$70 Hart 6 1/2 circular saw with a 4ah battery unboxing/test

[@mictreful]

Got one used it to construct a deck in my back yard and bought the ohther tools the drills jigsaw love how they work no complaints

[@ManCaverTools]

I am glad to hear the Hart line is fitting your needs and I thank you for viewing Micheal

[@TaintedMojo]

I’ve found that spraying a blade with wd40 helps keeping it from being bound up in the wood. A lesson I learned working in à lumberyard.

[@ManCaverTools]

very good and I thank you for the info

[@matthewjbauer1990]

I thought I was the only one who sprayed WD40 (Should really use something else but that is the only oil I keep in the shed) on the blade because saws can bind. I can't find any video of a pro doing that or even suggesting it though.

[@viperstrike3827]

@@matthewjbauer1990 I would do it in a lumberyard like TaintedMojo, but I would not want WD-40 on my house!

[@pascualsolorzano5792]

I really like your video cause they are budget friendly and knowledgeable, I would like to see a video of which ones not to buy.

[@ManCaverTools]

I thank you Pascual

[@ourmathew]

I like the way it blows the saw dust down and not up towards your face.

[@ManCaverTools]

its a nice to have in a circular saw and thank you for pointing that out :)

[@Greenhelix5]

I appreciate you making these. As a diy'er I will be getting a combo kit of this brand. Keep up the good work!

[@ManCaverTools]

I do suggest get some brushless ones as well and I thank you Greenhelix

[@trace4125]

Man you know if you just hold out a little while you can go to Lowe’s and in my area you can get the brushless non xr desalt drill driver/impact combo for 150 which if I’m right is less than the hart stuff which is bulkier and lesser quality

[@ajgreen868]

@@trace4125 always go brushless. Dewalt brushed tools are junk

[@TheMattsjeepsrt8]

I have almost every Brushless 20v and Brushless 40v tools from HART and LOVE them all

[@michaelc7283]

Hi, Pretty nice Hart circular saw. I hope DeWalt comes out with a new version of their 6 1/2 circular saw in 2020. Needs to have a Brushless Motor, Rafter Hook and Led light. I have both dewalt brush version and the milwaukee brushless 6 1/2" circular saw. I do find myself picking up the milwaukee more. Thanks for the video

[@ManCaverTools]

I thank you strand it would be nice if they came out with one soon

[@dylanwhite6539]

I believe the most appropriate way to say the battery difference is the 4 amp unlocks more power

[@ManCaverTools]

the hight ah in batteries allows the tool to use more of the power that is already there

[@matthewjbauer1990]

I like TTI. I prefer Ryobi though because there is something about a Ryobi tool that when you pick it up, you feel like you know you trust the tool (you know the feeling). I don't have that feeling with Hart, and probably never will. As for 6 1/2 blades, although you could probably get them at Walmart, 7 1/4 are the standard size. You won't necessarily pay more for a 6 1/2 blade, you will get a better blade by going with a better saw and using a higher quality but cheaper (in comparison) 7 1/4 blade.

[@GOLFNBADSTYLE]

Crazy question at the 636 mark what are you using to close the shavings away? What is that tool?

[@norbkowa]

It looks almost exacly like Ryobi brushless saw. Same locking button location, allen key just different battery and color.

[@ManCaverTools]

some versus videos coming soon

[@Syphyllchris]

Made by the same company

[@jellyg.8961]

Made by the same company and Im sure in the same factory.

[@christopherpartridge746]

Hart is made by the same company as ryobi

[@thomasmorse6692]

I think you are the only one reviewing Hart right now. This wasn't brushless? Saw you do the brushless drill. Pretty nice. Look forward to seeing more.

[@ManCaverTools]

I cant wait fo the brushless impact driver and thank you

[@cnkilts]

Nice review. This would work for me around the house.

[@ManCaverTools]

I thank you for viewing Chris

[@Sodisna]

I think, I think you got enough tools, man.

[@ManCaverTools]

lol never have enough tools

[@kxngbtmn82500]

Can’t ever have enough

[@DamionJR4923]

Man I am jealous of your tool collection!

[@ManCaverTools]

Its all for the channel, and thank you sir

[@dickflinghammer58]

It seems to be a pre-brushless Ryobi. I do high end cabinet installs and cut a lot of prefinished panel products. I basically use a thick sheet of 4x8 styrofoam as a cut table and cut my material upside down with a straight edge. I have and old blue Ryobi cordless circ saw I got from a pawn shop for 20 bucks. Like new and with a Diablo blade it cuts flawlessly. Even materials prone to chip cut easily even on a 45. If was making decks or need greater depth of cut or something I need a real saw but for my use they do little more and the quality of cut is no better. And when it goes no worries.

[@ManCaverTools]

Hart is for the Diyer that works on stuff once in a while. Not for a Diyer that is always working on stuff

[@keshmo12]

That's kinda disappointing that it stops sometimes in the cut. I got the Ridgid brushless one and it will do 2.5 inch rips in a piece of wet hemlock. Nice test though!

[@ManCaverTools]

correct, you cant push too hard on it or it will stop on a long cut

[@Peyton-rv1qe]

When I first used mine I it would stop sometime. I realized I was not holding the blue secondary safety button in completely. It will not run by simply pulling trigger. Blue button must be held in as well as trigger. Takes a little getting use to it.

[@KingCuba0731]

can you make hart vs ryobi circular saw video comparison

[@ManCaverTools]

yes I can and I thank you for viewing Filthy

[@KingCuba0731]

@@ManCaverTools I don't believe that hart is on the same level as Ryobi I refuse to believe that be. Thanks

[@karzygijose]

Wonder how the cheap version of the ryobi circular saw does. Ryobi was my first kit. And well it sucked and well I moved to makita now Milwaukee

[@ManCaverTools]

very good

[@SouthFLTools]

Great video! How do you like it compared to the Ryobi 6 1/2 inch circular saw? It’s the same saw right?

[@ManCaverTools]

id stick with Ryobi. it feels more natural in the hand

[@EverettDiego]

I'd like to know which saw performs best dollar for dollar, for the DIYer, Home Owner Across ALL TTI Built Brands. Whats the chance of getting THAT Video done???

[@ManCaverTools]

that kind of video will be held in the future and I thank you Everett for viewing

[@EverettDiego]

@@ManCaverTools FYI, I inherited my dads power tools (Ryobi) upon his passing a few years back. Really curious as to how their 18v tools do against 20v tools.

[@jo9732]

How would this compare with the equivalent ryobi. I’m worried hart batteries won’t be around in ten years.

[@devin1820ify]

So I have the 7 1/4 saw and I put the blade on. And it's just clicking Blade won't turn

[@Throttle.Junki3]

I need that set up

[@ManCaverTools]

I thank you for viewing Low

[@toolhead147]

Great DIY saw, most of the cuts it should be ok. For someone that does more frequent DIY or contractor need a better one.

[@ManCaverTools]

I agree. this is not a contract grade saw, great for the Dryer though

[@GodGunsGills]

I have the Milwaukee fuel 7 1/4 circular saw, and I just bought all the hart 20v tools with 5 of the 4 amp batteries. Honestly, I could build a deck with my Hart tools the same way I could with my Milwaukee. Only tools that have to be top brand are the impact and drill driver! I tell no lies!

[@MalosGarage]

Thunder Up 405 exactly !!!

[@jennifersmith8900]

so is it normal for the battery to get hot while charging? i just got this! and i got it at 50 because of a screw up at walmart and a really nice manager! i was so happy to see this review, right now lol. what blade should i get? i will get one next week

[@ManCaverTools]

yes. almost all batteries get heated while charging. that's why bigger chargers have fans in them

[@robinjohnston3132]

How the devil do you put the vacuum attachment on. I highly doubt I use it but I can’t figure out how to even attach it.

[@pointedspider]

Correction...the 4ah battery does give more power. It can output twice as much current, which in the electrical match, means more power...in watts!

[@ManCaverTools]

pointedspider I was talking about the bolts though. Because of the expression 20v is 20v. But I thank you for viewing :)

[@MessalineApghar]

@@ManCaverTools even at the same voltage the number of cell stacks matter. Its like comparing a 440 4bbl vs a 440 6-pack. They're both running air and pump gas.. In the car Youre limited by the speed the air and fuel flow.. In the battery youre limited by the discharge rate. In lithium thats represented in C values. 30c can discharge and charge faster than 25c. 2 30c in parallel are about 60c. Thats why. ( using ryobi as example) 2 stack and 3 stack battery packs work better than the single stack slim batteries ( with the exception of the 3ah Slim which is almost as high as a 2 stack pack)

[@bernardzhang1886]

Hi, what is your view of wearing gloves whilst working with saws. I have heard that it is more dangerous to wear gloves when using rotating power tools. Given that harmful chemicals arent invovled Thanks in advance

[@ManCaverTools]

wearing gloves sucks while working with tools. but id rather be safe than sorry

[@bernardzhang1886]

Ryobi Man Caver what do you mean by ‘safe’. I mean it’s more dangerous because you could get the glove caught into the blade. Generally I think people avoid wearing gloves when using power tools.

[@hannahmay5461]

@@bernardzhang1886 its unlikely that a glove will get caught in a saw, it will probably just cut straight through, either way, keep your hands away from the blade, tho that's common sense

[@joshuasteele5108]

Picked one up in walmart the other day along with a few other hart tools to get a feel for them. Honestly the old hyper tough line felt better constructed. That hart drill has a cheap plastic chuck and the hyper tough had a all metal chuck. For 70 bucks I'd rather get a corded saw that has decent build quality.

[@ManCaverTools]

the brushless Hart drill did a fantastic job and way better then the brushed model

[@joshuasteele5108]

@@ManCaverTools good to hear, im basing my opinions off of in the hand feel alone so i don't have the whole story.

[@ckcuev]

great job. good tools

[@ManCaverTools]

Thank you sir

[@GodGunsGills]

It cuts like butter

[@ManCaverTools]

very good and thank you Thunder

[@GodGunsGills]

@@ManCaverTools you're welcome bro.

[@chriss4365]

How does it do on angle cuts do 45s come out good?

[@ManCaverTools]

I havent used this saw since this video. I dont really use brushed tools anymore.

[@chriss4365]

@@ManCaverTools what does that have to do with anything brused and brushless cut wood the same if their the same type of saw.

[@alvareza3]

Hart is made by TTI I think right. You think that's why they are trying to butter you up to help grow that brand??

[@ManCaverTools]

regardless if I get tools for free if the tool fails I will say it will and advise everyone that its a crappy tool. like I say in the video time will tell. I said in a previous video that a certain ryobi drill sucks because it majorly smoked during the test.

[@alvareza3]

Ryobi Man Caver I'm not trying to imply that they are are buying your vote or that you would ever give a dishonest review. Im saying that they must respect your reviews and love for their Ryobi brand and so if you do a great job with one. It makes sense to try and swing you to their new one.

[@tankscrittersandurbanhomes5579]

I watched a video of hart demoing their tools. They acted so proud of them 😆. Acted like they were performing 👍. Acted like they were so powerful. It was hilarious. You knew the guy was thinking pieces of shit the whole time. I couldn't act that well.

[@ManCaverTools]

I don't play out brands, Hart is good for a DIYER that doesn't do that much.. Hart isnt bad but its not great either

[@tankscrittersandurbanhomes5579]

@@ManCaverTools have you tried any hand tools yet of theirs? I actually haven't seen a single wrench they produce aside of adjustable. No combinations at all. Have you seen any?

[@Hgv-o8e]

Honestly their 10” miter saw and impact are plenty powerful. They have weak spots in their lineup for sure, but there’s some solid tools for the price as well

[@matthewjbauer1990]

If you only plan on using your Hart tools less than 10 times a year, then these may be OK for you. If any of those 10 times could stress the tool (like long usage sessions or cutting or drilling through really hard wood) then get something else as you don't wanna unknowingly cause excessive wear on your tools using above their capability without knowing. And some tasks most people might think a tool should do, Hart tools shouldn't do.

[@crystaldavis6169]

If your impressed with Ryobi your expectations aren’t very high. Mine kept leaving me high and dry on the job site so I got rid of my ryobi crap.

[@ManCaverTools]

My expectations are the tools surviving the their first video, If the tool smokes on its first test, its crap, I own a few HILTI tools so my expectations are high and I thank you so much for viewing

[@crystaldavis6169]

Man Caver Tools I didn’t mean any disrespect. You do a good job on your channel.

[@vernongraham363]

Any chance of a review on the Hart shop vac

[@ManCaverTools]

I can try to get it in the future.

[@vernongraham363]

@@ManCaverTools thanks keep up the good work bro.

[@Tourlock]

I would avoid the cordless hand vac from hart it sucks. The other tools seem fine

[@micjubba709]

Just got a dhs680z its a beast the blade isnt very good tho that it comes with cuts are bad all chewed up was only 130 pounds tho gonna get a Diablo blade for it # vcg construction did tests with them blades thier awesome

[@ManCaverTools]

very good, and I thank you for viewing Mic

[@alekseysurname]

Interesting video, thanks!)

[@ManCaverTools]

Thank you sir

[@bjornyesterday2562]

I have ordered a more teeth blade

[@ManCaverTools]

good, 24 teeth are not enough and thank you for viewing sir

[@mathieucorneau5017]

I have a ryobi 6 1/2 inch circular saw and it looks the exact same

[@ManCaverTools]

it is made by the same company

[@danielvelezdiaz5851]

Well,blades other than the standard size(7 1/4) are difficult to find,and expensive.that's why i stick to the standards.Best part,these saws are made for righthanded like me,since blade it's on left side,not right side,as corded ones.

[@ManCaverTools]

companies do make a left and right battery circular saw. I made a video on it as well

[@davidwaite7554]

It would be a very good instructional video about why saw blades come with a different number of teeth and kerf. There are a lot of your viewers who are Diyer's and don't know why you would need a different blade for different materials. ( Diablo may send you free blades )

[@ManCaverTools]

that video is coming and a video is coming soon about left and right blade circular saws :) and thank you sir

[@jhsplaya]

Compare this to the dewalt cordless circular saw

[@ManCaverTools]

versus videos are coming up on all brands of the circular saw

[@DanielGomez-cf6vk]

I’ll stick with my ryobi 6 1/2 still going strong and use diablo blades and hp batteries it’s a so so beastly saw

[@ManCaverTools]

I still love Ryobi, a versus video is coming up

[@camcrowley5595]

Mine keeps stopping halfway through a 2 by 6, even with a full battery. Why is this?

[@jesterraj]

How about the Skil pwrcore 12v brushles cir saw?

[@ManCaverTools]

more tools will acquired in the future and thank you sir

[@MrHowieZ1973]

That plastic blade guard killed it for me. My 200 pound gorillas would kill that saw in a day.

[@ManCaverTools]

It would be nice if it was metal. and thank you sir

[@lordrichard8184]

That was a good test. I really like how you did the long rip cut. With the 2ah battery the hart saw performs similar to the hyper tough circular saw. I’m hoping with a larger battery to see a similar increase in performance. I was looking yesterday and noticed hyper tough is releasing a new 40v battery powered lawn mower. That comes with 2 - 20v 4ah batteries. I’m hoping they’ll release the batteries as a stand alone item. And Walmart will bring some of the out of stock items back. It seems like they put a bunch of money into hyper tough. So Hart didn’t kill it. With better marketing Hyper tough could take on black and decker. If you wanna barrow my hyper tough circular saw, 2.5 ah batteries and a fast charger. Let me know.

[@ManCaverTools]

Versus videos are coming up soon and thank you sir

[@sydfinkklea666]

9

[@phillipboudreaux1160]

Your tool collection looked like me BEFORE MY DIVORCE 🤦🏽😪

[@ckcuev]

i feel for you. i had a great tool collection before my divorce. i'm remarried again and have built up collection way much better than it was before. just hang in there. you can rebuild what you've lost.

[@ManCaverTools]

Thank you sir

[@julsc2106]

Its cheaper to keep her

[@FIinchfree]

👍

[@ManCaverTools]

Thank you sir

[@Roboticwurm]

Does everyone in the KZbin tool category wear a VCG construction hoodie? Is this a mandatory uniform?

[@ManCaverTools]

lol, I use it to work in the shop, I will be getting my own brand hoodie soon and shirts soon :)

[@avdltd]

just what the world doesn't need. An even cheaper and crappier Ryobi.

[@ManCaverTools]

I think its perfect for a DIYER. there is no issues with it, are there better saws out there? yes there is, by a long shot, but that doesn't mean this a a crapy tool for the DIYER

[@avdltd]

@@ManCaverTools with all due respect, a crappy tool is no less so if used by a diy.

[@ManCaverTools]

I just did a HILTI versus Milwaukee video, the Milwaukee lost. Does that mean Milwaukee is a crappy tool now? The Milwaukee even had a High Output battery and the HILTI did not have a special battery and the Milwaukee still lost

[@MessalineApghar]

Compare it to the eyobi brushed 6" saw

[@ManCaverTools]

I plan too and thank you

[@bob3783]

Dang I thought the PrueCrew channel was going to get a shout out. Guess not. Bummer

[@ManCaverTools]

more videos are coming I am sorry I haven given you a shoutout soon enough, sorry but that's sounding a little rude.

[@bob3783]

@@ManCaverTools sorry if it sounded rude. Wasn't try to be rude. Keep them coming I watch everyone. Be blessed.

[@goldenentmerch364]

So I can’t cut metal with it ?

[@ManCaverTools]

I would not advice it. id use a metal cutting saw for that. but technically you can with the metal cutting blade but it is not advised

[@BGee720]

I thought you weren't supposed to use gloves with saws

[@ManCaverTools]

I thank you for viewing :)

[@Esdeath_0001]

#DoItWithHart #Verydrunkgang

[@ManCaverTools]

lol

[@willianalejandrosanchez2141]

Me gustaría pero prefiero la de,7.1/4

[@eduardogomez4673]

give something for loyal subscribers.👍Guatemala present...

[@ManCaverTools]

I am having a raffle coming soon. and thank you for reminding me :) like I said I listen to my veiwers

[@eduardogomez4673]

@@ManCaverTools 👍👍👍

[@maxfax319]

Man , honestly you need to learn how to correctly use a circuit saw, otherwise you can easily loose couple fingers on your hand and your Milwaukee gloves won’t protect you.

[@muscleman369]

If you can buy a power tool at Walmart, then it's JUNK!

[@ManCaverTools]

Its made by TTI, sold at Walmart, not made by them

[@Smokinstrainstation88]

All cordless circular saws are junk

[@ManCaverTools]

I disagree with that. but I thank you for viewing Taylor