7 Cool 3D Printed Things To Upgrade Your Desk / Gaming Setup - Printed on the Anycubic Kobra 2 Pro

Here are 7 Cool Things I 3D Printed to upgrade my desk using my @ANYCUBIC3D Kobra 2 Pro 3D Printer. Special thanks to todays video sponsor FlexiSpot Black Friday Sale has begun! Up to 60% OFF! and you can get an extra $30 off on the E7, E7 pro standing desk, and C7 ergonomic chair using my code 'FlexiSpot30''.
FlexiSpot E7 standing desk: bit.ly/3J5nakL - US
bit.ly/3Cnpekw - Canada
Check out the Anycubic Kobra 2 amzn.to/3MQ4nvS (The Kobra 2 Pro has a maximum discount of 36% during Black Friday.)
Model Links
Apple Watch charging dock - cults3d.com/en/3d-model/gadget/appl-watch-dock-vintage-mac-style/comments
Low Poly Catchall Tray - www.printables.com/model/602467-low-poly-tray-bowl-oval
Under desk drawer - www.printables.com/model/440401-under-desk-drawer/files
Alien Hand Controller Stand - www.stlflix.com/
Slide Away HeadPhone Holder - www.printables.com/model/653018-print-in-place-slide-away-headphone-holder
Magnetic HeadPhone Holder - www.printables.com/model/653023-magnetic-headphone-knob
Desk Vice - www.printables.com/model/206-table-clamp
#3dPrinting #FlexiSpot #anycubic #anycubickobra2max #anycubickobra2pro #AnycubicBlackFridayBlitz

[@durrellbowden5495]

Hey thanks for the advice. I have a Kobra Max and the Photon D2. Been super depressed lately. Now I want to go fulltime.Ready to crank it up today after work. Thanks

[@bkkorner]

Adorable,the baby computer!😍

[@ShahriarFarkhan]

Nice video, what filament were you using for these prints?

[@GummiSammi]

That retro computer watch mount is exactly like the Elagoo’s silicone mount. Been using that it for years now.

[@F.DoctorGT03.]

Merci la vidéo réussite encore une fois , les machines Anycubic fonctionne bien et font de bon print , est ce que vous comptez utilisé la p1p afin de voir ce que cela donne ? merci a vous et bonne continuation...

[@hater-vb6hl]

Can u Show ur 3D settings for the Kobra 2 Pro? I have the same but huge issues with configuration

[@tardisgirlz]

such amazing prints,. i am very much looking forward to the alien hand. good to see another Diablo player.

[@DIYToPen]

No one gonna mention that spaghetti bs on the first print?

[@thezeniOfficial]

look, if the final print is fully functional, spaghetti is not bad :D

[@FAB1150]

Shit happens, what matters is that the print didn't fail :D

[@Capyrkeys]

I bought a 3D Printer to remove clutter and make better use of the things. Some of these things are really usefull!

[@JonathanFreites]

Cool video!!!! Curious to know how do you make the timelapse?

[@cbbcsa]

How have you done that time lapse on the kobra 2 pro?

[@flightsim_clips495]

What pla did you use? The purple one for alien hand

[@DavidAshwell]

Can you post the credits for the music? That second track was catchy. Thanks

[@peter2uat]

a tip to no.2 - rub some candle wax on the sliding surfaces - they will slide way more easily

[@robertwoods2106]

I have the any cubic kobra max. I've been trying to change alot of my slicer settings. I still see lines in my print. Any chance you could help me. ? I started to use the trees for support but removing them is a giant pain and leaves marks. Please someone help me find a way to make this smooth like this video. These prints look so good and I've been messing with mine so much. I've went threw 7 or 8 1kg rolls since I've got it having fun. And trying to adjust and it looks like I'm failing after this guy's work.

[@raffaelli01]

What brand is the matte tapioca pla?

[@tackletestdummy9096]

could I ask you what camera and time lapse process you're using? I have the first anycubic kobra with a little pusher and a remote switch. I use an iPhone as a camera and what I get is nothing like what I see you produce.

[@Hanzi2u]

He never says and will never disclose that's what I've experienced

[@BlondieSL]

Nice job on those things. But what really caught my attention is just how clean the prints are! Perhaps it's just lighting or video quality, but they look super smooth. I'm not seeing obvious layer lines. I see that the printer you are using is actually on sale on Amazon. I looked at it. The only downside for me is that it's only 220x220*250. I guess that's good for most stuff, but sometimes, like today, I need to print crazy big. I'm just about to start a print of an Orchid Planter that is 320mm long. Still, perhaps a smaller printer for basic stuff would be ok, since it prints so nicely. May I ask, do you use Cura slicer with that printer?? Thanks in advance. *[UPDATE]* Ok, I looked at a bunch of reviews on this printer and most are very positive. But there are lots too, where the printer works great for a few weeks or so, then starts to act up big time. Including dragging the nozzle across the bed, scratching it! The biggest problem is the lack of support from the company that makes this printer. People are reporting that they'll open a ticket and they'll receive and email to try a few things, they do so, doesn't work, so the company responds that they'll send a new extruder assembly. But it never arrives. When people try to contact support for an update, their emails are totally ignored! So some try to open a new ticket. Only for the exact same process to happen. IGNORED. In other cases, people try to open yet another ticket, only to have it immediately closed due to "duplicate." It's 2024 and personally, I will NOT buy something from a company that has such bad (or non-existent) support. That's just rotten for the customers. I was contemplating buying a Creality K1 Max, which is pricey. But consistently, where there's any issue at all, Creality support is right there to help. When there was a mass issue with the extruder (bad design) they designed a new version of extruder that doesn't have the same problems as the old one. Any customer to contacts support about the bad extruder, is sent a new one. Then, all new machines leaving the factory after the new extruder design, all have the new extruder. That's support! So no Kobra for me!

[@NutzinHutz3D]

HAHA great prints

[@djhairychest]

hi for those supports which slicer do you use? thanks

[@T_Edits393]

mainly cura

[@T_Edits393]

well i use cura for the tree ones and the scaffolding like ones

[@dawideqqyoutube7903]

support settings?

[@user-qc1xs4xd8l]

How the heck are you print so good on this ? My elegoo is giving me headaches.....

[@ClarkyMalarky]

What you print when you first get a 3d printer 😂

[@yrrhero]

@2:40 what cad function are you using to get the 3d text that way?

[@skylerdeans6054]

Maybe it is revolved?

[@WillianDSantos]

how you can do this timelapse without the hothead in scene?

[@DukeDudeston]

I think you can put in a custom command in the gcode to move it out of the way each layer and move the bed forward. This will of course take longer to print and could also cause more issues than its probably worth.

[@LampDoesVideogame]

There is an honest non-zero amount of irony in showing off Ikea Skadis pegboards all throughout your video creating more desk cluttery "space saving" prints, that franky also used far more filament than skadis accessories or honeycomb walls or any other number of wall storage solution would.

[@jc507]

What slicer and profile do you use?

[@GargoyleDrones]

Sun faded? You mean nicotine stained. Lol

[@user-qv4fo6xp2w]

тиски крутые

[@DukeNukem424]

Hey can you 3d print the bread monater from tf2 and , yknow, send it to me😊

[@crashnation1]

That first one is going to scratch the watch so bad 💀💀

[@MGMutt]

No because the glass is harder than the plastic.

[@crashnation1]

@@MGMutt if your finger nails can scratch it so can your rough plastic

[@MGMutt]

@@crashnation1 wtf are your fingernails made of, never once hear of them scratching a screen

[@crashnation1]

@@MGMutt let’s just say a 3d printed case did not end well for my phone

[@EddoWagt]

@@MGMutt Until there is a grain of sand on your screen and it gets rubbed all over the place...

[@vidsurfer0725]

That design for the sponsored desk is not sturdy for anything like. Bambulab...just letting y'all know based on experience.

[@WildRoseBuilds]

Did you assemble it correctly? Mine have been extremely sturdy.

[@kennethd2412]

💀

[@ZedLeppelin1989]

"Desk clutter is a common problem" *literally prints a bunch of garbage for your desk*

[@papercutz100]

my bottom layers on rafts look like shit

[@frankhovis]

Try printing something other than a raft.

[@retrobuzz64]

Most of these are just more 3d printed clutter.

[@bernardtarver]

Preach!

[@Hanzi2u]

I feel like most files are nowadays

[@calummcclelland3360]

The drawer has come in useful for me, though if i had the tools available would've been easier out of wood

[@Hanzi2u]

@calummcclelland3360 ye I did print the drawer one , it was to annoying , I just used the organisation space I had made for my printer stuff instead

[@ImNotPalmer]

That’s what 3d printing is for

[@tankycatcool63]

YOU RUINED MY BED WITH YOUR TUNING VIDERO THANKS ALOT!?!?!?!!!!!!!!!!!!!!!!!!!!!

[@shigeokageyama0]

?