727 Seal Replacement

  Рет қаралды 4,512

Shipwrecked Mopars

Shipwrecked Mopars

Күн бұрын

Пікірлер: 11
@dakotasclassiccars7246
@dakotasclassiccars7246 Жыл бұрын
I just did the shift shaft seal in my driveway with the trans in my truck. Your video was a huge help to see what I was doing before I did it. I did attempt to do it like you did, but couldn’t get any leverage to actually smack a screwdriver or anything into the seal to get it out. I ended up looking for the tool and couldn’t find one locally and didn’t want to pay $50 for one or wait for one. I ended up getting a 3/4” x 2” steel plumbing pipe and welded a nut onto it. Then I cut a barb into the threads of the pipe so that it would catch the rubber lip and thread in. I made it for about $3 and it worked great. Was able to do it with it in the truck and didn’t have to struggle. But dang I can’t imagine doing it without the tool unless the trans was out. Great video.
@TheAlFactory
@TheAlFactory 6 ай бұрын
THANKS! I’ve changed my leaking shaft seal in no more than 1h with your great video (engine in the car)
@josephbonnette7877
@josephbonnette7877 2 жыл бұрын
Looks like mother nature is being nice to you too. Nice.
@erikhansen8862
@erikhansen8862 Жыл бұрын
Thanks for the info my dude, really helped me out to clear up some confusion! Bout to go replace the rear seal right now!
@mikeyflowers3857
@mikeyflowers3857 2 жыл бұрын
Great video! My stub is out with the engine and trans on it and did the shaft seal watching this vid. Your videos are hitting the topics that no one on the forums really want to touch. Thanks a lot for making this channel! Keep it going!
@shipwreckedmopars
@shipwreckedmopars 2 жыл бұрын
Thanks!!!
@MrRatkilr
@MrRatkilr 2 жыл бұрын
On the rear seal. There is a hole in the dust boot. I believe it should be facing down to allow any water to drain out.
@LDB2991
@LDB2991 Жыл бұрын
Great thanks! Gonna do mine soon
@josephbonnette7877
@josephbonnette7877 2 жыл бұрын
Hey Wyatt, nice job. Why do my reverse lights stay on while in drive but turn off in park.
@shipwreckedmopars
@shipwreckedmopars 2 жыл бұрын
I've heard of that before im gonna say a faulty neutral safety switch if my memory is correct.
@shipwreckedmopars
@shipwreckedmopars 2 жыл бұрын
Find out what year trans you have, and see if it is supposed to have a 3 pin or single pin neutral safety switch. That drivetrain wasn't original so I'm not sure what year the trans was. Read this thread. Hope it helps. www.forcbodiesonly.com/mopar-forum/threads/reverse-lights-on-while-in-drive.27113/
Transmission Shift Shaft Seal Replacement | Dodge | Jeep | Chrysler | Mopar
10:22
Torqueflight 727 Rebuild Video
1:18:01
Momentum
Рет қаралды 83 М.
Andro, ELMAN, TONI, MONA - Зари (Official Music Video)
2:50
RAAVA MUSIC
Рет қаралды 2 МЛН
진짜✅ 아님 가짜❌???
0:21
승비니 Seungbini
Рет қаралды 10 МЛН
"Идеальное" преступление
0:39
Кик Брейнс
Рет қаралды 1,4 МЛН
Removing a front slip yoke on a Mopar 727 driveshaft
13:08
Bobs Classic Cars & Parts
Рет қаралды 391
torqueflite 904 tailshaft bushing and seal installation
11:02
Dartfreak75
Рет қаралды 1,5 М.
Bigger Engine.
2:03:51
SimonFordman
Рет қаралды 302 М.
727 going OLD SCHOOL...
21:03
Precision Transmission
Рет қаралды 88 М.
Chrysler 904/727 Extension Housing Bushing Installation
5:14
andrewsracingtrans
Рет қаралды 4,6 М.