65 Mustang Inline 6- Part 2

[@slantsix6344]

So much cooler than the run of the mill V8

[@halleffect1]

that's gotta be the best sounding 6 (especially at idle) I've heard. almost V8-like

[@8dogsbarking]

That sounds every bit as mean as a V-8. Nice!

[@Redwood0351]

Damn!! Sounds bad ass!! Very nice job

[@TommAceAZ]

Awesome made that 6 sound like my FE390. I know that's a lot of work u have done to her and it's well worth it, nicely done. Not many mustang owners keep the 6 I'm glad U did looks and sounds amazing

[@HowToNation]

what exaust do you have on it? sounds really good. like what muffler

[@gus91343]

I went back and found that I had a Thrush Rattler muffler on it- single chamber. It did get old after a while.

[@HowToNation]

@@gus91343 how come? Too loud for daily use? And when are you going to upload an update video

[@gus91343]

@@HowToNation Yeah, the exhaust note beats you up when you daily it. I have new videos up- take a look at my other uploads.

[@phoenixblack1220]

That is pure bad ass!

[@josepzzz7760]

God... That's an orchestra

[@wahdadahi]

Damn that thing sounds awesome! Great job!

[@alexmiranda3833]

What you put to sound like that love it

[@10MinutestoRouletteFortune]

I know my baby wants that Clay Smith cam now. Sounds GREAT!!

[@gracejf1963]

damn that’s one wicked badass and it’s a fastback?

[@deannicholas3772]

Nicely done Gus. You've put a lot of time and money into a very sweet ride. Please do another vid. Maybe ridin' around town and some blasts up and down the road. Looks like it was a v8 car to begin with maybe? Big fan. Love sixers.

[@gus91343]

Thanks for the kind words! I've got another improvement coming, so I'll have some updates soon!

[@clarencepettigrew7566]

is it for sale ..?

[@gus91343]

Perhaps some day, but not yet. Too much left to do!

[@josemoya8736]

Yes...do you have a part # for that clay smith cam or where did you purchase it ....ive been looking everywhere...what lift does it have...thatx

[@McClellan71]

@@gus91343 cam part number?

[@isaacgarza7649]

nice build . working on something similar. can you provide details on the wheel size front and back 15x7 or 15x8s? and offset if possible . thanks.

[@tjstevens001]

Sweet sounding 6!

[@williegarlick5546]

Can I get a part number for flywheel and will it work with a t-5 pressure plate

[@jordanmorrow3494]

What exhaust do you have, I'm doing a similar build for my Fairmont with the i6. I like how yours sounds. I'm going with a sleeper build for mine.

[@gus91343]

Jordan Morrow its a 2.5” exhaust I made from pieces from my local auto parts store. The muffler was an oval chamber style. It was too loud and I’ve since changed to a magnaflow style muffler with fiberglass packing. Much more liveable.

[@jordanmorrow3494]

It kinda sounds like a v8

[@ericm.velasquez1434]

Could you give a run down on the electrical setup within the engine? I would like to do a heavy setup for 12v as well

[@gus91343]

What would you like to know?

[@ericm.velasquez1434]

@@gus91343 I have DUI Electronic ignition and a new complete re-wire kit for the whole car for resto mod applications from NPD. If you could describe some of the parts and pieces you used for all your electronics within the engine bay. I have had my six for about 10 year now. It is in the process for a big overhaul.

[@gustavomelendez5514]

Can you do that to my F-150 with the six cylinders 300 pls,

[@menjicar]

Awesome! Where did you get the alternator? I really need up upgrade mine.

[@gus91343]

Just a standard 94 amp 3G Ford alternator. You can get it anywhere.

[@markray4416]

Very cool Gus! I’m about to purchase my second ‘67 Mustang Convertible 200 I6 / 3 Speed Manual with all the engine mods plus T5 5 Speed swap what average MPG do you get?! Did you swap out rear end / what gears? I plan on daily driving my new rig in my hometown of San Francisco!

[@gus91343]

Sounds like a great car! I'm getting about 21-22 mpg on the highway with 3.80 rear gears in an 8" ford housing.

[@gyffjogofl7676]

I would love to hear it drive by.

[@bevanhollingsworth1201]

Gus, what are the details of your exhaust system? What mufflers are you running, what diameter of pipes, X or H pipe?? etc. your car sounds amazing. i am making some of the same modifications to mine in the near future and want it to sound very similar to yours in the end. Thanks very much

[@gus91343]

I have a 6 into 1 Scott Drake header into a single 2.5" pipe- it was going into a Thrush Rattler muffler (when I made the video) but I have since changed it to a Magna Flow muffler as the Thrush was just too loud for every day driving. It's simple and has worked well for 4 years.

[@bevanhollingsworth1201]

@@gus91343 wow thank you for such a quick reply. Gotcha. Yes it is certainly a bit much for everyday use if thats how its being used. thanks again!

[@bobwhite4344]

best sounding 200 ever??? maybe!!!

[@1k_lance]

How many fastbacks with the 200 were made?

[@gus91343]

You know, I don't know. I've been told it's rare, but who knows?

[@brandonnlynn2464]

Did you use custom pistons? What mfg, part number & oversize? Thanks.

[@gus91343]

I used cast 2.3 Ford HSC pistone 0.40 over. There are a lot of options out there: www.summitracing.com/search/part-type/pistons/make/ford/engine-size/2-3l-140/piston-material/forged-aluminum

[@demismith5789]

What electrical cooling fan did you use and where did you purchase it?

[@gus91343]

The fan I got was a SPAL unit I purchased from the Fan Man; I called them and they advised me to order an 2.05" thick SPAL unit that was only $60. It pulls 1300cfm, and has worked in hot LA traffic with my engine with no issues. the-fan-man.com/product/16-spal-low-profile-pull-type-electric-fan-s400/

[@jimenezmontasfamily8008]

How much hp and tq are you getting. I want to build an inline 6 but want to have some power too.

[@gus91343]

You know, I haven't had it to a dyno, but having put a few miles on it and having some other Mustang folks driven it as well, we all agree that it feels about the same as a stock 289, which isn't too bad!

[@jimenezmontasfamily8008]

gus91326 Thats still pretty good. I found the head and intake you have at vintage inlines. Im going to run with that same setup

[@CaptainPancakez]

more videos

[@markcarbonaro6524]

Which camshaft did you go with?

[@gus91343]

I have a Clay Smith H-6474-10-B

[@isaacgarza7649]

@@gus91343 been following your build...its awesome!. Was wondering on your cam. You said it was a 108* but under the part # you listed the 6474-0-b which is a 110. Is that the correct one?

[@gus91343]

@@isaacgarza7649 Isaac- the part number I refer to is the correct cam. Appreciate the kind words!

[@isaacgarza7649]

@@gus91343 thank you. I was a bit confused on that you said in the vid it was a 108. Looking for some options. Sounds great for it being a 110.

[@juniorflorez.9090]

Argentina manifold