8 Ape Hangers on 8 Different Harley Davidsons - Comparing 10" to 20" Tall Handlebars

[@troyroberts5314]

My 14" bars saved me from giving up riding. If my hands aren't at least shoulder height I can't ride more than 100 miles. I don't know why that is but it makes me wonder how riders have called it quits because of the stabbing pain of riding with stock bars. Watching your videos you've touch on the benefits and it's 100% accurate!

[@IMTHATN1NJA]

That’s nice I heard if it’s to low it makes your shoulders hurt. To high and you start losing circulation

[@onOnewheel_jay]

did you have to get extended cables

[@troyroberts]

@@onOnewheel_jay Yes, new clutch and brake cables. Nonetheless, I still highly recommend

[@robertbarnett7993]

I run 15" bars on my 2015 Road Glide, perfect ride. I'm 6' and run a Saddlemen seat with a 10" Klock werks windshield.

[@kornklone]

Been trying to decide between the 12" and 14" bars and this definitely helped.

[@vernonyow1509]

I just want to thank you for making such detailed videos... I just finished up my 14" bars on my streetglide... Thanks alot and as always keep up the good work👍

[@walterfechter8080]

In the 1960s, I ran Flanders ape hangers which were approximately 14" high. Those bars were just above shoulder height with me on the seat. I was pulled over by cops more times than I could count. Eventually, I switched to a lower handlebar.

[@jayreezy6733]

Cops don't pull folks over for ape hangar height much anymore...at least, not in the 25yrs that I've been riding, I've never heard anyone complain of it...as long as they aren't 20 or more where it's crazy, I doubt any1 would have police problem with tall bars

[@Needcoffeeee]

i am 5'5" on a 2011 Road King with 14" apes. It is about shoulder length to me. Very comfortable ride on the hi-way but not great on the twisties

[@baddgoat85]

This video has solved such a dilemma for me. I haven't been able to decide what inches to get based on how it looks installed with someone actually sitting on the bike. Think I'm going to go with 13 or 14 inches. Thanks!

[@edsahara]

I think the 12" bars are actually shoulder height for you.

[@jfm562]

I agree.

[@brianladyman6426]

I love the 16s on my road king. I am going to put 18s on my CVO

[@rubicon1889]

Thank you for doing this video. It definitely helped my decision on what bars to go with.

[@kevinrollman3101]

I owned a 1973 Honda 750 four with King Queen seat and 15” ape bars. It was semi-chopped and the control you had over the bike with these bars was just great!! I had a few panic stops because of other vehicles that stopped purposely in front of me, or turned broadside in front of me, and these 15”ape bars allowed me to have control even when because of no ABS the rear wheel was at almost 90 degree angle and I was still able to come out of it and stabilize.

[@arynx1245]

thanks bud! now i know exactly what size to pick up!

[@sethboggs3058]

I’ve ran 16s on 3 bikes. 2 with mustang seats the other with a saddleman. I’m 6’ 2” they are perfect plus I like wide handlebars

[@mk-vgkfan]

At 5-10 I have a lower profile Saddleman 2-up seat on my Softail Deluxe. With 16" HD Apes they appear more like 18" because of the lower seat height. I could not be happier with how comfortable they are compared to stock handlebars! To each their own, but it's been my experience that when people who talk poorly about Apes actually try them they are amazed at how much more comfortable they are than stock bars.

[@bamabiker]

20" bagger bars on my electra glide. had 16" on my cvo ultra classic but wanted more

[@p2o8wer]

ALWAYS go next size up. If you want 14” go 16” and so on.

[@Sonic_Boomer_]

thats what she said

[@maxxbenzz7842]

That's like saying I want a Streetglide but I should buy a Roadglide.

[@awedihdaira2786]

I got 18" ape (including riser) on my street bob & they're preety comfortable to ride & I'm 5.11" tall

[@CryptoiNNERG]

Great idea! Love this video, Yall should Definitely do a part 2 where you show the side view longer for each one (clips were really short) a back view and a front view would be great too! Just an idea.

[@iamfrickincool]

I searched the topic to hear some compressed exhaust but this was more useful and informative so thank you 😂

[@debrafisher6627]

14 in ape hangers on my 2020 lowrider had a little problems but got them solved and love them they look awesome😎

[@mrcrunchy83tc]

How tall are you? I'm about 5'8" ish And I'm torn between 12s and 14s. T-bars

[@henryfreab960]

14" with 3" risers on 2000 fxst with corbin seat perfect for me, im 6' and shoulder issues comfortable for 67000 miles on it.

[@projektxent]

The 12 inch bars on the Street Glide seems money for me. 6 foot tall by the way

[@_TwinnA]

You should get 14, of you think u want a height always go one up, because when you get it it usually will be shorter than you anticipated

[@jamesd3002]

@@_TwinnA could just get the 12 and purchase a higher riser if needed

[@zeeshandiwan6630]

great video to judge what a handlebar side profile looks like! thanks guys

[@ranchodeluxe1]

Right. Because handlebars are all about looks.... Right?

[@j.hood1191]

This video was extremely helpful for me 👏🏾

[@mikepsly73]

I have 2019 RG Special. I'm 6'1 and 16's are perfect for me while using a lepera streaker solo seat. Alot less cushion on the seat and i sit further back than i would with that crappy stock seat. I also use the lepera maverick 2up daddy long legs for when my ol lady comes with. Great seats for taller guys. You must take into consideration what kind of seat you have as to how high you go with your bars. I wouldn't want 18's on my bike with the style of seats im using.

[@jontest5718]

I’ve got daddy long legs seat on my 2011 road glide. Thanks for sharing this. 16” bars it is

[@AC-mh5vw]

These are videos that really help you. Good job 👍

[@Punk-Jw]

I have 1.5 14" apes on my street glide. They were on it when I bought it and thought thats the first thing I was going to change, but I love them now that I've riden it!

[@j.vosier6786]

What brand are they?

[@Punk-Jw]

@@j.vosier6786 they're either paul yaffe or FBI (fat baggers inc.) They're the classic style

[@kervator]

payless work mates!!! incredible work with this video for all community over the world. Congratulations and thank you from Spain.

[@thanosetsitty1896]

I’ve got 13” lucky 13’s on my street bob with stock seat and they are shoulder level and I’m 5’8. But I’m planning on getting a two up saddle men or the sundowner from Harley. So I’ll probably have to go with 18’s on the bar. Because I’ll be sitting higher and closer to the bar.

[@WillieReactsTV]

I just bought a 2024 softail standard very similar to the street bob… I plan on buying a saddlemen seat .. just want to ask , should I just go with 16” apes? Or should I go with 14” apes? … I’m 5’10 and do mostly 200 miles on weekend and some commute to work,gym etc …..

[@glendekoker3682]

I love the ape hangers they sell. He has video on how not to pinch wires but sent me damaged kit. They did send me replacement switch and wires but it shouldn't have happened. I do like them and they did fix. My chrome app are very low amount of chrome at the lower bends but not that bad. So I would say great apes just need to work on quality control.

[@painkiller6768]

Thx for making my decision harder bro. I want them all. I’m trying decide between 14” or 18”. I have a 2019 street glide. The both look awesome. I had 14” on 09 night train. They were so comfortable. I could ride for hours. I have stock bars right now and my back starts hurting after 1 hour of riding. I would love to know is putting apes on 2019 street glides is something I should attempt by myself. I’m retired army medic that was assigned 1st cav. So I have worked a lot on tanks, track vehicles and strikers. I know not the same. My point is I’m not mechanically challenged.

[@mikepsly73]

I have a 2019 road glide and if could show you pictures I would. Your 2019 is still under warranty man. Thats a big decision. It depends on what bars you get. Some bars are difficult as he'll..some are super ez. Look up Fat Baggers Inc. Online. I got the FBI 16" EZ install bars. You dont even need to buy new cables for your bike. They send extensions for your existing cables in the package. Now im not mechanically inclined enough to put them on...but Grizzly HD was able to get those bars on and a TAB Zombie exhaust stage 1 kit installed in one day. Normally bars take a day themselves for a mechanic.

[@mikepsly73]

They have 1.25" and 1.5" bars from 12"-16" for 2019 I believe. 1.25" they might have higher. But I didnt dictate the height of my bars as so they don't come over the fairing like most dudes. I went with 16's because I want whats best for the ride.

[@ryanmoore2779]

I installed 18” Carlini apes myself on my 07’ Deuce. I love em’ . You can do it no problem

[@superglidefletch8003]

Just bought a Softail Slim S. I’m coming to you this summer to get those bars! I’m a few hours away from your shop but I enjoy your videos and ride across Texas to get that Pro Quality 💯

[@Tawni.6269]

This video answered all but 1 of my questions, I would like upgrade my metric cruisers stock beach handle bars to 14" tall 1" OD apes can you help me?

[@Tawni.6269]

How do i measure to determine whether i have 1- 7/8 or 1/2 in handlebars? Do you have a video on this?

[@mikeymike3449]

great videos!, i reciently purchased a Softail street bob and your videos are super helpful!.

[@Streetglide2021]

Great video! Thanks I ordered some 12” bars and thought they might be too high for me. I’m about 5 10” but watching your video they should be ok,

[@ranchodeluxe1]

Ya. Because a You Tube video validates your preconceived notion.

[@maximumoverdrive2132]

When I installed my 16' bars I remember thinking I wish I'd have went with 17' which I did find. When all said and done with some nice risers and labor, seems like I had right around a thousand bucks in the whole sha-bang. Nothing's cheap these days.

[@edmondndrecaj4377]

Love my 20s on my 88 evo heritage

[@93cherokee37]

Greta video. I have 16s I was debating on going with. I think you made my decision

[@blujack100]

I’d like to see a similar video for M8 soft tails specifically the sport glide. Thanks

[@mikeysmith3755]

Yes

[@andrewkitchenuk]

Definitely

[@rossdonison4999]

Me too

[@keithhgallop7232]

Sport glide is a soft tail?

[@AhkadamahMashiach]

The 20s" actually look fitting on that ST

[@garywihongi1705]

Thanku bro loved every vid you posted aye helped out a whole lot more viewing tonight

[@loneranger8343]

18" 🔥

[@pyro707]

So I see the 20s have a little play. Do you recommend solid riser bushings for them?

[@lowcountryskiff1315]

i had 20s on my street glide went poly first was a mistake right off go to the solid riser bushing

[@KObyOne]

Extremely helpful video, thank you👍🏼

[@mantis1962]

Awesome videos. Can't compliment you enough.

[@devinwang1603]

out of all the bars you showed, which one do you prefer the most and why?

[@dgwilliams4795]

To me, the 12" look perfect. I want a little fairing protection for my hands. Just wondering whether stock mirrors will still be visible?

[@gamppj]

I have 12" yaffees' on my street glide..they are perfect..I'm 6ft...the stock mirrors are visible and I wouldn't change a thing..

[@raffeal247]

@@gamppj Did you have to get cable extensions?

[@gamppj]

@@raffeal247 I think you do I'm not for sure..i got stainless steel braided lines and they look 👌...internally wired

[@robperkins2674]

Yes from underneath your arms

[@markburnley8577]

Please show a roadking install with 18

[@roosterq3209]

Thanks for this video. Very informative

[@beerbottlebaby]

"I'm 5'11" on a normal day." Little shorter hungover? Little taller pissed off? Lol.

[@Johnny-df4di]

That's the best comment I've heard anywhere...

[@ranchodeluxe1]

I do a bit more than watch videos and don't feel the need to validate my work with the approval of the You Tube crowd. Wanna race? Grab your best apehanger bike and see if you can hang in Vanocker Canyon. " LOL"

[@Marc-cj2dd]

@@ranchodeluxe1 Maybe you should stick to racing on the track. "LOL"

[@brettleisy356]

everyone has different comfort ranges. I like mine as tho I am resting them on a table, this also allow for most movement when handling the bike, too high and my fingers start to tingle and between my shoulders start to fatigue. even with all this I am looking for slightly higher on my road glide but only 2-4 inches at max. also some people can get thinner seats or a seat lowering kit which will also change the arm position.

[@JBZOOKJB74]

12s will be just perfect on my 2020 Street Glide Special

[@mikeessary4925]

Just curious, how tall are you?

[@JBZOOKJB74]

​@@mikeessary4925 6 0" / 183cm

[@jasonwyles9952]

Thanks for making

[@chrisletona8924]

I noticed on the last set of handlebars there was play when you pulled back on them, are you using solid bushings for that setup, and are you planning on doing a T-Bar setup video soon? THANKS FOR SHARING

[@lunchbox5072]

I like the 20 inch bars! They come in black?

[@markburnley8577]

I would love to see a roadking. With 18 inch install

[@darrinleazer6784]

I'm 5'9 and have a 2015 Fatboy. I bought it used, and it came with a set of handle bars that I haven't never seen before. I want to go back to the original style handle bars that came with the 2015 Fatboy. But' I'm not sure what they look like, and I need help trying to find them.

[@jasonschad5379]

I'm short, 5'7, so I think anything from 10-12 inch would be pretty good for me. Thanks for the vid.

[@cwheremonster8870]

Go sit in a stick Road King (any HD dealership). Those will have 10 inch bars. You might want to grab some 12’s. But that will give you a decent idea

[@cwheremonster8870]

“Stock”

[@jasonschad5379]

@@cwheremonster8870 ive been doing this recently. And yeah, 10's are basically perfect for me.

[@blown8642]

I'm the same height. I have 14's on my Softail Standard. My hands are just above my shoulders and it feels fine. My bike came with 10" mini-apes, the 14's look way better, and straightens your back out a bit.

[@M4nu3I]

@@cwheremonster8870don‘t they have 8 inch mini apes? I‘m also 5'7 and want to have the bars a bit more back towards me. But if I turn the stock bars towards me, they‘ll also get lower a bit.

[@faresrock3979]

12 & 14 inch its good actuality...👍

[@vtwinpower1903]

Hey brother do something on different TBars sizes shapes n for different rides ,performance n cruise. I got a hotrod bagger with a DRAGON T143 in her n I'm thinking something like a dirt bike style with a riser for comfort n performance, I need something so I can lean back more since I have a lot of back issues.

[@donaldduck2405]

Thanks for the video.

[@Tlaloc9]

I have a 2015 Street Glide CVO, I like to get the 14” inch ones, my question is will I be able to install them myself or will it has to be installed by a H-D shop?

[@chopp5613]

I have a 2020 fxbb and I bought some 16” narrow apes, but having trouble finding out if I need to also buy wiring extensions along with an extended upper ABS front brake?

[@MasculineByNature]

Great video, thank you

[@shermanreynolds4304]

Starter bike was a Honda shadow 1100 with like 12 inch ape hangers

[@jeremymoorer1611]

This helped a lot, Thanks✌

[@butchhighwayranger4930]

Cool 😎 Vid! Thank you!

[@eb1941]

Can you suggest a 14" Ape that has minimal pull back or wrist angle. I want to keep my wrist as straight as possible. I am 5" 11". Bike is 2005, HD Deluxe. Great video. Thanks for the help.

[@corychin7090]

I like 14 rolled back slightly. Keeps you sitting up straight

[@justinsorci5998]

May as well go for the full outstretched flying squirrel bars and highway pegs package.

[@alonzoryan357]

I'm working on it as we speak. I'm 5'6" with 17 inch ape hangers on my 2010 Road King classic. I'm about to get the highway pegs installed soon

[@evil_musclemuscled3814]

A very helpful video 👍👍👍👍

[@timbarnett3898]

I love the look of apes, but my wrist, hands & fingers twinge an bother me if my hands are higher than my shoulders (when than happens blood cut off rather than supplied in lower arm position) So I like the 12" set but wouldn't go any higher, for riding comfort & better control!

[@ALKYMZ]

Great Video!!!!

[@heathertaylor8678]

i wanted 16s but now 18-20 are a must on my me too bike

[@StreetTruckinTitan]

remember higher the bars the less control youll have in a defense maneuver.

[@komododragon4242]

Thanks man. That's what I needed to see.

[@mrnonpc9885]

Is there a reason why the bars are always mounted in what looks like a straight up position? Is there a problem with having them pulled back so you can relax against the back rest? I use to own a Dyna Wide Glide with factory ape hangers, forward controls, and King and Queen seat. I considered that the most comfortable bike I’ve owned. I just bought a 2017 CVO Limited, and the riding position with the Factory 10” bars is uncomfortable. I can’t even get support from the back rest because I’m hunched over. I’m thinking 12” or possibly 14”. I just want to be able to do long pain free rides again like I could easily do on my Dyna.

[@iamfrickincool]

Old school Shcwinn nostalgia

[@angelomaurizio1668]

I'm 5'5 using a stock seat on a Yamaha Stryker and thinking going with 14" apes, any suggestions are appreciated, Thanks!

[@Steve-qn8gn]

I find it interesting that he thinks his hands are level with his shoulders with the 14” bars. They are clearly over his shoulders. One think not really mentioned is that you lose quite a bit of control the higher and wider your hands are.

[@uzis4life]

Im about to buy a harley street glide with 14 inch handle bars and im somewhat on a new rider lol should i be nervous? I rode a lot for a short period of time but that was years ago 😅

[@ajustice2010]

*hi dumb question here* I have a ‘12 roadglide ultra, how similar is the bar heights / seating to the newer bike shown here ?

[@bizerker1497]

Great video. I just bought a 2021 RG Special just over a month ago. Looking at getting some new bars next year. I'm 6'4" Dropped almost 100lbs so only 200lbs now so my shoulders are wide but not as much as before. . Not sure what height I want or the brand even. Have to feel them out. This is a great video though.

[@tikicaptain]

I would suggest looking at the KST Kustoms Spearheads. I put them on my 21 CVO RG. The nice thing about them is that they are 3 piece. meaning that the upright arms pivot at the base allowing you to pull them in or push them out depending on shoulder width. You can really dial them in more than most other bars.

[@bizerker1497]

@@tikicaptain Thanks for the input. I appreciate it.

[@rjgamble2551]

Awesome Video

[@sixwheelcarlisle8491]

I’m on the hunt for ape hangers for my 2010 FLSTN deluxe, i’m 6’5” tall. Ps. First cruiser i’ve ever owned or ridden.

[@thebeastytank]

Go 24 you tall fella

[@yogeshchandthakur]

Thanks for your effort 👍🏼

[@justinbaker1584]

You should do a similar video for t bars

[@RidersUnited]

I got 2022 Road King Special I am similar height to you at 5’10” What would you recommend for height to get me comfortable?

[@bschak4944]

I am looking at 14" for my 23' Ultra Limited. Will I need to change the cables?

[@kennethwood6474]

Looks good can you put 18" ape hangers on tri glide?

[@amdarealmvp4333]

I’m 5’7 and what size of handlebar should I go for?

[@aninja7628]

Could you do a video on the 2018 breakout 114 with a range of 10 inch through 16 inch bars?

[@dennisbereziuk6284]

HI , SURE WOULD BE NICE TO KNOW THE PART NUMBER FOR 2014 SOFTAIL CVO MINI APE HANDLEBARS , it is my nightmare to figure what is best . thank-you

[@T3b_Custom]

What handlebar it's perfect for a 5.1 tall person on a road king 2006 ?

[@kevingilpin6707]

Hello, i have an 01 Springer softail, i am 5’11”, do you have an idea about what size Risers would be ideal for my bike if i was to buy your 16in kit? Or 14in kit and what size bars/risers do you think would look best on my particular bike, Thank you!

[@eb1941]

Can you suggest a 14 inch bar where my wrist are straight forward? Thanks

[@michaelknight2897]

I will check you guys out, I LOATHE my 2010 Fat Bob bars. The wrist angle is terrible. They clearly designed the bars for looks not for function.

[@lilOme131]

Where do you buy the handlebars from ?

[@billycody96]

At what height would you need to start adding extensions?

[@dannyshaklovitz1449]

Depends on the bike. For baggers though, any bars taller than 12s will need extensions

[@borisnong]

Sir, I am enlightened by your videos. I am 5'9". Is 18inch ape hanger height okay for me?

[@iRafaelkr]

I'm 1.88cm (about 6'2), and I'm not sure if I should get 12" or 14" to put on my Virago 250