6R80 Teardown

In this video, i teardown a 6R80 out of a ford pick-up, has a clogged screen. Scanning the car, i found a P0741 which i go a little into detail on this code. Problem was a blown converter. Next week i stall a transgo shift kit which is a standard rebuild procedure when doing this transmission. Thanks for watching, off to the shop today to get some work done.Please Like and Subscribe.

[@bcgjacquin]

Thank you for your educational and entertaining videos Gary 👍🏼

[@JPETTUS191]

Gary always something learned watching your videos. Thanks for taking time to do the videos . With the hassels the camera can be and time to make the videos . Thanks for the lesson

[@jpowell9343]

I just did the lead frame with no code. Mine is a 13.

[@MrBahengam]

Nice job Gery! Thank you🙏

[@rebeccariley6933]

I really love watching this and learning about this type of transmission..I just wish you could get a little closer in there!! :D

[@javieraviles6314]

Thanks for your help . Great job

[@edersonmecanicadecarro]

very good as always.

[@robmacstobz3471]

Hi Gary thanks for the best informative info I have found. Three quick questions if I could.

[@FishFind3000]

Is there any difference in this 2011 vs a 2013 f150 3.5l 4x4??? I have a 2013, I assume nothing really changed between them since it’s the same generation.

[@Indiana_Golden]

Here for some review. I had good line pressure but shuddering like a missfire.

[@FishFind3000]

For trans work would you recommend a diyer try it or just send it to a shop? This both seems complicated and simple at the same time. Also for servicing transfer cases and diffs should they be services sooner then the trans or just do everything at the same time when needed?

[@miceinoz1181]

Gary, is this pressure tap on the ZF6HP26 also?

[@FishFind3000]

Will changing the trans fluid extend the torque converter life before it will start slipping or is there nothing that can be done about that?

[@scapegoat2417]

ありがとうございます。

[@FishFind3000]

How many miles did this truck have and was it ever serviced? Also what was the longest lasting trans you ever seen before it needed rebuilt?

[@cristian6456]

because I can see that it hits in making the change to second

[@wendymeis2853]

What fixture are you using to hold the 6R80? I seem to be having a hard time finding one. Do the universals fit?

[@1993kawasaki]

is it possible to HYBRID the 6R80 internals into a 6HP26?

[@CalicoRiot]

This video helped me keep track of all my parts for disassembly and reassembly. Had to drop the trans again though, leak coming from the front. Ran a paper towel around the seals and they were dry. Only fluid appeared to be coming from the pump bolts themselves. Maybe it needs thread sealant or something. Any ideas would be helpful!

[@issaalazzabi6087]

thank you gary for sharing these precious and valuable infomation