6 MISTAKES DIYers Make When Wiring Outlets

These 6 mistakes that we make as DIYers can be dangerous. Are you familiar with all six and how to wire an outlet or light switch properly and safely? #electrical #diy #tipsandtricks
🎬 CHECK OUT THESE RELATED VIDEOS! 🎬
• How to Install a Smart WiFi Light Switch (for Amazon Alexa or Google Home): • How to Install a Smart...
• How to Add an Electrical Outlet for a Wall Mounted TV: • How to Add an Electric...
• 5 CLEVER Electrical Tricks Everyone Should Know: • 5 CLEVER Electrical Tr...
📦 PRODUCTS IN THIS VIDEO 📦
• Klein 15-in-1 Electrical Driver (Paid aff link): geni.us/NijwBk
• Milwaukee Insulated Driver Set (Paid aff link): homedepot.sjv.io/JrdLkq
• Doyle Insulated Driver Set: geni.us/CZnB
• Doyle Electricians Multi-Purpose Pliers: geni.us/YPYQQq
• Knipex Wire Stripper (Paid aff link): geni.us/Kin5AFP
• Klein Automatic Wire Stripper (Paid aff link): geni.us/SSGZCG
• Klein Traditional 6-in-1 Wire Stripper (Paid aff link): geni.us/mNBlKk4
• Wago 221 Lever Nuts (Paid aff link): geni.us/UV6YdB
Links above are affiliate links, which means you pay the same price as always but we make a small commission, which helps out our channel - so thanks!
👍 WANT TO HELP SUPPORT THIS CHANNEL? 👍
Become a channel member! Hit the "Join" button or head to / @lrn2diy
Support us on Patreon: / lrn2diy
👕 LRN2DIY SHIRTS, HOODIES & MORE 👚
lrn2diy-shop.fourthwall.com/
📸 MY FILMING GEAR 📸
Here’s everything I use to film my videos, including cameras, lights, microphones and more: kit.co/nilsynils/my-filming-gear
🕶 SOCIAL MEDIA 🕶
Facebook: / lrn2diy
Instagram: / lrn2diy
Twitter: / lrn2diy
TikTok: / lrn2diy
📲 MORE DIY GOODNESS 📲
Check out our many projects and plans at
lrn2diy.com
📲 WANT TO LEARN MORE ABOUT 3D PRINTING? 📲
All things 3D Printing at The 3D Printing Zone
/ the3dprintingzone
📚 TWO FREE AUDIOBOOKS! 📚
To get two free audiobooks from Audible, just follow this link: goo.gl/QGFC4Q
00:00 #1: Using Back Stab Terminals
00:55 #2: Using the Wrong Screwdriver
04:01 #3: Stripping Too Much / Little Wire
06:27 #4: Too Many Wires Per Terminal
08:57 #5: Wrapping in the Wrong Direction
10:42 #6: Leaving Screws Sticking Out

[@bobrepholz5116]

Immediately to the point with no unnecessary rambling on, brilliant

[@Nocturnal2010]

Agreed 👍🏾

[@shadfish4031]

I just subscribed simply based on this comment Now i will

[@TDC4LJ]

That caught me off guard too…. I thought it was an ad at first.

[@UserName-cb6jz]

Plus the professional quality of both video and audio, and no music (because most of the time it is a poor choice, annoying or distracting).

[@blackdog7275]

Yep that's why I sub'd no bs get to it.

[@1jtwister]

no silly intro, straight to the point, excellent presenter, accurate info, well produced 10/10

[@outofdarts]

Why aren’t more channels this fast and to the point?! Great content.

[@beebob1279]

Because the presenters want everyone to listen to how great they are. That's why

[@bobandy13]

Before even watching the video, props on starting right away and not wasting a minute or two of everyone's time with BS at the beginning!

[@jtotheace1]

Very thankful for these tips! Doing my first DIY electrical. Almost done installing 3 GCFI outlets, 3 lights, and 2 lighted medicine cabinets. Happy to say its going very well.

[@foesfly3047]

So many subtle factors separate ‘good’ instructional videos from ‘just watchable’ ones. Your technical but unpretentious vernacular, set lighting, scripting, sound recording quality, video editing and especially your approachable demeanor and appearance are IMO, Absolutely Perfect for DIY subjects.

[@LRN2DIY]

That's an incredible compliment. Thank you SO much!

[@dfwtxslc]

After 40 years of providing Air Force educational videos, it's a pleasure watching a simple, concise and well-done project with minimal equipment. Thanks for the straightforward approach.

[@valaincort]

Thank you, Nils. Hands down, this is one of the best DIY videos ever. Thanks for the great instructions and the tool recommendations. Wish I'd known all this much, much sooner! 😂

[@JoeJ-8282]

I do electrical work professionally, and I've been casually telling "newbies" or anyone else who is seriously interested in how to wire electrical stuff properly, about all of these tips here in this video... Very well presented and accurate info!

[@davidtaylor8406]

Agreed.

[@LRN2DIY]

Thank you so much! That means a lot coming from a pro like yourself.

[@carlodonnell146]

yes electricity is VIBRATION and it is the vibration too that will cause wires to pull out

[@JoeJ-8282]

@@carlodonnell146 Actually, a loose connection usually gets worse because of heat buildup at the connection where it's loose, expanding and contracting the joint, depending on how much current is going through it, therefore making that connection even looser over time, many times to the point of the connection falling apart, and also even sometimes causing a fire from either arcing, and/or the heat buildup in the bad connection.

[@carlodonnell146]

@@JoeJ-8282 are you saying that vibration is not a factor along with the expanding etc?

[@josephpagan2187]

I enjoy watching “mistakes” videos, and for the first time in my viewing experience, I can say I knew all of these tips. I would most certainly share this with people who are just getting started in their DIY journey.

[@binaryglitch64]

Absolutely correct. What amazes me the most is that you know the common problems we see with DIYer/Handyman work and Apprentices.

[@bubbatime]

I just had to rewire a bedroom in my house. All outlets in my house were backstabbed and one room kept tripping the AFCI breaker, every night. I opened up all the outlets and switches and I didn’t find anything inherently wrong… so I decided to just get rid of the backstabs and wire it up properly with pigtails and wire loops under terminals. Hasn’t tripped a breaker since re wiring. Videos like this one helped put me on the correct path to diagnose and fix the problem correctly.

[@Kpar512]

I already knew many of these techniques, but I was VERY impressed by the "ECX" . Gonna go out and get some.

[@Bub049]

Wow! Was an electrician in the Navy and have done my own wiring for 50 years and learned something new!! Awesome videos!! Thank you!!

[@shawnpa]

You're lever nut expose saved my day with an abs wire that broke off in a tight space.I couldn't believe such an easy fix existed. It's much easier than crimping especially when I can barely fit my hand behind the radiator and transaxle. Wow. That's a lifesaver. Thank you.

[@kevinneal2575]

This was most helpful. Most of us didn’t know at least a couple of these things. Now I’m going back and checking the connections on the job I did a few months ago. Excellent job.

[@acommenter5184]

Thanks for a pragmatic and realistic video. I particularly appreciate that you avoided the grandiose, eye-rolling "Six Biggest DIY Mistakes in the History of the Universe"-type titles that I see all over YT!

[@richardhailey6010]

Excellent video, should be viewed by everyone doing electrical repairs. I've been doing wiring for many years and have experienced all of these mistakes. I had never heard of an ECX driver, but now I need to get one.

[@actionjksn]

I've been doing electric for over 20 years and nothing grips those screws better than the ECX driver bit it is literally made specifically for those screws. But remember there are two different sizes so you have to get the right size. I would just buy both of the common sizes so you're sure to have the right one, they're pretty cheap.

[@jasonj4865]

@@actionjksn Been having issues with Kline #1 ECX tips breaking often. #2 ECX not so much but the only time I use that one is on Eaton breakers and some panel ground terminals. Have you encountered this?

[@actionjksn]

@@jasonj4865 That's funny that you mention that because yes I broke mine as well. I do not attribute it to being an inferior design though, I just figured mine was not very good quality Steel. I don't see where it is inherently any weaker than a flathead. The fact that it grips so well which allows you to apply a lot more torque to it is most likely the cause. I'm eventually planning to look for a set of high-quality ones and if I get several of them I guess it won't matter if I break one I can just put a new one in. I do have a tendency to really crank down on those screws in order to get the best connection possible. Maybe I'll just buy a large pack of cheap ones and not worry about when one breaks.

[@charlesroman9163]

The understandable information per minute on this video is outstanding. I learned more in a few minutes on the topic than the rest of my 50 years. Great video.

[@dalebrookshire2369]

Thank you for this video. I just bought several outlets to replace some of the older ones in my room. You just showed me how to best replace them. Thanks again.

[@teddyoshell2993]

You could probably make a video about me personally and I would still learn something I didn't know.. also, I appreciate you not being above using and mentioning Harbor Freight tools. Great video, yet again!

[@willj1598]

Cool, you learn something new every day, I've been an electrician for 33 years and I've never seen an ECX driver, I'm going to check it out. You're absolutely right about stab-in terminals, don't use them. New ones won't even take a #12 wire because they know they're not good for 20 amps. With a little practice you can learn to wrap the wires nearly as fast. Since you won't have to redo them you'll actually save time. Not burning your house down is another nice perk of properly terminating wires.

[@openeyes-411]

Agreed Will! And for the record, the back stabs won't even handle 15A long term!!! And this is from experience of failures with 1500w space heaters!

[@notbraindead7298]

I first saw the ECX driver about a year or so before I retired.☹

[@IGoProEVERYTHING]

I have always found back stabbed devices to be a lot harder to stuff in a box. So, I always change them.

[@jokeyman2943]

Every duplex outlet I've had to replace-in 3 different homes-had these horrid back-stab wires in place. I literally had to bust apart the duplex fixture to get the wires out. good tips, there is no other way-except the right way with electrical-I've seen more than one house burned to the ground because of faulty wiring. Doesn't take much. One badly wired duplex outlet or switch can bring down an entire home.

[@bigrock61]

40 years here. Never heard of them either. Its pretty neat. Can't tell you how many times I stabbed myself in the palm of my hand. Lol

[@douglashott9843]

Wonderful video, no wasted time, and I spent the entire video learning new things or remembering things I forgot that are important. Thanks for doing this so well.

[@danalaniz7314]

So much great information in a short video. Thank you so much for this great demo and valuable DIY lesson!

[@EvanWhitaker]

This was a great video! The information was well researched, well presented and well filmed. Thanks for making it. I had never seen an ECX screwdriver! I'll definitely be getting one of those.

[@LRN2DIY]

Thanks so much, Evan. I find that I spend WAY more time researching for my videos nowadays so by the time I get to filming and editing I feel like I'm already most of the way done. That said, I can guarantee you I'll still miss some things and mess up so I appreciate everyone's patience as we all learn :)

[@Gods-Elect]

@@LRN2DIY Wasn't that last plugin shown wrong on the white wire or ground wire? I'll go back an check also.

[@Gods-Elect]

10:47

[@tattoo9191]

Good video. Thanks for explaining why not to use the Back Stab Terminals. I've used them before but didn't realize what you pointed out. Thank you for that. I'll never use them again even tho they're more convenient to use than the screws. Great tip.

[@davidgunderson7795]

Yes, I enjoyed his presentation, I built my house years ago but I'm rusty now. Things have changed so much, this type of Quality info can help you get back to it and enjoy working with you're projects !!

[@ustaarthur]

There are so many small and not small tips and advice that anyone can use that they didn't know even after so many years of being a DIYer. Thanks for a great video.

[@N719SM]

Excellent video! Key points I focus on is 6” of free lead from where the wire exits the box, tug test on all wires made up in a wire nut, and wrapping the terminals in either electrical tape or a newer product that looks like a very wide rubber band. Thank you for the video!

[@toriless]

eh, I find tape not as reliable as a nut of those clamps. Wago also makes a push-in version as well, very reliable. I use Wago where I have a ton of wires to connect.

[@joesoika2628]

Very good video my father was a electrician for 30+ years and worked as AA electrician in a major Truck mfg. For the plant. He thought me so much during his life time and i am so grateful for him teaching me and not to make or take chances to have a failure. God bless him.

[@joehurba9897]

Well done, this should help many with doing their electrical in a safe manner, and you own up to past mistakes which is a confidence builder for those who may need it.

[@jamesmay2631]

I am so glad I watched this video. I am 73 and have wired a plenty. I do so many of the things you covered, but as technology continues to advance, I certainly needed the up-tick. The proper tools are necessary to a job well done. A man is only as good as his tool. And an old tool can still get the job done. lol! Your presentations are great. It is shocking how some DIYers get things done. (pun intended) Thanks for the tips and tricks!

[@ty.process]

Thank you for getting straight into the video!! Very helpful information.

[@LRN2DIY]

Thanks!

[@carlodonnell146]

You mean some people like to tell us their whole life story before getting to the purpose of the video? it's humourous ha!

[@clinke2007]

Great advice, well presented. Every light switch in my house was backstabbed and when I replaced them, not only did some wires pop out on removal, some of the backstab holes were dark and/or actually broken from years of arcing due to the bad connection. The sparkies building these houses in my neighborhood were only interested in doing the job fast, not doing it right. And I heartily recommend that set of Milwaukee screwdrivers.

[@RayRay-cu9rt]

Ain't that The American way , the Boss wants it done fast , and skip the quality of work.

[@DonnieBodacious]

Klein, fluke or bust with regard to electrical tools.

[@jaykrom7639]

Had the same problem in my house and 3 times down stream plugs were non operationable until located and screwed on. Real pain to search them out. They should be outlawed.

[@sambasila604]

As a career contractor I love the videos. You have touched on many of the common problems we find. Great work!

[@robertlugo6564]

Very informative and straight to the point. I never knew about the ECX driver, but now I have to get one of those.

[@thercattrainer]

Great video Nils! As one who has done a lot of handyman jobs on the side, I wrap the electrical outlets with electrical tape especially when they are installed in metal electrical outlet boxes. That way the screws are less apt to make contact with those boxes. Also, TY for the tip about ECX screwdrivers. That was very helpful! 😉

[@brightidea1]

The electrical tape is what I was going to mention as well. All the outlet boxes in my old house are metal.

[@JoseMartinez-bb2qf]

Same with the tape 👍👍👍

[@inspectr1949]

Hit the nail right on the head "didn't go to school or trained", 29 years as an Electrical Inspector this sums up the majority of "clients" I have to deal with even electrical contractors as there's no State wide licensing requirements here in NY State, very few even own a Code book, know where to look in it or even know what version is in force in the State.

[@Shoop83]

That's mildly terrifying.

[@inspectr1949]

@@Shoop83 Just the facts.

[@toddtyson3741]

@@Shoop83 i agree

[@edwardguillen4381]

@@Shoop83 someone uses Reddit.

[@Shoop83]

@@edwardguillen4381 Far too much.

[@eladionunez2032]

This guy ain't kidding around. Immediately to the point. Thank you sir. Very helpful tips I'm about to replace 10 outlets . Glad I saw you're video..

[@ghostfox3560]

Glad KZbin recommended this for me. Rather fitting topic and pretty good delivery of the talking points.

[@michaelallen5505]

Just replaced all the backstab outlets in my house with commercial grade outlets. I like the straight wire connections in the back that tighten with screws. Also the internal connections for the plugs are much more rugged and durable. Several of my old backstab outlets were scorched and melted, some of the wiring had to be replaced. I also bought an ECX screwdriver from Lowes, very useful.

[@davidcooper4385]

Go spec. Grade outlets .

[@marshallmcdonald7309]

I am proud to say I have never made any of those mistakes. Except for the ecx driver. I use an insulated Philips. But I'm going to get an ecx. I was taught by my dad, who was a shipboard naval electrician during the Korean war. Fine video, I might add. No drawn out blather. Succinct & informative.

[@saturnknts]

Great video with solid advice! I'm old-school and having to change all the backstabbing in our 90s house as well.

[@CarlosGarcia-wx5kj]

Great video! I always go the extra mile and add electrical tape around the outlets/switches just to keep it safe for the next person when they work on it.

[@Tbones-xs7ys]

I add one last level of protection for your last mistake often seen (leaving the used screws loose). Starting at the top of the outlet I wrap the outlet terminals with one run of electrical tape so that all contacts (screws and wires) are covered with a small amount of insulation material. And thank you for the excellent video, as a DIY person I have made all the mistakes you have shown in the past and have learned some hard lessons from those mistakes. Thanks again, I only wish I had seen this video 15 years ago. LOL

[@davidmayhall3719]

I also tape my switches especially if there are 2 or more so bare Ground wire on second switch don't short the first switch

[@SpaceOddity4214]

I also do that to prevent getting shocked whle manipulating it. However I was told that it was not a good idea because the gap between the screws and the box has a purpose. If there is an overload, it is preferable for the spark to happen in the box and not in the walls. However I did save my uncle from electrocuting himself when he grabbed a plug the wrong way as we wer moving a circuit. So now I put that tape for safety when It's exposed and I remove it when I put it back in. 🤷‍♂

[@Edward-tm1dm]

Electricians don’t put tape on outlets or switches. Homeowners do that. Today most boxes are plastic so no need for tape.

[@nothankyou5524]

And when the tape dries out and falls off, you have nothing, but you think you do. Don't be advising people to install doo dad ideas that have no basis in fact. Just tell people to do what the NEC says to do, which may include following mfgrs directions as the priority, ie, wire nuts.

[@jimmybritt9537]

Thanks for the ECX information 👍👍🇺🇸

[@justinburris2888]

One thing I did learn that was great to find out about was those ECX screwdrivers. A #2 phillips has always served me well but I’m definitely going to be picking one of those up.

[@HellcatM6]

professional inside journeyman here. Great video, There are so many wrong videos on youtube but this is simple and to the point but most importantly accurate!

[@tonythomas951]

Ive been a JW journeyman wireman since 87 and I must say well done sir. Two things I would add is I believe in just 3 wires on a recep unless its a half switched recep. In other words pigtail whenever there are more than just 1 hot 1 nuetral and 1 ground in the box. Wire nuts are a girls best friend as they are better at carrying the current to the other receps than the side tabs of the recep. If you look at the connecting tab between the 2 screws on each side you will notice the bridge between them and how thin and skinny it is. Its that way so you can break it off by bending it. That is so you can isolate the top recep from the bottom one for half switching the recep or in some cases supply the top and bottom receps with there own circuit. That skinny little piece is all there is to carry the load of down stream receps. The second is it seems logical to use short wires from the box to recep but in reality is much more difficult to push the recep back into the box and is against code. I like my wires to extend 6" from the front of the box and my pigtails to be 6" long. Then after attaching the pigtails to the recep and wire nutting the correct wires together simply fold the wires over and then accordian the wires that came from the box into the box then do the same with the pigtails and push pigtails and recep into the box. Using short wires makes it difficult to fold the wires into the box and if something goes wrong the longer wires leave you with enough wire to fix the problem plus code doesnt allow for short wires. Also installing with the u-ground hole up is a good safety measure thats not required by code but is specified to be that way on many jobs now. It would be tough to explain why its safer but trust me, it is.

[@jameslebo6608]

You want to install the receptacle with the ground hole up because of something falls on it then it only makes contact with one contact instead of two. Listen for chance of a short.

[@99bn99]

In some jurisdictions 6" from front of box and ground pin up is code. Here, 6" for a very long time, and ground up since about 2000.

[@tonythomas951]

@@99bn99 Just a little history on U ground up. It was first introduced by Jerome Migetric. Im pretty sure I didnt spell the last name right but he was an electrical eng in Tucson, Az and introduced this idea in the late 1980's. And for those saying it is code it maybe that your local authorities have adopted it on a local basis but it is still not required by NEC. Another electrical milestone coming from Tucson was the Ufer bond or bonding to building steel. In case you couldnt guess I am from Tucson.

[@99bn99]

@@tonythomas951 I understood from a licensed electrician that ground up became code here (Ontario, Canada) about 2000. There were a lot of code changes made about the same time. It used to be that extension cords with right angle plugs hung down installed in a ground down receptacle. For at least 10 years, the new cords hang down in ground up receptacles.

[@99bn99]

@@tonythomas951 thank you for the history. I thought ground pins had been around a lot longer.

[@IsNotAYahoo]

Thank you for mentioning insulation for screwdrivers. I was a professional HVAC technician for many years and I still have my insulated screwdrivers (they are my go-to set, and work equally well for electrical or non-electrical work.) A trick you can use for specialty screwdrivers (or screwdrivers you already own and don't intend to replace) that do not come insulated is to place two layers of electrical shrink tubing over the shaft of the screwdriver (two neighboring sizes of shrink tubing one that barely fits over the shaft and one, slightly larger, that barely fits over the, single layered, covered shaft.) Doing so provides a semi-permanent non-conducting layer and while not as good or as durable as a proper set of insulated screwdrivers they work wonderful in a pinch or for light use.

[@lespaul36]

I never used them as an electrician unless I was around high voltage. Biggest mistakes electricians make is getting comfy on T-Bar, otherwise you should not be grounded to get zapped unless in a high electrical field area. Most of use wear good boots and whatnot to prevent grounding. But we get cocky and lazy, then electricity reminds you not to. I seen guys that know their stuff grab live 120v in one hand and a meter in the other to check because they knew they were not grounded. I am still not that ballsy.

[@toriless]

Yes they do

[@nothankyou5524]

Your comment is irrelevant

[@leomcnamara8711]

Superb! Love the simplicity and tour knack for getting right to the point.

[@tom_olofsson]

Thanks for turning me on to the ECX driver. Always learning.

[@timmack2415]

As a 30-year electrician, I appreciate the direct, concise advice here. The no nonsense approach is fantastic! I can't begin to tell you the amount of diy mistakes I encounter. Whether made last week, last year or last decade, they eventually come back to bite you....or the next person.

[@NoNORADon911]

I had to start skipping through this, its for people without common sense which is not so common anymore, no real trade secrets here or anything and I am not an electrician or even close.

[@NoNORADon911]

@@TryingToDiscover2 Might as well just use doorbell wire then. Or aluminum wire. I hope I don't encounter your wiring in a house I buy.

[@timmack2415]

@@TryingToDiscover2 😂😂🤣🤣

[@4x60]

@@TryingToDiscover2 Terrible comment. So someone plugs a high watt old light or heater into your suggestion. Surely you jest.

[@USGrant21st]

As an electrician to an electrician, can you tell me if it would be a big problem wiring an EV charger to a dryer outlet?

[@JeanPierreWhite]

Another advantage of the WAGO connectors is that you can mix solid wire and stranded wire *and* be able to disconnect and reconnect if need be without compromising the stranded wire. Twisting a wire nut onto a solid and stranded wire can cut the small strands as you tighten down which reduces the wires gauge or it could totally work loose. Many smart switches or devices use stranded wire and it is tough to combine with wire nut connections. I use WAGO connectors almost exclusively now. WAGO connectors take more room than a wire nut so in a tight spot they may not make sense.

[@nothankyou5524]

If done correctly, there are no problems combining solid and stranded wire. There is a specific technique that is to be employed.

[@w.g.whitney7350]

Great video! Best part is no nonsense - just useful information. Polarity is one thing you can add. Hot to brass screws, neutral to silver screws.

[@C.Brown5150]

I've been using the back plug in's for ever. So far, I've had no problem's with doing that. But, I don't think I'll be doing that anymore. Great video and information. I appreciate you sharing this info.👍

[@sociopathmercenary]

I try to get slightly upgraded outlets that have back wiring under the side pressure plates. I find more convenient thsn fiddling with the hooks

[@LRN2DIY]

That's an excellent point. The side wiring options are excellent, like the ones at 8:50. I have found that Home Depot doesn't have a good price on them and neither does Amazon but Lowe's has by far the best deals on these. I'm considering a new video on exactly that topic because I shopped at four places to find that deal.

[@tracycapilot2002]

Ok, ok. I'm a believer. No more 'backstabbing' new outlets for me! I may even go through the house and fix those! And, yes - also guilty of counter-clockwise hooks and now I know why! The wire gauge on the back is a terrific help as well although I always thought that it was just for the proper backstab length! The screwdriver and stripper hints were awesome. Dad always said "right tool, right job". Nicely and concisely presented. Thank you LRN2DIY!

[@jasonmorehouse3756]

Absolutely nothing wrong with the backstab connection. He is just misinformed on the topic.

[@gene9230]

it is almost impossible to get anything with screw terminals in Germany, they are all push in connectors.

[@ghost307]

@@jasonmorehouse3756 NEC prohibits backstab use with any wire larger than #14. I think that says something.

[@darrendolphdragos9752]

@@ghost307 The holes in the devices prevent anything larger than #14 anyway. The unfortunate fact is, spec housing is built and wired and plumbed and roofed and sided by the lowest bidders. If it's legal and saves time, it is done. But no DIY should be concerned with the couple of minutes it takes to use the screw terminals.

[@moonbaseryan]

TIL ECX driver. These videos are wonderful and very informative, no cruft. Thanks for sharing your knowledge, man.

[@huskydigital]

Good DIY video, showing good tools & techniques. Been doing my own electrical for 40 years, and enjoyed this.

[@eagleithrustx5668]

One thing I’ve learned working in the Chicagoland area where conduit is required even in residential and therefor stranded wire is very common is twisting the exposed strands to the left (mimicking the pitch on the factory right hand twist throughout the wire) before making your hook. It keeps the strands from splaying out to a surprising degree.

[@darylboggs2917]

Did you accidentally say this backwards? If you twist the exposed strands to the left, that would be opposite of the factory right-hand twist.

[@bigsmiler5101]

I used to read the Code book before every project. Now I do only with 240-volt work BUT You still got me on a few things. Great video. Off subject but there are probably some DIYers out there who skip putting ALL connections in an electrical box. A few years ago a light switch quit working. When I took the box's plate off I was shocked at how nasty an EXPLOSION can be inside those things. A significant portion of the whole switch was VAPORIZED. That Would Have started a fire if it hadn't been in a box.

[@terrywebster9772]

I'm a handyman with thirty + years of experience, and my specialty is electrical work. I've heard about electrical fires, but never seen any evidence as you just described. Thank you for sharing. It's a very valuable lesson.

[@DLexEdition]

Explosion... If the switch was in a box... Would it be then considered a, "boom box"? Okay, bad joke!

[@Suavissimo]

Excellent! I'm sure this will help many people. Very kind of you.

[@jakecarr5140]

Thank you so much. This was so easy to understand. I'm now going to redo the outlet I installed last weekend.

[@dallas5374]

I love DIY people lol. They keep me in business 😉

[@davedawdy3949]

Journeyman electrician here. With most wire nuts you should not pre-twist the wires together. The instructions on the box don't say to twist the wires on the two brands I have here (which is to say not to do it), and I have seen some instructions expressly state NOT to twist the wires together before putting on the wire nut. You must follow the manufacturer's instructions. It is important to make sure all the the wire ends are equal and then twist on the wire nut as tight as your hands can tighten it while firmly holding the wires from twisting. Then as you showed, check each wire to see if it will pull out. Then you are done!

[@electroman982]

You are 100% correct...to add...important to make sure all the the wire ends are equally stripped 3/4" hold them and tap the ends with your kliens or your callused thumb which ever hurts less and cut them even. Use kliens if you want to caress the wife smoothly with your hands!😄 "then twist on the wire nut as tight as your hands can tighten it while firmly holding the wires from twisting."

[@SwitchingRooskies]

This is completely correct. There's no need to pre twist your wires.

[@boomer3917]

Using WAGO connecters is the better way to go in most circumstances. Less stress on the fingers and hands over time.

[@dallas5374]

You’re incorrect

[@nickm9102]

Not a professional electrician but everything I have seen says not to pre-twist wires mainly because you can twist the wires together and the wire nut may not be secured to the wires. This is part of the reason I do another questionable practice, wrapping the wire nut with electrical tape.

[@JosephCarton]

Very well done! Great camera work, clear and to the point and informative!

[@keithliermann692]

Love it! You hit all the things I learned wiring houses. We used the back wire receptacles in the 80’s. But doing home repairs in the 2000’s I was removing them because they were not good.

[@xepherys]

Excellent video. And yes, those WAGO connectors are, by far, the best way to go. They may not be as cheap as wire nuts, but they aren't very pricey and they are absolutely fantastic!

[@ThomasTrutt]

You just have to ensure they are rated properly...

[@davidcooper4385]

Wagos suck!!!!!Wire nuts are best.

[@xepherys]

@@davidcooper4385 ok, cool

[@jamesdyer7535]

also when doing the hook on the wire, we learned to use the strippers the way was showed, but with and added reverse turn making the little hook look like a question mark. makes it a lot easier to put the wires on the receptacle.

[@seandeeme]

I took an electrical in job corps and I was taught the same thing.

[@dk455diddly]

Clear, concise, straightforward and intelligent advice/instruction...what could be better? Thanks for this great video!!

[@davelundergoesunder]

This is an excellent video containing good advice and reminders to people who are DIY. Thank you for making this video.

[@David-gw2lv]

Wow, I've wired four of my homes, always passed inspections, but I never knew about ECX bits, nor did I know about the little holes in my wire strippers to form a shepard's hook, I always used needle-nosed pliers. Thanks, your video was very interesting and informative, thanks so much !

[@royrobinson4636]

Same here, David. I never knew about ECX bits 😎 I'm also happy to see the Wago connectors mentioned. I was sold on Wago a couple years ago and have a nice assortment of them for DIY home use. Great product. I only wish they made those in larger wire sizes.

[@markthompson8656]

Me too

[@deboraanderson8114]

Same story as David and 2 replies. I got to get me some Wagos and ECX bits!! Thanks Nils. Really well done.

[@KameraShy]

I think the ECX bits are relatively new.

[@davidconner-shover51]

I've got a couple of screwdrivers with those bits, but only use them for high volt the two holes actually have a different purpose; note they are two different sizes, look closer and you will see they are threaded they are to cut 6-32 and 8-32 screws down to size

[@azaleablue2261]

I am a single woman, I live in an old house. I need to install a hardwired cam & replace some outlets. Can't wait for a man to help, they usually want more than dinner, or a few bucks. Thanks for the help.

[@user-yq6fb3bc8u]

Great electrical apprenticeship knowledge video for "Do It Yourself" beginners.

[@oldager1662]

Learned about a new screwdriver tip! Thanks Nils!

[@flyurway]

Very nicely done! Happy to say that as a DIYer with no "formal" electrical training, I've never made any of those mistakes - most of it is common sense anyway. But informative. I never knew those "backstabbers" were so bad. Never used them because I was just always leary of them but always thought if they weren't okay they wouldn't be there in the first place.

[@willss6027]

Backstabs may be ok for light draw light circuits if you don't mind some flickering. Never for outlets. Appalling they allow them. I solder all high amp connections rather than use just wire nuts.

[@toriless]

Not even legal in places like Boston.

[@billwilson3665]

I'm a mechanic by trade and a diy and I'm pretty impressed with the quality of harbor freight tools. I bought a set of icon snap ring pliers and compared with to my knipex and slightly preferred the icon.the tips were cast a little more precision and the rest of the tool build was good quality.

[@DonaldDump2024]

That’s interesting. I’ve virtually stopped shopping at HF because of poor quality. Seems HF is very hit and miss on quality.

[@actionjksn]

The Icon stuff is really professional grade.

[@actionjksn]

@@DonaldDump2024 the Icon line is not cheap but it is really professional grade. I've gotten pretty good at figuring out which of the other lines are decent. Stay away from the battery stuff. The big cast iron shop tools like drill presses and stationary sanders are a good deal when you have a coupon

[@KreemieNewgatt]

Their ICON line is relatively new and is Taiwan's "A-grade" stuff; it rivals American tools like SK. I'm guessing HF saw an opportunity to get some of the "tool truck" business. I've been satisfied with every ICON tool purchase.

[@troy3456789]

@@KreemieNewgatt I'd never normally support anything HF, because it's primarily Chinese junk that helps support the CCP, but Taiwan is currently a free country and it deserves our support. Buy Taiwanese, Japanese, Korean or American without a second thought about it.

[@vincenthyland8048]

Very informative video for diy electricians. Many good reminders even for someone with electric experience. Keep up the good videos…

[@ColoRadio6996]

Glad you mentioned and demo'd WAGO connectors.

[@user-mv4it2mp6z]

Nice presentation ...no music, no BS just useful tips.

[@frankc7441]

Great video explaining how to correctly connect wiring to a receptacle but the one important thing you failed to mention was to make sure that the " Hot " and " Neutral " wires are connected to the correct terminals on the receptacle so that the polarity is correct.

[@toriless]

Who would be stupid enough to ... ... oh. never mind, idiotproofing ....

[@briansharp8612]

Like Tim Mack I am a seasoned journeyman. I appreciate your approach to show potential problems.

[@rc52]

Thank for those excellent tip's & detail's, they do make a major difference which some of us are/were not aware of!

[@ericnortan9012]

I have been using the #1 Robertson for a few years now, but with the ECX you obviously get the most torque with less chance of stripping the head. I have that 15 to 1 and have used the ECX. I'm a master electrician with 27 years in the trade.

[@rickhaubeil2049]

Surprised you didn't cover reverse polarity. That's one of the most common mistakes I have run into...

[@Viperkiller465]

AC

[@spacemissing]

AC has no polarity. Hot and neutral reversed is what I believe you meant, and yes, it is a serious and common problem. I have seen one case where hot and ground were swapped. That's SCARY.

[@beckirae100]

Oh boy, my master electrician BIL would not be happy seeing you twist the wires together. Loved see the new tool. Your always pretty straight forward, and thorough.

[@ryanmcquinn]

Glad to see someone with common sense. Great video.

[@judithruffner128]

I would suggest adding a 7th common mistake to the list. If the 2 outlets are on separate circuits, be sure to snip the factory-installed jumper wire between the outlets. Obviously, I learned this lesson the hard way!

[@srfour]

If you're a diy'er please don't put multiple circuits in the same box. Somethings are best left for professionals. That's not even a common practice the tabs more for switching half the receptacle. If you don't know what that means you should call an electrician

[@jamesmckeon1513]

I would never put 2 different circuits on the same device, especially opposite polarity.

[@nothankyou5524]

But he didn't call it 7 mistakes. He called it 6 mistakes. Which one would you have suggested he leave out. Or should he just call it Sixty Bazillion mistakes?

[@TheRoland444]

@@srfour excellent point

[@stephenhall5694]

Good video! Reminder that the “outlets” are properly called receptacles. An “outlet” is any location where a device is mounted to wiring, most commonly switches, receptacles, and luminaires (lights). Code retains a few terms that most of us would call old-fashioned

[@LRN2DIY]

True - that's why I tried to use both terms throughout the video. Most people have never called them receptacles (I usually don't) but I tried to use all the proper terminology in this video as best I could :)

[@ArnieD17]

I've always called them receptacles but then again I'm 75.

[@VROOOOOOOOOOOOOOOM]

I don't think I've ever in my life heard anyone call it anything other than an outlet.

[@arthurleino]

Thanks for this. Have replaced sockets and Switches. I will remember this!

[@johnh.johnson8518]

Excellent presentation! I just subscribed. I do have one suggestion: At ~8 minutes in, you twisted wires for splicing using a wire nut. You twisted the wires clockwise, which feels natural. HOWEVER, if you twist them COUNTER-CLOCKWISE they will form threads in the proper direction and the wire nut will be much more secure. Just sayin' 🙂

[@Rocketyt]

Righty Tighty, Lefty Lucy

[@Kevins-Philippine-Retirement]

I appreciate you mentioning the Robertson. I am a Canadian who worked in the electrical/electronics field and well as the industrial mechanical field. Most professionals as well as DIY guys in Canada would never use any other standard, and for many reasons. A property fitting high quality Robertson bit is by far the easiest to use.

[@donfrank4429]

I have done these things over the years and have learned like you the proper way , as learning is great, pigtails and the wago are nice to use with greenie wire ground nuts with a hole in the top to have a ground wire to fasten around the ground on the outlet

[@glenkelley6048]

TY for a fine review of basics!

[@dwalmop2]

As a fellow DIY'r, these are all things I have already been doing and/or using (except I guess I've never used wagos). The j-hook hole on the wire strippers is one I'm surprised more people didn't know/haven't figured out. The Klein ECX bit screwdrivers were a game changer for me, as odd as that might sound.

[@JoseMartinez-bb2qf]

Same here with the ECX

[@toriless]

I have adopted the Wago version recently. Do not trust imitations.

[@rustymarrs4832]

I'm a master electrician. This was a very good video. Especially on using the push inserts. Also not taping around an outlet before installing. Code requires this in some areas

[@renebatsch2555]

I better look up the code concerning taping the devices. Could you please tell me what section and subsection number your referring to? Are you referring to Canadian Electrical code or another nation's, American, for instance?

[@rustymarrs4832]

@@renebatsch2555 I'm American. It's not nec required, but small codes differ from city to city. I've come across a handful now who want the taping around it which to me is redundant as it might serve a helpful purpose in metal boxes, but if the boxes are grounded as they should be it's pointless anyway. My apologies for not making clear it's a local thing I've ran into several times.

[@renebatsch2555]

@@rustymarrs4832 Thank-you for the reply. I used to wrap electrical tape around the receptacles as well years ago - just as I was shown by many journeymen. I don't anymore as it makes it harder to trouble shoot if one has trouble stabbing into the slots with ones prob-tips and can't touch the side of the terminal tabs because of the tape. Also it prevents inspection of the terminals and wire ends when the device is pulled out of the box. Also the tape, if not allowed to relax before wrapping, will start to work loose and in time leave a tacky, encumbering mess. The only time I use tape now is temporarily on light switches hanging out the box when I'm painting a room and want to keep the room's light in use. p.s. I'm a 32 year member of the I.B.E.W. local 353.

[@rustymarrs4832]

@@renebatsch2555 nice and yes I agree on tape just being a Headache. The only thing I tape anymore are colors on strand wires from single rolls to mark hots from neutral and ground. I don't wire hot to neutral old school so I don't have to mark those, so colors and wire nuts after twisting hots are about it.

[@robertmaimoni8048]

Wow ! Clear, simple and direct. Thanks !

[@justinburris2888]

Great video and quickly gets to the point. Fortunately I know enough not to make these mistakes but I’ve seen plenty of wiring when replacing outlets our switches where people have made these blunders a lot.

[@toriless]

or not our

[@saschapulkowski4413]

Always Robertson for the win. 👍 I always sub out the Philips screws when I can to not leave future generations cursing if a reno happens.

[@LRN2DIY]

Agreed - they're so much easier to work with!