70's Martins - Heating, Clamping, Guarding and Gluing

[@wxguy84]

I sincerely appreciate the history and background you narrate at the beginning if each of your videos. Thank you

[@bigtoelittlefinger6133]

Dito

[@miaoupha2370]

I agree its always super interesting.

[@markviereck4547]

I live about two hours from the Martin factory. Every repair I’ve ever needed I brought my guitar there and they repaired it for free.. it usually takes about six weeks. They are the best when it comes to customer service.. always took a free tour every visit. It is an awesome experience.. the smell is amazing..

[@gryzew]

You recreating Dave's heat press was a surprisingly exctiting crossover to see for somebody who watches both channels.

[@frankcarter6427]

yeah, me too -I'm worried about his back

[@peedubya7799]

@@frankcarter6427 bought me some stickes to help out. daves the best

[@TheGeniuschrist]

Me Too!

[@halvach1998]

Good to see Ted dispelling mysticism with some math

[@wingracer1614]

As soon as he started talking about neck heating I thought "just call Dave" and wouldn't you know, he did.

[@Mopopolis]

Oh hey! it's good to see Dave's heatpress design making the rounds

[@doctoribanez]

Learned more about Martin in the first ten minutes than I have learned in my whole life

[@stevedimebag]

I’m been lying in my hospital bed since yesterday after breaking my leg. I have been waiting for this!!!! Thanks Ted for providing my favourite weekly entertainment slot. ❤️

[@MarkMcCluney]

I sympathize Steve. I hurt my knee badly during the summer and boy, did that hold up production. God bless you mate and get well soon.

[@twoodfrd]

Mend quick! I broke my knee at one point. Using crutches will build your upper body strength!

[@stevedimebag]

@@twoodfrd thanks Ted.

[@jbarnhart2653]

@@twoodfrd 15:05 . The holes? Not a luthier, done some work on guitars, lots of work on antiques, so if I'm wrong it's not technique, it's how they build them. The holes are through the varnish and into the wood. Then glue was applied over varnish? The "689" was. Unless you remove the varnish OR drill holes, the glue might not stick. The entire cavity seems to have that problem. If the manufacturing process (no holes) led to loose necks, an easy way to get more "purchase" (a hold or position on something for applying power advantageously, or the advantage gained by such application) for the glue quickly would be to drill a few small holes or divots. Kind of like dowelling with no dowel. I've done this and used a rasp to get the same result. More surface area. Looks like a fight between the "finish" and "final assembly" departments...

[@zapa1pnt]

@@jbarnhart2653: No finish is applied to the inside of the neck joint, nor to the butt end, of the neck. Also, no glue is applied to the back wall of the mortise, only to the sides and only to the sides, of the neck tenon. The butt of the tenon does not contact the back of the mortise.

[@kennogawa6638]

The first Martin with the tortoise shell guard sounded phenomenal.

[@nixielee]

Yeah, huge difference

[@picksalot1]

I like working on my guitars myself, and your videos have been extremely helpful in diagnosing and understanding the problems, various solutions, and making tools myself to help get the job done. Thanks!

[@johnhicks7057]

As an original owner of a 1970 D-35 this was a great video. I’ve been blessed that my guitar is in wonderful shape. The pick guard did curl and was replaced. No neck reset (yet) but replaced the bridge plate. The action is good. Thank you again for ALL your videos. I’m not a luthier, just a player, but enjoy how you narrate and explain as you go along. 👍

[@brianj9533]

The 1st Martin at the end sounded magical!

[@3373-g8z]

As a kid in the 70s, I randomly happened upon several acoustic players, so playing acoustic always reminds me of the 70s. So much ridiculously great music at the time, acoustic or otherwise.

[@kevinohalloran7164]

Yeah, and me just beginning to learn about Martins in 1974. Right away knew about the D-18 & D-35, but was intrigued by the mysterious D-28. Got one 28 years later, with an adjustable truss rod, thank goodness!

[@markmetternich7629]

Love your videos! I’ve never played a Martin that I liked. 😮

[@rickbaker4571]

Dave is a super smart guy... good to see the guys in Canuckistan kickin' butt. : )

[@fredschaves]

Living in Portugal, these videos are uploaded at night time and not knowing if they're posted on Saturday or Sunday is a Christmas-like surprise for me. Thank you as always Ted!

[@guycalleddave]

I really needed this right now. Thank you.

[@JM-ym8mm]

I seriously feel this is the luthier version of "this old tony". Love the humor of both you guys :D

[@joenoneofyourbusiness6487]

Brazilian rosewood (what i call bazzillion rosewood) will smell like roses when you scratch and sniff. The foam cutters are a brilliant idea! Now we can just make cappuccino!

[@murraywagnon1841]

I owned a Martin D18-S that I bought new in 1970 and a couple of Martins that I bought new in 1972 (D-28 and D-35), and they are still unbelievably great guitars. Luck of the draw. 🙂

[@beytone]

Beautiful repairs, care, educative and relaxing talking, nice sounding guitars despite being made in the dark era. I love your videos Ted!

[@kendavis8046]

Not a guitar tech here at all, but I've got an HD-28 manufactured in the early 20-teens. I love the guitar. But after having it professionally set up when I bought it, I began getting some fret buzz three years into the ownership experience. Thanks to folks like you, Dave's World of Fun Stuff, and a couple of other channels, I was not worried about adjusting the truss rod. (Thanks to ALL of you!) Had to order a ridiculously overpriced truss rod wrench from Martin, but it took all of releasing string tension, about a little more than 1/4 turn on the rod, and it continues to play like a dream 5 or 6 years later. AND I still have the tool when I inevitably have to adjust it in the future.

[@anthonyb5279]

Very nice work! I use those neodymium magnets too! OUCH!!!!! I have learned to be carful.

[@brd400]

I put several layers of painters tape around them and it calms them down pretty well

[@cybersectech3171]

Nothing better then watching your video in the morning with a fresh cup of coffee, thanks!

[@jltrem]

When you mentioned that you didn't have a neck heat press the first thing I thought of was Dave Reaume's answer. And you did too.

[@OGSontar]

I really enjoy your videos. There's something quite calming about watching a master craftsman at work. I can almost smell the different woods as you shape them for your various jobs. I'm very glad to have found your channel, and I'm almost caught up with your past videos. Thanks for sharing with us.

[@markbernier8434]

Thank you. That heated bar stock is a great idea.

[@alonmo9]

Great video The history part at the beginning of the video is so necessary when it comes to Martin Thanks

[@PMofKhanadah]

Great episode Ted. Love the Dave shout out. You and He are two of my favourite Canuckian doods. I often contemplate moving down your way just to be near. Much respect man.

[@f1s2hg3]

I’m back at the KZbin channel and your hard at work making dreams come true! Thanks for making dreams come true your work is best

[@johngeddes7894]

Thanks for posting this. Lots of solid info and we should send Dave some love.

[@benw5800]

I sure enjoy your commentary and craftsmanship. Thanks for sharing these wonderful videos.

[@alveydoug]

Love hearing the instruments after you’ve intonated them. Lovely.

[@steelhead197]

I’m so glad you enjoy Dave as well! He’s fantastic! 🇨🇦👍🏻

[@jeffkatzer]

I'm sure enjoying these videos. Thanks for all your hard work.

[@billallen1594]

Thank you Ted. You never fail to impress me

[@eddiejr540]

Ted...your attention to detail is unmatched....bravo, my man!!!!

[@Coventry_Kiers_1984]

A long video, so needed! YES!

[@dannymangold]

Absolutely not only the most educational luthier site around but his narrative is fascinating to anyone even if they didn’t play or own a guitar. Some guitar repair sites can be as “ dry as a kitten fart”

[@alnicospeaker]

I've straightened necks on an electric kitchen stove for big oval pots (low setting, obviously) and an aluminium straightedge. Wrapped the clamped neck in foil for better heat preservation and multimeter with a temp probe. Worked and the neck has remained flattened.

[@perihelion7798]

There may not be any Jerry Rosa fans on here, but his 'Last Hurrah' guitar sports an absolutely gorgeous book-matched sides and back. It is absolutely beautiful. Take a gander at it.

[@richardkessler]

Beautiful work and guitars...I have a 1970 D 18 ... I have been the only owner .. because of a nerve issue I seldom play the D 18... I keep meaning to find a luthier in the St Louis Mo area... I know there are a few according to my friends.. In the late 70's I acquired a D12- 35... Wish I still had it.. Keep up the good work..I try to watch the current videos but watched this because of the title

[@JackdeDuCoeur]

Always enjoy your vids.

[@Sungodv]

The attention to detail (and knowledge) is what makes TWoody who he is....great work, Ted!

[@TheCleaner6969]

I've been watching some of your stuff & I must say I'm impressed.

[@GrumpyOldGit60]

Heating, Clamping, Guarding and Gluing... four words that make my heart beat just a little bit faster!

[@MrSyn31]

I subscribed at first for the repair sections of your videos and i found myself getting more into the guitar lore/history parts. Continu the good work sir. All the best, from France.

[@JoDoDesigns2011]

Always amazing the tools you make to get the job done.

[@robbychism]

A luthier friend turned me on to your channel and it has quickly become a favorite. Wonderful stuff, I'm continually learning from your content

[@ricksalt6860]

Excellent vid as always . Damn fine work .

[@cris.villegas]

I love to watch your work and explaining all about the process. and I'm always expectating to see what you gonna play at the end of the videos. cheers from Argentina!

[@jonahguitarguy]

I just built a heater beam. I also saw Dave's beam and there was another guy that did a very detailed video of his build. I've had a bass on hand for some time now that is very to far gone and will need heat for sure. It will be my first test case. The owner is ready to go for a new neck so nothing to loose really if it won't cooperate. Good work as always Ted. It's pleasure to watch you work.

[@stevesoldwedel]

Who was the guy who did the detailed build, if you remember?

[@jonahguitarguy]

@@stevesoldwedel, here’s a link. Very good info. kzbin.info/www/bejne/mV69ZGOwqZuXobs&feature=share

[@jonahguitarguy]

I’m sorry I just realized I gave you the wrong link. Try this one. kzbin.info/www/bejne/q4qVqpesnamaY8U&feature=share

[@NitroModelsAndComics]

If I ever need help with one of my fiddles I'll come to Canada and drop it off personally. You are always superb!

[@michaelnicholas8081]

always the best part of my weekend!

[@russellharris5072]

I'm glad you found Dave's heat press,I was going to mention it if you hadn't.Great work..............................

[@stevec.1802]

Resourceful and brilliant. Loved it.

[@bldallas]

No kidding, my heart skips a beat when I see a new video posted by you, Ted. Always great stuff.

[@dbhoward56]

Thank you for taking the enormous amount of time it takes to make videos like this, it is much appreciated.

[@T-goet]

THANKYOU from Seattle! I’ve been following you for a year or so now. I so look forward to your videos!…. as a late comer to your channel …. I can BINGE you 😆 I’ve owned a ‘74 Takamine F365 MS for about 35 years. I can’t watch your videos without my guitar next to me… making reference to MUCH that you are doing. You’ve shown/taught me so much! I’m also a Stone Mason. I have HIGH regard for your talent and craftsmanship!Thanks Ted!👊🏻

[@brent4uc]

Ted, you continue to have interesting and informative content from history to tool creation for all including professionals like myself. Thank you and keep up the good work!

[@KBorham]

Another awesome episode; thank you.

[@poppacooter]

great history really enjoyed it.

[@wyattsdad8561]

Ted does some damn amazing work. It always makes me happy to see someone do good work in their trade.

[@harrisonandrew]

Those Martins sounded great .

[@jakobbisgaard4018]

Sure do sound great. Nice video.

[@tommycato6368]

I'm so happy that I figured out the turnbuckle thing before I saw it in your video, have to do that on a 1954 Levin steel string.

[@UCS0608]

My 1973 D35 had the problem with the shrinking pickguard. They used the wrong glue back then and it caused the infamous "B-stringcrack". I saw it in a Stewmac video, checked my guitar and yes, there it was. It very well fixed by a famous Dutch luthier, no problem! And I really love the guitar, it sounds beautiful! By the way, love your videos!

[@stevenleek1254]

I really enjoy your detailed overview!

[@davidshaw5979]

A true crafts man at work and fantastic narrative. Great video. kind regards

[@ahg1358]

I always wanted to have an electric heat source for straightening necks . To be honest I almost never would have a reason for one not being a professional . Back in the 80's I got into National guitars and back then they were pretty much all in need of a neck set . I got a couple of good deals for the time and did a total disassembly of the necks , being young and fearless did both using alcohol lamps and primitive camping , maybe it's dumb luck but it was a success on both occasions . Now that I've gotten older I don't have the confidence or ambition to try this stuff today . God Bless keep on doin'what you do !

[@plakor6133]

Beautiful work.

[@peterjames2580]

Great Martin class!!!

[@jetphone1974]

Fascinating. Thank you for another brilliant video.

[@joelopiccolo8]

Thanks for showing your tricks! I’ve been learning so much from you, I really appreciate you and the patience you have, which I also am learning from you! You have blessed hands my Freind love from Michigan

[@MOAB-UT]

Great job- you are a master of your trade!

[@jipes]

Nice fix and great sounding guitars

[@Trev0r98]

Old Martin + Wisdom + Experience + Common Sense Engineering = near perfection.

[@shoretyus]

A friend had a 78' D 28 that needed fret work. I suggested Timberline Guitars i.e Kevin Hall. Turns out Kevin was in the factory when the guitar was built. Kevin was a repair guy called back to the factory during the strike.

[@ErnieB]

Thanks for posting! Most enjoyable, and informative.

[@railroader555]

The cheap S.O.B. that I am did not want to spend much on a neck heater so I was able to adapt the heat element and control knob from a slow cooker to a straight piece of square tubing. I start it on low , move to hi for a bit and finish on low. I monitor the heat with a Lazer pointer style thermometer. I've had great success with it. But I like yours better.

[@rogersorensen5225]

Good video. I have a D-18 just like that from 1970 that has all the same issues. By the way there is a place in China called Kenovo that makes a fingerboard heater that is reasonably priced. Its like a heating blanket only cut to the shape of a fingerboard. I bought one even though I didnt need it. But some day I might need it.

[@mikemclenison8200]

I worked for Fibes drums when Martin owned them circa 1972. Loved touring the Martin plant.

[@accutronitisthe2nd95]

I don't know why but watching you work on guitars is very entertaining...

[@johnb4183]

Great work / sound !

[@luvbgrass]

Nice work!

[@reubenjamesmoriones9235]

been following you since 2019! your ingenuity is awesome! keep on making this videos! we are learning!

[@johnnieboi]

Hi Ted great work as usual loving the Martin history and just about understood the maths nice to see a "normal" neck joint instead of 5 x 6mm wooden dowels like you surprisingly find on a 1970's Suzuki W400 eh? ...😕

[@imannonymous7707]

This is some great information. I have a newer martin that im not that happy with. I wish i could find someone with skills like yours. Everything you do and everything you say is just so precise

[@desolatemetro]

Great episode. Love the history and all the care that went into the details on this one. 👍

[@liammac9966]

Your playing gets better all the time x.

[@rayclark9643]

Thanks Ted very interesting and informative both from a historical point as well as technical!

[@okiwatashi2349]

Hey ted, you might look at reptile heaters if you’re thinking about a neck heater. There’s various forms available that can be set up with thermostats. Thanks for all your videos.

[@ldean-du5im]

Very nice video. Thanks!

[@philsphan6865]

Beautiful stuff as always!!

[@Sammywhat]

Always a joy to watch you work, Ted!! Nice job on that neck straightening effort! 😉

[@jeffsquires6620]

I have a 84 D35 that I use nickel strings on. Had a reset a couple of years ago and it is killer. Love Martin.

[@adobedoug2564]

Thanks for playing them for us Ted.

[@Kevin-nr9lj]

Both guitars sound lovely Thanks for the history lesson

[@frogmorepipester7490]

Hello, I am new subscriber. I thoroughly enjoy your videos. I am a busy gigging musician that has guitars always in need of repair. Luckily the bass player in my band is a luthier that retired from Gruen Guitars in Nashville. You are calm and cool like he is. Wonderful content. Thank you.

[@wilsonguitars156]

Always on the money!....I can tell you have looked at lots of vintage guitars...ive fixed em for over 30 years and done hundreds of neck resets and you have got it covered!

[@martymcpeak4748]

I am amazed by your knowledge of guitars, your morals and work ethic reminds me of a fellow Canukistanian lol.. a guy that goes by AvE..... anyway I live your videos and commentary.. you have my subscription...

[@johnhulsker9123]

Your editing is phenomenal,