hi, what is the comand to skip the 2. and the last thread for 5950x thanx

[@BlessedNoob]

Oops sorry, forgot to add add to description. It's there now

[@chrisewalt3806]

What motherboard are you using

[@BlessedNoob]

In the description

[@bobbyjohnson116]

What's the hash rate for Scala?

[@suaibmahmudpalash6155]

will r9 3950x be the same as r9 5950x? what do you think?

[@BlessedNoob]

It'll be close, but 5950x should be more efficient

[@dastardlyman]

ive got a lot of ryzen rigs, i dont have a 5950x - i think you need much better ddr4 for a 5950x. IMO ddr4 3600 with tight timings. remember the 5950x can easily do an fclck of 1800 - which matches the ddr4 at 3600 . ddr4 3200 suits the ryzen 3600 and 3900 really well.

[@dastardlyman]

my ryzen 3950x gets 15,500 on randomx with hardly any tweaking - just run the ddr4 xmp profile

[@BlessedNoob]

Yea, thanks for all the info! I'm super new to cpu mining so all these settings and ram subtimings I'm not familiar with. I will definitely give these a try eventually

[@jackrushinsky8294]

@@BlessedNoobjust use the ryzen dram calculator. But I don’t think there’s to much more performance per watt on the table

[@user-bh9yk2wv4w]

@@dastardlymanya but at what voltage/watts

[@RohanSanjith]

What about 3700x?

[@BlessedNoob]

Don't have any, and too low of a tier cpu and it's too old imo to bother sending money on and using

[@sammyslo]

I have two 5950X, one on b550m mb, I get around 13,5kh/s, and on the b450 mb I can't get over 12kh/s. I 've tried everything, and I just can get to 15khs

[@BlessedNoob]

I'm using an MSI B450 and get 15.5 at 131w. Try using the settings in description

[@andrewjones198]

I run mine at base clock with lowest stable voltage, 14.15kh@125w

[@BlessedNoob]

For me this is best. Stable and 120h/w moves around a little. Getting 15.4-15.6kh at 130w

[@andrewjones198]

Silicon lottery winner! None of my 7 units gets those numbers 😢 Just saw you have some thread limiting, perhaps that's the issue? I will give that a go soon, just recovering from a family cold today ugh

[@MrButuz]

I cant get more than 15 out of mine watercooled - dissapointing

[@BlessedNoob]

Yea bummer. I ended up getting 15.5 kh out of mine with the config I pinned

[@vipcrypto4352]

cl16 3600mhz needed for better hashrate, if you have deeper pockets cl14 will be ideal

[@BlessedNoob]

yea that's what i figured. but if im gonna spend bdie money I'll just get AM5

[@RotaryJunkie]

If you really want to get anal about power savings, check your SoC voltage. A lot of boards like to slam 1.1V for 3200mhz when it usually isn't necessary. Will take some testing, but I've had reasonable stability as low as 0.950v, and doing so brings SoC power draw /way/ down.

[@BlessedNoob]

Awesome! This is good to know. I was kinda disappointed with the efficiency but I don't have too much cpu experience. I will have to mess with that and see if I can drop wattage a bit more.

[@RotaryJunkie]

I can't say anything about AM5 as I don't own anything on that socket, but I suspect it might be similar. Might even be worth dropping the RAM clocks to drop SoC more purely looking at mining and efficiency.

[@witness1013]

Ok - this board sucks though. I swapped mine out for a cheaper b450m pro 4.5 - 14.8K @ 78w

[@nakulkundra5779]

Ryzen 7900 is better i think