5PSP Blind Corner (Soft Close) Installation Video

[@WilliamJohnson-xy6wc]

You need to add a part at the end that shows you how it actually works.

[@DP-zs3hg]

Will it work with 17 5/8" opening ? Where I can look more detailed measurements of the product?

[@REVASHELF]

Hi! The 5PSP-15-CR (or 5PSP-15SC-CR) will fit. Please note that the suggested hardware/appliance clearance is 1-5/8". You can find more detailed measurement information here: rev-a-shelf.com/2553?

[@DP-zs3hg]

Just installed 18" shelves for 17 5/8 opening. Working good. Still 1/4 clearance between hinge and shelf.

[@entertainingsamarfamily]

Amazing information sir

[@joannegonet5841]

How far out can the first baskets pull out?? I have a right hand opening face front cabinet. My stove on the left sticks out roughly 3 inches. Will the 1st baskets clear that 3 inches to be able to pull out the blind corner baskets?

[@REVASHELF]

Hi Joanne! This product will not work in that application, but we do have a couple of blind corner optimizers that will! The "Curve": rev-a-shelf.com/2541? and a coming-soon product, the Girasolo! You can find info on the Girasolo here: rev-a-shelf.com/new-product-catalog-2023

[@joannegonet5841]

@@REVASHELF the curve will not work for me since I have a 15” door opening and the min is 18”. The new product does seem to hold too much. Do you have any other suggestions?

[@REVASHELF]

@@joannegonet5841 our Half Moon is the only product that will work in a 12" opening! rev-a-shelf.com/16681?

[@dalemccullough5693]

The parts are mislabeled or don't correspond with the written instructions that come with the product. Number 1 on the video is the Base, but this is labeled as the Frame (B) on the written installation instructions.

[@haidao6037]

Character In the video It's great, I like it a lot $$

[@daninraleigh]

You need to show how this product actually works after it is assembled. People won't buy something if they have no idea what it does.

[@REVASHELF]

Hi Dan! Here is the link to the overview video: kzbin.info/www/bejne/lYSbf4uZipqSpKc

[@ashleepennington2267]

Written instructions are terrible. KZbin was more helpful except, it's wrong also. At the end when you mount to base, you have to have front basket arm pulled out of cabinet for it to slide forward or backward, otherwise it's literally stuck!