6” Rough Country Lift 2020 Tundra

[@miguelrivera202]

You should do a video moving your wheels left and right to see if they rub that way we can see how close your wheels are to the frame and the front fender thank you

[@paulbates2626]

Sharp truck. I can’t go this high and keep mine in the garage. 2020 double cab trd off road with 2 inch lift , stock bilstein 4600, 18 inch wheels and 32 1/2 inch ko2s

[@Abnastyify]

Nice ! That lift upgrade is killer!

[@leethomsen5206]

Nice Bro! I have an Inferno colored Crew Max going to the shop next week for the same lift but different feet.

[@yasiranzar4343]

6" Lift, 22" tires, and fender flares are nice touch but also need sportbar with LEDs and a full-front bumper guard to complete the look. Get rid of the chrome.

[@scroonie]

Maybe touch on backspacing or mods/body chops/trimming to wheel well of any to fit those tires. I got a 2015 tundra and looking to do the same thing. Truck looks nice

[@primetown956]

scroonie 1976 these wheels had a zero offset 22x10 so we didn’t do much trimming. They did do just a bit as they would rub when turning but it was minimal.

[@budcar9040]

How much tire sticks out of the fender flares??

[@jmrub06]

Looks amazing

[@pelon4374]

Beautiful truck

[@primetown956]

I’ve been meaning to get around to an update. That should be coming here in a few weeks or so.

[@SaltyINnewyorK]

How do you like this lift now that it's been awhile?

[@primetown956]

Sorry for the late response. They are still going strong! The issue I can complain about is that my alignment has to be done sooner than normal. But I think that’s the case with a lot of lifts.

[@SaltyINnewyorK]

@@primetown956 I ended up getting the lift and upgraded to the remote resi shocks and struts... love the look of it for sure

[@garyherndon6615]

Really nice truck! I have a 2020 Tundra same color but only leveled on stocks. How much was the kit and install if you don't mind me asking?

[@cameroneshleman4833]

That's clean. Should throw so traction bars on now that'd be sick

[@brettmaximo2077]

If you could do it over again would you still go with the rough country kit or wait for the bds kit brother? Just wanna see what you would do to see how I wanna do mines. Smooth truck btw bro!

[@primetown956]

Brett Maximo it’s all in the budget. If you can afford the BDS with no issues then I’d def go with the BDS because of the brand. But don’t get me wrong, this kit is flawless so far. It was affordable and made the truck look 10x better!

[@brettmaximo2077]

Quad County Productions yeah that’s exactly my downfall is budget right now. I mean I love the reviews on the bds but didn’t know if it was worth saving up for it and so far yours is the cleanest with the rough country that I seen. But how is the ride quality? Did you have to re gear?

[@brettmaximo2077]

Quad County Productions and was the kit worth the bang for your buck so far since you had it?

[@primetown956]

Brett Maximo no doubt it’s worth it.

[@mariaaguero9049]

yes I like your setup can you send me the sides rims and tires because I got a 2019 toyota tundra 1794 limited edition and what sides lift you bring it up to and yes your truck looks beautiful nice ride

[@jonathanritter7364]

So with the 6" lift, it should have came with some spacers to install too correct?

[@miguelrivera202]

Can you tell me what's the offset on your wheels and did you have to do any trimming on your front bottom plastics I see you still have it on I only 2016 1794 edition and I order everything that you want except for the wheels are different

[@jimleesur5610]

Looks killer. Looking at the same rc kit. With 35s. Any rubbing? What's your wheels and tire size and width. And offset. Thats the stance I want mine to have

[@primetown956]

Zero offset 22s on 35s. Very minor adjustments were made to keep them from rubbing.

[@bigboijohnny]

Hi, did you have to cut your passenger fender liner to mount the reservoir?

[@primetown956]

Yea some small mods were made to the front fender liners to get it to a perfect fit.

[@bigboijohnny]

@@primetown956 appreciate the quick reply. Was wondering why my passenger reservoir wasn’t fitting the same as the driver side.

[@rickysavala4316]

Nice truck brotha. I just got a 2018 and I want to lift it 6 inches and put 22x12 with 33s, I’ve heard that the TSS and the impact sensors will most likely malfunction and cause problems? Anything with your truck as far as issues with any sensors and if so what did you do to fix it. Thx brotha.

[@primetown956]

No issues whatsoever

[@rickysavala4316]

@@primetown956 awesome bro thank you I almost shit my pants after I bought it and started reading about the issues ppl are having and saying these are not liftable. Thx again brotha and nice truck.

[@luar2521]

Look beautiful

[@raymondgarcia1093]

Just picking up my truck what was cost of that kit

[@primetown956]

www.roughcountry.com/toyota-suspension-lift-kit-773c.html?gclid=CjwKCAjw77WVBhBuEiwAJ-YoJG3wfJG03b95xmakzTTJX9xHBOsE4Nfi55cygx5cDKMwtAC4Kk-9ZhoC6PgQAvD_BwE#278=6482&266=732&C135016692917&Cpla-293946777986%7Cm%7C%7C75250

[@-emme-nguyen4404]

How much was the lift and installation cost for you?

[@cj0204]

Is that a Rough Country reservoir shock?

[@joshmontoya5966]

How are your cv Axcel angles? This same lift I put on my truck and putting my cv Axcels at extreme angles

[@Max_ellis74]

Look up extended travel axles. You might be able to get them from Napa!!

[@SoSoPHAT]

Love it!

[@budcar9040]

Is the ride smoother than stock??

[@primetown956]

It’s about the same to be honest.

[@ksimms82]

Did you have to cur the front and rear cross member ?

[@caskin95]

Can you share a link for the suspension please

[@mr.h3603]

Awesome rig man 👍👍👍 Your choice of color, wheels suspensions is spot on 😍😍😍. Just wondering with the laws (Im from Australia and will be moving to Texas shortly) regarding modifcations. Is the wheels and suspension mods all legal? No insurance issues? (Sorry for all the questions, as Im a noob).

[@primetown956]

Mr. H no issues with insurance but it does void some of the extra warranties if it’s a truck the bank still owns.

[@mr.h3603]

@@primetown956 thanks for the reply 👍👍👍. Here in OZ, anything more than a 2 inch lift and 35s will cop you a defect notice. Im not too worried warranty as I will most likely be buying second hand and outright.

[@FJ_Landon]

How is it holding up, I have heard RC lifts are not worth it?

[@TheBerto4911]

Don’t you need to redo alignment now that you went from 5 to 1 ??? Just wondering ?

[@primetown956]

Roberto Arriaga correct, that was done by the shop the same day the kit was installed.

[@alsegura2052]

Which kit is this one, do you have the part number??

[@anthonyrodriguez5728]

Have you had any problems with any sencers going on since you lift the truck

[@primetown956]

Anthony Rodriguez no senser issues thank goodness.

[@anthonyrodriguez5728]

@@primetown956 how do you like the rough County set up you have? Looking at the same set up for my 2018

[@anthonyrodriguez5728]

@@primetown956 that's good to hear no problems with any of the Sensor's good on

[@santosmacias7089]

Can you do a update on the truck ride quality ?

[@primetown956]

Santos Macias still smooth! I am getting some squeaking from the sway bar on my left side but I honestly think that’s an installation issue.

[@kaydubzz]

Are those 35s or 37s?

[@Rockdaground]

What size are the tires? Looks very nice!

[@primetown956]

Rockdaground ty! They are 35x12.5 0 offset I believe!

[@X_Mason_X_6.0]

@@primetown956 those are a -18 offset. you cant get those in a zero offset because they would be hitting everything on the inside.

[@primetown956]

@@X_Mason_X_6.0 you may be right, all I know is that the gentleman who owned the shop told me it was zero offset.

[@X_Mason_X_6.0]

@@primetown956 yeah I’ll promise you it’s a -18. Your tires stick out to far for a 0 offset. Plus you have fender flares and they stick out past them. That’s a tell tell sign it has a negative offset. Good lookn truck though man.

[@UneekEntertainment1]

How much did it all cost and how is your gas mileage?

[@lindsaylindsay2627]

Can you tell me if they cut you chassis to do the installation? Is it a 4x4?

[@primetown956]

That’s a good question, it is a 4x4. I think they may have but I’ll double check.

[@MaxDissent]

How do you like the Vertex now that you've been running them for a few months?

[@primetown956]

Zachary McGrew still a very smooth ride at the 1 setting. Definitely worth it considering the price.

[@MaxDissent]

@@primetown956 Cool. Thanks for hitting me back. Cheers!

[@joegmontes316]

@@primetown956 what are the coil overs for??

[@54BuickSpecial]

How’s the ride been compared to stock?

[@primetown956]

54BuickSpecial it truly is smooth. Like a Cadillac.

[@tundramafia_2489]

@@primetown956 what are the specs of the wheels?

[@tundramafia_2489]

@@primetown956 offset sorry?

[@JustinGarciaLefty]

What size are the wheels? What is the offset?

[@demetrio_acosta]

do 2020 rc lift kits fit on 2021 tundras?

[@primetown956]

Best bet is calling them directly. The truck hasn’t changed in years so I’m sure it’ll fit but never a bad thing to double check.

[@demetrio_acosta]

Update on the lift?

[@primetown956]

Plan on making a video in the next few weeks.

[@demetrio_acosta]

@@primetown956 you can’t just tell me ?

[@primetown956]

@@demetrio_acosta lol sure, it rides great still. No issues what soever. Did you have any specific questions?

[@demetrio_acosta]

@@primetown956 yeah I did. Ordered mine still hasn’t been shipped but do you have to get an alignment everytime you change the ride setting? And do you recommend new upper control arms?

[@primetown956]

@@demetrio_acosta great question. I’m not sure on the alignment as I’ve never changed mine off the “1” setting. As far as the control arms they work smooth. Upgrading never hurts of course.

[@joegmontes316]

What are the coil overs for anyone?

[@codyyoung4226]

What I think is. You lost me at you wasn't going to do any off roading after getting the lift installed. Pavement princess is what we call them around here.

[@primetown956]

Cody Young yep that’s exactly what she is.