7 Segment Display Counter 0 to 9 using 4026 IC by INVENTIVE TECHNICAL SUPPORT

[@prizmik]

Amazing, thank you, great content for my who is learning this myself

[@its015]

Thank You so much 🤗🤗

[@djbagasina1564]

​@@its015Hi sir what do you think of logic gates has been used on that?

[@KartikPatel-nt4ff]

😅😅😅😅😅well information good show 😅😅😅

[@its015]

Thank You 🙏🙏

[@dantsrmd7852]

hello sir, is it possible to use a switch that can like activate and starts counting and then you can pause it while the other switch is only for reset. i am making a stopwatch and not sure what kind of switch and other components i should use.

[@its015]

I'll upload a video about Stopwatch.

[@djbagasina1564]

Hi sir what do you think of logic gates has been used on that?

[@its015]

Here I have not used any external logic gates. Everything that has logic gates is internal.

[@FabioFranca87]

Hi, Is there any other IC that can be used with the 4026 to make up/down?

[@its015]

No sir, there is no any IC that can be used with the 4026 to make up/down counter. 4026 IC is only for Up Counter. But there is another IC that can be used to Up/Down Counter. I'll Upload a video. Please Subscribe to my channel for this type of Information about Electronics and Electrical

[@savageboyja]

are you have truth table for this

[@corradotrigilia6989]

can you make a version with only a button and no led? excatly something that with one single button can increment 7 segment display by 1 and when arrive to 9 so start to 0

[@its015]

Ok 👍

[@shaynedeguia6963]

Can I use LDR instead oof switch with this?

[@its015]

Yes, you can use LDR instead of switch.

[@jozefnovak7750]

Thank you very much!

[@its015]

Welcome 🤗

[@tony42hajdu]

this is 70s years technology

[@its015]

I know, but it's the basics that never change. 🤗 Thank You 🙏🙏😊😊

[@สุทินด้วงสวัสดิ์]

Very good

[@its015]

Thank you

[@savageboyja]

can i use battery with 4.5v ?

[@its015]

Yes, you can use but above 5 volts will work fine.

[@savageboyja]

@@its015 bro right now i connected with battery 4.5 v its work for led but not working for 7 segment i should use with battery 9v right? but i connected like you just diff battery what you think about it?

[@its015]

You can Use 9 Volt HW Battery.

[@Sickindian5]

How to drive decimal point so it turns off on 10??

[@its015]

I think it's not Possible without Microcontroller.

[@mbah_kober]

My goal : make digital stopwatch with this scemativ

[@its015]

Stopwatch Circuit is already Available in this Channel. Link - kzbin.info/www/bejne/jWXJpJeshrp9e9ksi=nrjfbbOePdC0N_wc

[@jhititup]

can u get it to count down, too?

[@its015]

The CD 4026 IC is commonly used as a decimal counter, and it can count only Up Count. I'll upload a video about Up and Down Counter.

[@jumbo999614]

how to make 2-digit for displaying 12-hour clock? (0 to 12)

[@its015]

I will upload a video about 12 hour countour

[@jhititup]

can u make it count down too?

[@its015]

Yah. I'll

[@andrianpratama6069]

sir, can you show me to make a 4-digit digital counter?

[@its015]

Ok sir ji, I'll upload a video about 4 digit digital counter

[@andrianpratama6069]

@@its015 OK, thank you, sir.. please guide me with the schematic, sir

[@electronicdiy1120]

Is there is possible to reset as a downcounter

[@its015]

No 4026 IC is only for UP Counter

[@olsihack]

can it be done with two 4026?

[@its015]

@@olsihack Yes, Counting from 00 to 99 can be done using two 4026 IC

[@warsidchanel3945]

mantapp

[@김창환-s8k]

auto counter 기능이 없는 게 아쉽네.

[@its015]

kzbin.info/www/bejne/Z5K0Yalsar-kbKc Auto Counter function.

[@DilankaDinushan]

3v denna barida

[@its015]

I can't Understand what you mean 🤔

[@ljsuanzamora7171]

not working

[@its015]

what type of problem are you facing 🤔

[@sreelakshmik6394]

It is not working

[@its015]

This is not supposed to happen. Please recheck.

[@sreelakshmik6394]

​@@its015 my ic is 846PR7KE4 cd4026 ic is it the prblm?

[@sreelakshmik6394]

​@@its015Plz reply fast

[@its015]

@@sreelakshmik6394 CD4026 is Correct IC.

[@its015]

IC pin 16, and 3 goes to VCC And IC Pin 15, 8 and 2 goes to Ground. A PullDown Resistor connect to IC pin 1. Resistor value 10 to 100 Kilo Ohm