72V Dual Hub Motor Controller Monorim Xiaomi M365 Pro

[@snrtfe]

i don't know about modify any scooter, but this modification looks clean and neat, internal parts modifications look very good, near to the perfection. it's nice to see a modification like this because everyone modifies their xiaomi like the ass. VERY GOOD JOB, and sorry for my bad english, i'm spanish

[@jk3r568]

Nice clean job brother. Thank you for your video, IT is very helpful, have same xaomi pro 2 Model almost finished. 😊👍🙏

[@Antony--DIY]

It's so beautiful!!! So perfect!!!!🤩🤩😍😍 Respect from Greece 🇬🇷👏👏💯🚀

[@cjbh9516]

You just serial connectet the battery's...and controllers...so you still have 36v on each controller...

[@messor01]

For the front wheel, where the valve is behind the brake disc, how do you pump it up?

[@UADPluginsCrackRU]

This does not fit back on the m365 scooter. The wheel ended up being too thick. Is this only suitable for the PRO m365?

[@alexandermakarow8585]

Which suspension do you use on rear?I try it with MR 1 and don't work

[@remitardieu6679]

Hi can you tell me where i can find the stl of your dashboard holder ? Thanking you

[@rotem2116]

Do you have a video for the controller upgrade if you dont what did you change ? And what is your controller verison ?

[@marine1718]

Well done can you share more details about the build? Max speed?

[@cjbh9516]

A voltage divider doesn't make your scooter 72v. You could add 144v divider over four controllers... Still you have 36v on each... But 4*250w...

[@EngrRobPangilinan]

Galing pre.. 👊👊

[@jayzeeph5620]

Salamat haha

[@djjays1dnb]

Having problems downloading the cad files. Any chance you have the files still pls?

[@abash6024]

Hi what’s is your speed with 2 motors? Thanks

[@keaaul808]

Would be more helpful if you provided parts list!

[@tomer_elitzur]

Allow a link to this wheel. I want a 10X3 tire and don't know which wheel to buy.

[@fl5537]

What is done to the ESC? MOSFETS, capacitor, trace cut, anything else? What firmware do you use?

[@minalobudeshte]

hi, do you have any further info about the controller mods? I converted one Chinese controller and drove it for 10 minutes before it burned. Well it burned because I was going a very steep hill climb about 300 meters long and suddenly the scooter turned off. Otherwise, it rode pretty well on a 17s battery. I changed again the mosfets but it is not turning on. Do you have the complete instruction about the esc modification? On mine, I only changed the big capacitor with 100v one the mosfets and cut also the trace between the plus pole and the plus capacitor pin. Nothing more. I appreciate it if you have any further info to help me.

[@rotem2116]

@@minalobudeshte found any info ?

[@don.s_a_l_v_a_t_o_r_e]

Super Scooter!👍💯 Question: in Aliexp. There are 4 different chrome rims with black with 3 stars in the middle and the edge is chrome. These are 10" rims for 10" x 3 tires. Do you know which rim from the 4 pieces different from Aliex. fits on the Xiaomi?? It's this chrome rim from the Kugoo Scooter. Do you know if this chrome rim from the Kugoo Scooter fits on the Xiaomi front side? Kind regards.

[@UKMrMedical]

Hi can you show a detailed video how you mod the controllers please to handle the voltage did you do a trace mod ?

[@don.s_a_l_v_a_t_o_r_e]

Hi! Great video and scooter!! I have the Xiaomi 1s. I ask you for an answer. I see you put 10"x3 tires on the rim. Is that correct, I have to have the rear wheel rim turned by a machine in a company (locksmith), left and right 2.5mm less. After that, the wide tire fits 10"x 3 ? Is that correct? Or is it possible to buy the rim already finished with 10"x3 tires. Or do I have to have 2.5mm removed from the original rim in a company on the machine. Mfg

[@domin_s]

what is size of screws

[@clementfpv5054]

hey, how did you fit de tyres ?

[@nospeedlimits7777]

Hello, your dual motor work is so good.. beautiful 3d print second display red support u made. Can u make one for me too? Price + shipping to Italy? Thanks mate!

[@czarne_pole]

Cool, clean build

[@Wissemdz7]

what a beast !

[@restyplaza2020]

How much do you sell a controller

[@golibroda]

Very nice work 👍

[@jayzeeph5620]

Thank you

[@MrFabiooo1]

hello i would like to make your 72v mod exactly on my pro 2 please can you tell me how you connected the controllers in series ? I have now ordered 2x monorim motor will buy a 2nd original battery and 2x controller upgraded mosfeet and capacitor please help how to connect everything in series! Thank you for your great video, I hope to receive a message, perhaps also by e-mail, with instructions

[@macjames2591]

Will it fit to my battery 48v 21 ampere?

[@hamadi5947]

What absorber is suitable for the xiomi 4 pro scooter?.....

[@ricardorapture]

monorim, esparts, shark, konyx...

[@Kinglui80]

hello where can i find the file for the dashboard holder?

[@MotoTaz86]

It's very beautiful ☺️ I ve got Pro 2 and i want to make it 2aw but I can't understand how you connect dasports🥺

[@pashko90]

Very nice build!

[@jeanguemise9328]

Bonjour vous avez un schéma pour le branchement des contrôleurs m365 modifier !?

[@dias1436]

très bon travail les pneus que vous utilisez c est quelle taille et quelle marque ?

[@macjames2591]

Is it okay to use my 48v 21 ampere ? Im concerned about the controller limit can hold...

[@hermmanpizarro2676]

El voltaje debe ser igual el amperaje si puedo ser un poco diferente pero no mucho

[@miguelnegrete5140]

De terror 🤠✌️

[@bruno3833]

Whatss max speed and distance with this moded m365?

[@jayzeeph5620]

Max speed on display is 80kph but didnt try on gps. Max that i tested was 45kph was too scared to go faster 😅

[@jordigrau3625]

Amazing video. ¿Could you paste STL files for the 3d models? Thank you.

[@jayzeeph5620]

Yep all stl files can be found on thingiverse. For the display mount search "m365 second display"

[@jordigrau3625]

@@jayzeeph5620 Thanks

[@davidpiket9672]

@@jayzeeph5620 And your parts used in the video, I'd really like to add some of these to my ride. Thanks in advance.

[@kelvinyhenrique1869]

Did you make this bigger battery cover or were you able to buy it somewhere?

[@pashko90]

He 3d printed a spacer for a stock cover.

[@kelvinyhenrique1869]

@@pashko90 thanks

[@ronaldausejo2303]

Hola me encanta el proyecto y me quiero hacer uno podrías compartir el link del fitware que usas con. Las 2 baterías

[@DopeFiend]

Man, that's one crazy looking scooter now, what's the top speed now?

[@misterbossh897]

bonjour savez vous refaire ce meme modele et combien le venderiez vous ?

[@davidpiket9672]

Wonderful build! Wow. Could you be so kind as to provide all the parts that you used on this build please. Do you sell your custom parts that you 3 d printed?

[@jeanguemise9328]

Je voudrais juste modifié mes contrôleurs comme les vôtres et savoir les brancher si possible 😁

[@Vosovogalsyncope]

Nice job 🤘🏿

[@DailyClipsChannel05]

sir. anung size po ng gulong nyo both front and back po. para sa pro 2 po sana kasya po ba yan ? TIA

[@BH4x0r]

idk why you'd want to use the original controllers tho, it would be the first thing i'd get rid of on one of these scooters

[@chefabrils5519]

Bangis boss saan place ka boss Anong tawag ung machine mo na gumagawa Ng 3D extender Ng kaha,lupet kakabilib mag modified Ilan nman kaya boss tinatakbo Ngayon Ng scooter mo pwde ba bumisita sa lugarvmo

[@DimitrisConstantinou]

Very good and clean job! I noticed that you have installed very thick tires. Can you tell me where you bought them; Because I could not be able to find tires thicker than 2 inches that are compatible.

[@pssyslyrr6074]

Hi saan nyo po na get motor hub nyo?

[@nayrd1stud]

Sir nagbebenta po ba kayo ng ganitong build?

[@davidcortijo32]

Si sacas las baterías de las cajas metálicas, entran juntas en vertical dentro del chasis y solo necesitarías un alzador de 31mm👌🏼

[@mahmoudhemida3028]

Brother I love it Tell me what did you buy and from where Bro give me the details because I want change my scooter also Thank you 🙏

[@احمدعلي-ذ3ظ2ه]

من موقع علي اكسبرس كل ما تحتاجه موجود

[@ricardorapture]

My Monorim Stem broke in 3 months. Be careful, guys. The sticker did not lie.

[@ichimotovlog7121]

Wow nice.👍

[@buloyvlog713]

sir request video roadtest 😁😁👌👌

[@MK-ks4pw]

what is the motor ? it loos sick :)

[@jayzeeph5620]

Only stock motor for non pro 250w 😆

[@MK-ks4pw]

@@jayzeeph5620 really ? But what kind of tires did you use ? They look really wide. Can you please send me some info about it. I really woudl like to get them for my scoot.

[@SimplengTao0417]

Ilang na yung KPH nya ngayun at range??

[@jesusisoursavior2682]

nice one bro 72v lakas ng bat no ano max speed mo?

[@pimpmaster8769]

boss san po pwede bumili ng dashboard holder? salamat po

[@jayzeeph5620]

You can pm my page po jz autolights for quotation

[@robertbrunskill3526]

@@jayzeeph5620 I have the same scooter doing the exact upgrade I have installed everything the same as you but dont know how to wire both dashboards up is it possible to send the wiring diagram please

[@fighter67]

cool

[@hubertbuceta8082]

can you give me the firmware

[@ken2terror]

Hm pa customize??

[@karlaldricherana4551]

Saan ka nakabili ng hub boss

[@benhurapilado3767]

SEVENTY TWO VOLTS....72V WHAT THE AHMPERS OF BATTERY AH...

[@cjbh9516]

Low top speed...max 32km/t. 😀

[@marine1718]

If monorim pay me i do a build with monorim stuff to thay are to expensive

[@medvador1516]

😂😂😂🤣🤣🤣🤣🤣😂😂😂👌

[@vloghots7472]

Но это же не ксяоми а кастом

[@леонидленчак]

клиренса вобще нет

[@justynssagan6156]

All that you might as well buy a new scooter🤣

[@hermmanpizarro2676]

Es más divertido modificar uno que ya tienes y transformarlo en una bestia