62 GENIUS HANDYMAN SECRETS

Hello my friends, today I have prepared for you a selection of 60 amazing ideas and secrets of the masters that will help you in your life. Thanks for watching.
Subscribe to mr. Inventor on youtube
#ideas #diy #tricks

[@coertmommsen837]

These tips are extremely handy and practical - I think all viewers should forward the video to a Handyman they know!

[@gorman1115]

Условно все идеи подобных видео можно разделить на 4 категории: 1 изобрести то, что давно уже изобрели и стоит копейки. 2 изобрести то, что по кпд близко к нулю. 3 усложнить то, что все делают более простым и быстрым способом. 4 повторить уже известное

[@paulpaule4934]

😂😂👍

[@user-ho1mo6gg3g]

5. придумать проблему и решить ее

[@coleccionlospatrones6524]

Muchas Gracias le doy con gusto un me gusta es muy interesante su aporte señor Inventor.

[@davey2k12]

Some good tools and ideas Gotta try that plastic repair with iron and nail going to try it on my bike break leaver 👍

[@yamilandres]

several times I found myself raising my eyebrows, smiling and nodding in admiration and appreciation while wtching this vid thanks fr making and sharing ;-)

[@revdupartist9386]

I never thought about a bike chain being a multi-tasker. I'm using that one. Thanks 👍🏻

[@myopinion4662]

Всё супер круто!!! Особенно понравилось крепёж деталями от цепи и паяльник-нож по пластику!!!

[@AwakenedOnes2023]

I ❤ that bike chain screwed into the wood to make a bad azz diy genius level hinge! I'm actually gonna use that idea to create a fold up table for my tiny home!!!

[@kmh997]

Chainsaw storage was infinitely valuable! I use pool noodles for all kinds of things, I'm dismayed that this never occurred to me. 😆😎✌️

[@eb3204]

Es könnte alles so einfach sein, wenn man darauf kommen würde. Einige Sachen hier werde ich auf jeden fall umsetzen. Danke dafür👍👍👍

[@InstructiveTools]

Sometimes you forget some tricks and you find others even more ingenious here, thank you very much for posting this content.

[@sunflowerisland]

Holy crap this is what youtube is really all about, useful videos like this, great tips, all of them

[@moefritz9568]

What's the great tip at 1:31?

[@sandinewton1896]

Wow, thoroughly enjoyed watching

[@KORZDAKRA]

thanks for sharing this video 💗 big nice 👍 full watch ⌚

[@BennyXV]

1:32 is to see & make sure the hole you drill goes straight. It's for balance the up and down. If the spanner go back it's mean the hole you drill go up not straight. Thanks me later

[@murfbass]

I needed that explanation. Thanks.

[@penzazvaldz2419]

gracias amigo por sus aportes; muy didácticos y prácticos, fáciles de realizar

[@SheilaSpencer1]

Some narration/explanation would have been helpful for some of these. But I do appreciate the lack of annoying music that accompany most videos like this. Thank you. I did find some very useful ideas like the chainsaw protection for stowage.

[@birdolla4441]

This is Brilliant! As a carpenter / builder / plumber/ electrician over the last 50 years I have utilized about 50% of these tricks. Most were forgotten until now, so cool to see them in one concise KZbin... along with even more creative ideas and stuff I never imagined . Thank you so much ( not sure about some of the knife sharpeners though) :)

[@marcomanduzio6893]

Vvv

[@tomsgarage4486]

Don't get a lot of follow up jobs I bet.

[@OGRH]

I'd never hire you.

[@SC.243k]

Very very beautiful, thanks for sharing my friend 👍🤩 fully watched 👌

[@omrutudhawajkadam]

Wonderful... i love all these things...

[@bingewatcher6077]

11:07 très bonne idée !

[@ltcar-lab4579]

У меня кажется IQ понизился после просмотра этого

[@MatCendana]

A VERY useful video with many tips that the ordinary person can use. Thank you!

[@user-op4fv3ef4b]

Ну ты инженер! Просто нет слов! Открывалки для банок и бутылок заслуживают отдельного внимания! Столько бесполезной и неработающей фигни я ещё не видел 😁

[@user-ho1mo6gg3g]

еще про 50 оттенков , точилок для ножей , забыл 🤣

[@user-op4fv3ef4b]

@@user-ho1mo6gg3g дрочилки для ножей😁 точилками эти приблуды назвать сложно🙄

[@Partysize2]

Great video. Moves fast, lots of good stuff. Thanks!!

[@catreader9733]

I have thought of a very few of these things myself, which makes me appreciate the others even more. What comes to mind are the nail as a drill bit, several makeshift soldering iron rests, wrapping a magnet before using it to pick up fine particles (I have used a disposable bag then turned it inside out for removal; I have also used tape), and using something odd to temporarily hold a screw onto a loose driver to start it it an awkward place (some of my choices are a bit of drinking straw, wiring insulation, or something tubular, split lengthwise for easy removal).

[@user-of5eo9oo3m]

😅

[@HUMORSHINGTON]

Muy prácticas tus ideas,👍

[@frankwaldeck2359]

Great video. Definitely putting some of these to use.

[@markmickle198]

For those who have every unusual tool and how very well but technology has come along way along way but very informative video sir..

[@sonictsunami6779]

Syntax. Use it.

[@brianfleury5935]

Nice. I made the loop a big larger and it serves as a hook remover

[@fornammefternamn6724]

omg. how will i ever be able to remember all this 👌

[@user-hv9oj6lv9w]

simply ingenious!

[@jorgemateus8707]

Obrigado!

[@nelsondebarros8079]

Parabéns pelo vídeo muito bom

[@galenocambeba]

Show de ideias. Alexania | Goias BRAZIL

[@sallymay3643]

He had some great ideas in that video 💡💡💡💡💡💡💡💡💡💡💡💡💡💡💡

[@randallmacdonald4851]

Excellent video! Thank you!

[@emanuelmifsud6754]

Thank you for 6.00 "how to rejoin a broken wire cable", very intelligent.

[@cachhomevideo1546]

Thanks for these kind of technic in working

[@resines111111]

¿Hay alguna web para exponer y concursar sobre ideas ,trucos e inventos?.Muchas gracias.

[@MarcoAntonio-ri8jh]

Correntes usada deu certo obrigado

[@bubbaramsey9777]

I’ve been a handyman fifty years. If I needed these tips, I’d become a politician.

[@Andrey_84]

Я даже не могу представить где мне может пригодиться 70% лайфхаков которые представлены на данном канале. А тидцетью процентами лайфхаков ещё наши прадеды пользовалась.

[@user-uq2yt5by7q]

Очень неплохо!

[@luisbolivar5534]

Muy buenas ideas

[@dezert5418]

да, что-то из этого может вам пригодиться, те же банки под саморезы, хотя пластиковые крышки не очень. или распорка штапика(шипа) хоть гвоздём, хоть клином, но в большинстве - это бесполезно.

[@user-hb6bm9bv5l]

Большинство так, для времяпровождения

[@franzbrunner499]

unglaublich welch gute Ideen Handwerker haben -werde mich hoffentlich daran erinnern, wenn ich mal was bastle

[@ToXiKSyK]

the cleanest , unscarred handy man hands......in the world .

[@vitaliikhodakovskyi4695]

Это первое подобное видео, где почти половина идей реально полезны! Отличное видео, спасибо!

[@TimeSurfer206]

For picking up the iron filings, I use a Zipper Sandwich Bag.

[@andreaventura4646]

Nuovo As I

[@andreaventura4646]

Nnn

[@Rob337_aka_CancelProof]

The one where he fixes the USB cable using heat shrink I've done many times and it works far better if you put a little hot glue inside of the heat shrink because it gets between any bare wires and insulates them from each other

[@jonathanwright5550]

Or you could use that heat shrink that has the goo in it

[@sonictsunami6779]

5:42 - Modified segmented blade to be used in soldering iron to melt/cut through a plastic bottle.👍🤯 8:44 - Used segmented blade to saw/cut through plastic bottle. 😏🤔🤪

[@keupondestroy911]

Merci beaucoup pour la vidéo

[@abderrezakouzandja6663]

ù ,k,k,k* n n nn;n,;n;n,;nn nn n n n ù ù ù ù ù ù ù ù ù ù ù ù ù ù ù ù ù ù ù ù ù ù ù ù ù ù ùùù ù ù ù ù ù ù

[@JustIn-op6oy]

That "sharpener" hack is going to ruin the edge on a blade and make it far more difficult to repair properly. Depending on the drill speed you might even fuck up the heat treat.

[@shanmugamv1977]

Fantastic idea.

[@suzannelecuyer298]

I just love watching you 😃 would watch for hours. I am kind of like you, I like to find a way to get a job done without bying a new tool or to fix with wath I have handy instead of trowing and buying new. I should send you some of the things I did lolll.

[@AwakenedOnes2023]

another diy queen you rock sister!

[@Her.ber.t]

boas idéias👏👏👏 Brazil watching

[@DGmaker]

Gostei bastante também. Tenho alguns vídeos parecidos no meu canal!

[@novidasetiawan4675]

Kreatif bos Q ...ramah lingkungan

[@McLusches1]

Die Tipps sind gut, aber einige zu Zeitintensiv. Z.B. das Kunststoffseil. Bis ich da einen Schrumpfschlauch drüber gestüllt habe, kann ich die Enden auch einfach mit einem Feuerzeug anbrennen und dann zusammendrücken. je nach Hornhautbeschaffenheit sogar mit den Fingern formen, ansonsten Handschuhe. Aber das Holz mit dem Nagel als Dosenöffner ist hervorragend, so wie sehr viele der Ideen. Deshalb "Daumen hoch".

[@thegreatest3303]

What was the spanner on the drill bit for?

[@bradchambers5886]

Holding it steady, I imagine.

[@edf9577]

The ring spanner hangs loose so you can see if you're drilling in horizontally or not. If you're not level the spanner slides towards or away from the drill. You don't have to hold it or anything. Just alter the drill angle until the spanner stays still and it's level. This is the only tip I already used before I saw this 👍

[@bradchambers5886]

@@edf9577 Clever. Thank you for the clarification.

[@heuerspitstop]

Scharping Knifes is his loveliest Hobby 😄👍 Nice Video, thank's for that! LG HEUERs Pit Stop 🚗 💨 💥

[@camilosilva7062]

I see this as really cool ingenuity 😎

[@its_marc]

Some good ideas there. That’ll be 1 sharp knife!

[@TheZahnputz]

i especially liked the tricks to easily dull any of your blades...

[@Domine31064]

Way Excellent!! 😀

[@DGmaker]

Very Good BOB, i make semelliant videos inspiring by Mr Inventor

[@loveitorleaveit6868]

So helpful👍

[@matchesburn]

4:06 Admittedly, this one was pretty clever. 1:32 ...? 3:04 ...? (If the hole in the wood is an issue, just use a plug...) 3:15 Please don't do this to your knives/blades. 3:22 Terrible idea. If, for whatever reason, it's accidentally turned on it will skip/jump out quite easily. Most rotary tools already come with a handle to hang it from (like Dremel). If yours doesn't... just attach something to hang it from on the cord and make sure the head of the tool isn't contacting anything. 3:27 You took more time and materials and left holes in the wood where duct tape would've sufficed. "But I don't have duct tape..." You had a knife, plastic containers and staple gun but no duct tape?

[@mack6024]

Ya había visto este video, 👍

[@DGmaker]

Muy bien

[@Ass_Burgers_Syndrome]

I like the bicycle chain hinge.

[@Matty_Joe]

Yes, it looks quite nice. I think to put it on an old wood door on a barn.

[@SBJCREATORS]

Big thumb up

[@KORZDAKRA]

always like your work 👍 and your channel 💗

[@MrCardolan]

Thanks!! Now I have my knives sharpened.

[@ayzik00gmail]

Olá... nao da pra assistir de forma correta... a tela ta dividida com uma imagem estática. É proposital?

[@marconascimento8460]

Muito top demais

[@jonassilva5460]

top mesmo

[@starmehVDV21798]

Полоска, нарисованная маркером на полипропиленовой трубе, уж слишком дорогая получается )))

[@TheBeefSlayer]

Bottle openers… I use the butt end of my bic lighter against my hand wrapped round the bottle neck and pry it off in one go. We have Ale 8-1 soft drink here with pop tops so most of us that grew up here can do it. I can use about anything that will fit under the bottle cap at all. Screw driver. Pice of pipe. Some ink pens/markers. Spoon. About anything that’s hard and makes a good lever. I have never needed a bottle opener specific tool. You just choke the top of the bottle with one hand tight and insert your implement between your fist and the cap and pry against your hand-knuckle- fulcrum.

[@jarekferenc1149]

Good and a well-known method. It works sufficiently well with the last bottle. All the previous bottles may be opened much easier: the same way, but using another bottle.

[@sterling6860]

If you need to make a dimple on a piece of metal,,to help start the drill cutting,,,,Simply put the drill in reverse it will stay in one place .

[@reperik5646]

The wrench on the drill bit. Is to see if your drilling the hole level or not.

[@Dan-qn3su]

Square, not level

[@soulshufflin6253]

@@Dan-qn3su LEVEL is right, square vertically is also right, but it wouldn't indicate square horizontally, so LEVEL is the old Indian trick 👍

[@noobbuilderproductions7865]

11:20 you don’t even need to cut it with scissors or use an insulator sleeve, just use a lighter 😭

[@TIMUR-ASKET]

superbe vidéo amigo!

[@user-ck1vf8ly5]

Я так понимаю, автора жена затюкала с тупыми ножами и он создал целый ролик как заточить их, немного разбавив другими самоделками )))))

[@user-ex8tf1nm8m]

Они в семье не умеют и банки консервные открывать.... Для такой важной процедуры , оказывается,нужен специнструмент.... Как обошлись без лобзика или болгарки?

[@TukangUlin84]

This is amazing brothers

[@Szajn_]

with every minute im getting more confused with this guys mind, he's a genius, my mind cant handle it. It's like HowToBasic, but actually (kinda) helpful

[@sethrenville798]

My guess is that he is a methamphetamine addict that is at least 5 years claims Thomas and congressing as this inventions are actually useful, and he doesn't have to get distracted every 5 minutes by compulsions to Scan, while doubling uh a 1000 miles per hour, Switching at random betwixt exactly 69 separate topics that are not even tangentially related, peer rapidly through the shades and yell at people who aren't there About how much they are not making sense, which will be the 1st and only thing said that day that Could even possibly be relevant to any of the ludicrous situations at hand

[@winstoncoelho4473]

FORD MOTOR COMPANY, THE EXCELLENT COMPANY 🇧🇷👏🇧🇷🇧🇷👏🇧🇷🇧🇷

[@TheG96]

Thật bất ngờ với những mẹo hay này

[@pofrof4910]

Now I can build the house of my dreams.

[@EDTeele]

My mind is blown!

[@SmartCraftsUSA]

Great Video. Thanks

[@rjcslagter]

Wauw brilliant! what kind of glue u use? Thankz!

[@meovatthinhan]

video clip rất hữu ích😍😍

[@Angeline-wj8jm]

Holy smokes I could do that With dry wall That's so awesome I'll look professional now by 1% I got this

[@t.d.3803]

This dude really likes sharpening knives.

[@Firesprint]

What was the wrench on the drill for?

[@soulshufflin6253]

So you can see if the drill bit is level, if not it will slide forwards or backwards 👍

[@ralfheynen8711]

Von der Wandhalterung bei 3:23 min würde ich absehen, da der Druck auf die Bürste dauerhaft zu einer Unwucht führt. Eine Unwucht bei hohen Drehzahlen lockert den Halt der eingesteckten Bohrer und Bürsten während der Nutzung- am Ende fliegt der Bohrer oder die Bürste unkontrolliert durch die Gegend. Meine Empfehlung 1. immer eine Schutzbrille tragen und 2. einen Handbohrer immer leer lagern!

[@Alex_Smert]

У автора явная проблема с заточкой ножей. 😅

[@robertgriffin662]

MacGyver would be proud!

[@Angeline-wj8jm]

I knew it All those small things that I keep collection of Are good for something I need to explore building tricks

[@user-xu8qo1xc5c]

Кто ты? Брат мистера сани походу???

[@antoniocarloscaberlon409]

muito bom Caberlon de gramado rs Brasil

[@jonassilva5460]

legal o video...jonas de americana-sp

[@GoldVP...]

That was painful to watch, only because I know many of them, but folks...these do work!!

[@zacharysherry2910]

Hey I made that drill-all thread-nut driver-wheel thing when I was a first year electrician! I thought I invented something. Maybe yet...