8 Essential Tips to TURN Your Garage into a DREAM Space!

[@Macuhdohnadadoh]

Looks very squared away. Nice work. French cleats always worry me because I’m clumsy and imagine myself knocking off the cleat when I go to grab a wood clamp with an upward motion. But I’ve been thinking about making some anyways. Seems like a remote switch so that you can start the garage heater the moment you wake up in the morning would be the chairs on top. 😊

[@RSTechALO]

Thanks for the kind words. Yes, the french cleats can sometimes be "disengaged". I solved that by making sure on the heavier tools/clamps that the "tool bracket's base" extends down far enough to overlap the next row of french cleats. This keeps the cleat from wanting to rotate out of the "v". I have/had that problem with the clamp bracket too. I just need to modify my clamp bracket (which I haven't done yet!). As for the heater, I had the same thought. A programmable thermostat running it. Unfortunately, when they installed the wiring from the heater, they didn't run a "power" wire with it, and the wiring is inside the wall. So the thermostat they have on the wall is battery powered. So, I just set the temp in the garage up 30/60 minutes before I am going to work in there... Normally I leave it at 40 deg during our cold Iowa winters.... Thanks again for the feedback!

[@messygarage9387]

Thank you so much for this video. I did not have elders to pass on all these tips to me when I finally found myself in the garage! 😊

[@RSTechALO]

Appreciate your feedback! Yes, I think all of us, thru the years learn by experiences with others. Until you experience having some of these "niceties" you don't know how great it is to have them!

[@DMW1969UP]

Incredible video. Thank you for sharing!!!

[@RSTechALO]

Thanks for the kind words! Have a great 2025!

[@joseluiscano9964]

Great video. Thanks for sharing.

[@RSTechALO]

Thanks for watching! Yes, my dream garage has been perfect for all my projects.....

[@desertlifestylegroup]

Nice garage and video. Thanks. The French cleat idea is great. My carpenter introduced me to those almost 25 years ago when he had to hang a very heavy mirror in my house. I’d never thought of using them in the garage as you’ve done. Excellent! May I suggest you patch that section of Sheetrock behind the plastic where the hose bib is? What you’ve installed is not fire rated for 1 hour. And your garage is attached to the house. 🙏

[@RSTechALO]

Thanks for the comments! 1st, The drywall section that was opened to do the plumbing work was reinstalled. I wasn't very clear on that. The plastic panel helped hide that removable panel, but was more for ease in cleaning splashes from the sink. We also used the french cleat to hang our headboard for our bed. I too was amazed how strong those can be. Have a great 2025!

[@jthawkeye6009]

What brand of motion sensor did you install in the ceiling?

[@RSTechALO]

I believe it is a Lithonia Lighting Sensor Switch - www.acuitybrands.com/products/detail/708818/sensorswitch/cm-series/ceiling-mount-low-voltage-sensors?_gl=1*n25dtf*_gcl_au*OTc0ODc5NDEyLjE3MzczNjYxOTA.*_ga*NTUxNTQwODc4LjE3MzczNjYxOTA.*_ga_ZGFQSN9WXQ*MTczNzM2NjE5MC4xLjEuMTczNzM2NjQ4NC4xMi4wLjA.*_ga_LZD7MDDNQZ*MTczNzM2NjE5MC4xLjEuMTczNzM2NjQ4NC4wLjAuMA..

[@jthawkeye6009]

@@RSTechALO Thank you so much! I enjoyed your video very much. Great common sense ideas!

[@RSTechALO]

@@jthawkeye6009 Thanks again!

[@1brokenbychrist]

Great tips! And you are SO right about having a space on the shelf! Your garage inspires me!!

[@RSTechALO]

Thank you!! I love the space!

[@Jim-vi4hh]

Great video. Thanks for sharing these tips. I realize I need to get rid of some stuff that I don't use or need. Your video provided me some inspiration! Take care.

[@RSTechALO]

Thanks for the kind words, JIm... I have to admit that having to move to a smaller house helped us "thin the herd", so to speak, when it came to all the stuff we hadn't used in years.... so storage at the new house was alot easier!

[@V8SKULLS]

I just came across your video and you have a very nice an organized Shop/Garage. Thank you for taking the time to share it, looks Great

[@LindBrosRacingLLC]

Thanks for taking the time to watch! Yes, after decades of having a detached garage with limited space, poor lighting, and miserably cold in the winter, this is wonderful. Working on "projects" is alot more enjoyable! Happy New Year to you!

[@V8SKULLS]

@LindBrosRacingLLC And a Happy New Years to you and your Wife

[@RSTechALO]

Thanks! And you as well!

[@davewise29]

So glad when I was 35 I built a 40x60 pole barn with every tool I need!

[@RSTechALO]

You definitely did the right thing! Unfortunately, for me, I had to wait until I was retired, and build a new house to get my space! I'd love to see photos of your setup.

[@marcusmarrs]

This is the first video I’ve seen of yours, but I was totally impressed at your garage/workspace. Some of your tips I have had in the back of my mind to the eventually do in my workspace, but haven’t had the time or the funds to do it with. And some of your tips I have never thought of. Like the motion sensing light switch. anyway awesome video. Awesome tips. Thanks for sharing!

[@RSTechALO]

Thanks for your kind words..... A novice at doing these kinds of videos, but I am proud of the garage we created. So I thought, what the heck, I should try to share with others the planning and the outcome... Glad you enjoyed it. Please share with others who you think might enjoy seeing it. If you haven't subscribed, please do. Hopefully, you like some of my future videos on technology "how to's" and my new hobby, drones!

[@walterdavis3638]

Great points. You hit on all of my pet must haves. I also added some 240v outlets for welder and plainer and also ran concealed air distribution on the ceiling and along the walls. Your organization is to be admired. Good job.

[@RSTechALO]

I’m glad you enjoyed the video. I was so excited to finally have a space where I could work on projects without being cold!

[@davewise29]

Great video. Thank you for taking the time to show us your shop!

[@RSTechALO]

Thanks for the feedback... I am new to this whole KZbin world, so I am glad this one turned out ok.

[@bornwestusa]

Thanks for the garage tour! Truly a dream garage!

[@philh.7100]

I’m in the process of setting up my work shop in the basement and a lot of your tips will be helpful. You have a great shop.

[@RSTechALO]

Great to hear... I know I am loving my setup... If you're like me, it makes working on project much more enjoyable!

[@kenty2831]

Well thought out and executed. The french cleats with the open space is refreshing and welcoming. The tip to leave an open space in the shelving for packing and unpacking is helpful. As the year comes to a close, and I discard old parts and tools, the space to organize and spread out supplies on the fly makes life more pleasant, I give myself time and room to enjoy the process. Hoping to graduate from sharpie marker on blue painted tape to a label maker this year. All the best of health to your family in the coming year.

[@RSTechALO]

It is so nice to have a bright place to work. and where I don't have to dig thru tool boxes to find things... Sounds like you are heading down the right path as well! The best to you and your family as well!

[@crispindry]

Excellent advice. Lots of great ideas! You didn't mention it but the little corner brace for storing long things vertically is a brilliant little feature I'll be using.

[@RSTechALO]

Thanks for your feedback. Yeah, I had all these "pole type things" I needed to put somewhere, and had some extra wood from the house build so I thought what the heck. Appreciate your feedback!!

[@chuckbrown5035]

Great video! We’re getting ready to build a new house. After 57 years I’m finally getting my dream garage. Going to incorporate several of your tips!!!!

[@RSTechALO]

Sounds very familiar….41 years here… it’s so nice to have a space like this I can use a time of the day…. Any time of the year! Enjoy!!

[@SeanODonnell70]

Thank you for sharing your pearls of wisdom. I loved the ideas and your presentation of them!

[@RSTechALO]

Thanks for the kind words.... The setup has been as great as it appears in the video. I'm new to all this KZbin "stuff"... hopefully, I'll get more used to doing this type of thing!

[@robthewaywardwoodworker9956]

Great space with lots of versatility. Well done!

[@RSTechALO]

Thank you for your kind words. It is a great place for me and my projects.

[@ern48]

Great tips! In my shop I built I set all of the outlets at 48" high and then every 48" on 3) 20a breakers, even though everyone thought it was over kill it was not because I always had an outlet handy.

[@JasterMereel421]

You and I have very, very similar garages. Of your 8 tips, I think I've implemented at least 6 of them in mine.

[@RSTechALO]

Isn't it nice to have a bright, open, and organized space? The best to you this holiday season!

[@pekeesee]

I’m in Texas and I added a mini split that helps with air conditioning and heating. The air conditioning is more needed than the heating, but it’s great to be able to do both.

[@RSTechALO]

Smart! My parents lived in TX during their senior years, and my sisters still live there (Longview & Lubbock). The times we visited in the Summer were so hot! The AC would be a must for me as well if I were down south!

[@ednowliniii]

Building a two car shop now. Same thought process in my build… lighting, coated floor, outlets every 5’ on three circuits, and a mini split (I’m in NC and deal with more hot days than cold). working now on mobile bench and cleats. You gave me a few more ideas I hadn’t thought of like storage and storage accessibility, as well as motion light. Nice shop, and thanks for the tips.

[@RSTechALO]

Thanks for your feedback! Are you building the shop, or having someone build it for you? Our build was the 1st time I could "start from scratch" and make it as I wanted.... it was exciting to see it finally come to fruition. I am sure yours will be fantastic too!

[@ednowliniii]

@@RSTechALO the shop was a former detached garage built in the 70's. I gutted it to the studs myself, and spent the past two years slowly redoing everything. l've watched dozens of videos so l would leave no stone left unturned. Lots of areat ideas from many guys to add to my project. Can't wait till it's finished.

[@RSTechALO]

Wow… That makes it even more special knowing that you pulled it all together. Congratulations… I know you’ll love it.

[@bobbymann2225]

Pretty cool! ❤

[@RSTechALO]

Thanks.... I'm loving having this.. esp. now with Winter setting in!

[@BoDean52]

Can you travel to Michigan and do my garage? 😂 looks great

[@RSTechALO]

LOL! Are you in the UP? I usually make at least one winter trip up North for some snowshoeing... seriously, the hard work was done by the construction company! Thanks for commenting! I do appreciate it!

[@harrycraviotto2375]

You did a great job! A few suggestions, stainless steel sink, shelf’s in garage put them on wheels, I have a 3 ton heat pump and it is to set to 60° and I get air conditioning and heating which is very nice and I don’t have to worry about any temperature control. Lots of good ideas about your scrap wood and building a bin for it on wheels. Great idea. Very nice set up, thanks.

[@RSTechALO]

Thank you for the kind words! Yes, I agree about shelves being on wheels... which I had them. But I opted for the plastic white shelves - less expensive than the metal shelves on wheels... At least with the totes, I can remove them, and easily move the shelves... As for the Heating & Cooling, I was just thankful for heat during the winter!!! 😎

[@flyguy30263]

Gorgeous garage and work shop. Excellent video.

[@RSTechALO]

Very greatly appreciate your comments... This KZbin world, and making videos is awfully foreign to me, esp. being almost 72. But its been alot of fun trying to learn! As for the garage, I am awfully proud of how it has worked out... it truly is a dream space for me and my projects... Happy New Year to you!

[@MrJohnnyboyrebel]

I have a couple of adjustments for tip 1 and 2. Epoxy floors are fine, but don’t put down the little sprinkles as it makes finding dropped items very difficult. Add an anti-slip compound too. 2) stagger the outlet circuits so that two adjacent outlets are on different circuit breakers. Consider using 12ga wire so that the circuits are 20 amps rather than 15 amps on 14ga wire. Drop in a couple of 240v outlets as well.

[@RSTechALO]

Totally agree with you on "the sprinkles". I have had to get down on my knees and look around/feel around to find the small dropped items. The other aspect I didn't mention was if you do add sprinkles, use the small one... the Bigger ones cause more issues with sweeping up fine dust. Yes, if I were planning on adding additional power equipment needing the additional amperage, you're spot on. Being in my 70's, I doubt that I will expand my inventory to that level. Heck, I have alot to learn on the tools I currently have!!😎

[@robertbrady3783]

With the staggered outlet circuits, put each breaker on a separate phase. you could then use an adapter that plugs into two outlets to create a portable 240v outlet.

[@LindBrosRacingLLC]

@@robertbrady3783 Great idea! I am a novice woodworker, so the thought of needing 240v hadn't crossed my mind. But it is a great idea to consider when building new. Thanks for sharing!

[@EricWansong]

Very well done. Great tips. Thank you.

[@RSTechALO]

@@EricWansong thank you Eric… That’s greatly appreciated. Glad you enjoyed it.

[@tyzndattic]

Fantastic. Thanks

[@RSTechALO]

Thank you for taking the time to watch! The best to you in '25!

[@richardmonson8657]

Huge thanks…..have been struggling big time on how to improve my “rats nest.” Lighting, french cleats and clear totes with labels are key takeaways that I can accomplish. I still have to overcome retaining thousands of things I suspect you throw out if they are not placed in a tote. A product of depression era parents I keep anything with any shred of potential purpose or value. When needed I either forget I have retained it or can’t find it…so not sure why I do it. Secondly, the width and breadth of my hobbies means my smaller than yours garage is also the go to storage site. Some really great advice in the mean time….Thanks again.

[@RSTechALO]

Thanks for the comment! And I can completely relate. Had it not been for the fact that we had to "downsize" when moving from our old house to our new one, I'd be in the same position. I must have had 2 dozen jars of hardware accumulated over the years, along with wood, pipes, tubing, tools, etc. All those things you "know" you will use someday. The move caused me to toss/donate/give to friends things I didn't see using at our new house. I also think, being now in my 70's, some of those "projects" I said I'd take on someday were no longer in my plans. We are fortunate that we were able to build a new home "as we wanted it".... It is SO NICE to be able to walk out into an attached garage that is comfortable, well lit, and clean. Makes working on projects more enjoyable! Have a great 2025!

[@kevinshea4353]

Very nice shop and some great tips!!

[@RSTechALO]

Thanks! I appreciate the feedback

[@markoda2120]

I love this video. Great timing as we just moved into a place with a 1500 square foot shop and I need to organize it. I will be using a lot of your suggestions and the floor is a good place to start as I can do it before too many things are moved in. I have already started "over lighting" the shop. The previous owner relied on 4' fluorescent fixtures. I have started changing/adding 8' LED lights.

[@RSTechALO]

Thanks for the kind words! Yeah, it was hard when we spec'd out our new home to add in these "creature features", knowing we were trying to be frugal with our money. But I/we are so glad we made the garage space big, bright and clean. Being a retired engineer, being organized and clean just are part of my MO... probably the only good attribute I have! 😎 Your 1,500 sq ft sounds amazing! When you are done organizing and relighting, can you send me some picts? The best to in '25!

[@jerrybrown66]

Did you insulate behind your OSB panels?

[@RSTechALO]

Yes, those were walls to the exterior of the house. So we made sure they were insulated. The sheet rocked walls are up against the rest of the house.

[@JoeCharrier]

Looks neat, clean and a great place to work in !!

[@RSTechALO]

It is... make me more interested in working on projects than at our old detached garage (without heat!). Thanks for the feedback!

[@robertkerby2581]

Great video and excellent tips for an organized garage workshop! Well done, Sir!

[@RSTechALO]

Thanks Robert... I really appreciate the feedback... hopefully, they will get better, now that I have the 1st one out of the way!🙂

[@Headdancer1]

I wish you had made this three years ago. I built a 2400 sq ft workshop and did even think about coating the concrete. No I hav evil stains, paint, wood stain and not to mention saw dust despite my best attempts to efforts to keep it clean. Great advice!

[@RSTechALO]

I know what you mean… I went one year before I had ours done. At the time of the bill I didn’t wanna spend the money. However, it was probably good to wait a year so the concrete cured another year. They do great work and cleaning floors before they coat, so you still have a chance!

[@j74snook]

Fantastic tips sir. Everything is stuff we all have dealt with and you got the good fix for them

[@RSTechALO]

Mondays for the feedback. It is a great to work in

[@keithbartenhagen6306]

You are an inspiration! I am retiring in a few months and will be moving north and will have a separate single bay garage to make into my workshop. Mostly woodworking and some welding/motor work. Lot's of great ideas. I plan to put in a mini-split like I have in Texas. Cools and heats for year round comfort. I like the hose bib idea. Thanks for taking the time to make and post the video.

[@RSTechALO]

Thanks Keith! I really appreciate your kind words! I'm excited for you and your workshop creation. I must say, having a clean, well lit, organized and "warm in the Winter" workshop is truly a motivator to work out there... Prior to this build, I rarely washed my own cars. Last winter I probably washed our two cars 10-15 times! Best of luck to you!

[@Larry-wc2zr]

Thanks. Because of a stroke, I moved to a one level house. This is very helpful for my workshop.

[@RSTechALO]

We built ours as a "zero entry" home. So as we age, no steps entering or exiting... Of course we have a lower level accessible by steps.... But essentials (washer & dryer, bedroom, living space, and garage) have no steps... LOVE IT!!!

[@tamarasnodgrass4232]

Great garage and great ideas

[@RSTechALO]

Thanks!. I appreciate it!

[@Ted_James]

Excellent tips! All great ideas. A little jealous of your garage space...

[@RSTechALO]

Thanks Ted... Yes, I'm awfully lucky that we could build our new house, and give me a "clean slate" to design my garage space and workshop from scratch!

[@jvarblaze7495]

Great tips. Beautiful workshop!!!

[@RSTechALO]

Thanks! Its a joy to "work on things" in this garage compared to our old detached garage, esp. during the winters in Iowa!

[@jamesdannelly6760]

Well one thing is for sure I'm envious! Great tips! My wife and I building single level to start with and ADA doorways.

[@RSTechALO]

Great decision! That was the 1st "must" my wife and I identified for building our new house. The best decision we made! (May keep us out of the assisted living facilities a "few more years"! Enjoy the build - its quite an experience!

[@montefordham6425]

Great job

[@RSTechALO]

Thanks you! I appreciate that!

[@tomiossi8092]

Very nice.

[@RSTechALO]

Thanks... I appreciate the feedback!

[@mnolanco5599]

Nice garage and good tips. Two things you might add. Gorilla racks with wheels for your shelves with totes so you can roll the whole rack out of the way. Battery holder for the tool batteries. I have Makita batteries and have ll ten batteries in the click in holders on two 2 x 6’s mounted right near the chargers. I like the way you mounted the chargers!

[@RSTechALO]

Thanks for the ideas! I debated about "rollable shelves" for my garage storage, but nixed it when I saw the difference in price....The other issue was that due to the slight slope on the floor (for water to drain to the floor drain), my current shelves are shimmed slightly to be level (and look right). With the wheeled ones, shimming gets a bit trickier. With these shelves being light, and having things in tubes, moving them and the "stuff" on them isn't too much extra work As the the batteries, I am looking for a better solution. I want to build a companion french cleat battery holder that I can place below the chargers.... I just need to bite the bullet and buy some of those 3D printed click in holders. Thanks for the motivation to get back on that! Happy Holidays to you and your family!

[@jerryford8385]

Nice shop! I’m in the middle of redoing my shop areas. I did the exact same thing with the lights and plugs. Also putting up French cleats throughout my 2 adjoining shops. I also put up painted white plywood over my drywall. Same idea. I like your extension cord reels up on the ceiling. I’ll be the same.

[@RSTechALO]

You're gonna be glad you did! Enjoy!

[@fritz4345]

What a great workspace/garage. The simple tip of keeping a empty shelf space is somewhat genius.

[@RSTechALO]

Thanks! You know, after carrying totes over to my worktable a bazillion times, the empty shelf space finally dawned on me!

[@TrepedatiousTrex]

I had learned this one thing from my great grandfather way way back, he has a 2 story shop with a chain hoist, was a nice brick and beam place. He was really meticulous, but also made do with what he had and always had a empty space at waist or higher height per 2 5 level shelving units and that ensured he didn’t have to go far to go through containers. His labels were white gaff tape and marker but it worked!

[@RSTechALO]

​@@TrepedatiousTrex Sounds like my kind of person!

[@jonathanblum2994]

Super useful, concise advice, agree with every single tip. Great video. Love the extension chord in the middle of the ceiling.

[@RSTechALO]

Thanks... I really appreciate the feedback!

[@petem6291]

You do nice work that is a beautiful garage

[@RSTechALO]

Thanks!

[@bill_de7206]

Great video, so helpful and perfect timing for me.

[@RSTechALO]

Thanks Bill... Appreciate your time in watching! Sounds like you are taking on a new or refurbished garage/workshop? Enjoy the ride! And when you come to decision making, remember, there may never be a better time to make the change!

[@TylerDickey1]

Lovely and practical ideas! Thanks for sharing.

[@RSTechALO]

Thanks for the feedback! Just getting started in the KZbin world, and thought my experiences in building my garage and workshop would be helpful to others..

[@PaulTasillo]

Your ideas are fantastic: Practical and FORWARD THINKING. Thanks for the TOUR at the conclusion, which put all your ideas in perspective. I might suggest using a WIFI enabled thermostat for the HOT DAWG heater. This would allow you to turn the heater on, while finishing watching the football game, ten minutes before entering the workshop.Better yet, if you leave the house and need to adjust the heater while you are gone, it is always an easy. convenient task. When we go away for a few weeks, we lower the house heat, but we always turn our furnace on a few hours before we get back home. You can manage comfortable workshop temperatures this way, also.

[@RSTechALO]

I like your idea.... I'm going to check the wiring, and see if it is adaptable! I hope the release another video this afternoon sharing some tech enhancements I have in my garage and workshop. (Similar thinking to your wifi enable thermostat) Thanks for you comments!!

[@OzMan9989]

Beautiful space.

[@RSTechALO]

Thanks! Having a space like this to work on things gives me more motivation to do it... (even washing cars)!

[@RSTechALO]

There is a ceiling mounted space heater. I had a gas line run to the garage as well as to the furnace, water heater and the fireplace in the house. The walls that are not common with the house are insulated. The garage door panels are insulated, and each door has the vinyl weatherstrip panels along the sides and across the top.

[@edwilliams4793]

Wired by buddy’s shop, You can stand a new pencil on end on any bench in the shop and no shadow! Life is good!

[@RSTechALO]

Sweet! Yeah, I should have included lights above the area where the garage doors sit while open... but hey, it is so much better than what I was used to! You did your buddy's shop right!

[@JohnHauck]

We must be related. We built a new house with X-large 3-bay garage plus a stand alone 25’x 25’shop with most of the same tips you offer. More tips to add: I put in 240 outlets in garage (future EV charger) and shop; also hot and cold soft water hose bibs near garage and patio for washing cars and pets. Still building mobil shop tables 0:04 and tools. Like French cleats vs peg board idea. 0:04

[@RSTechALO]

Thanks for the suggestions.. I only have cold water bib in the garage, but since I would be washing in the warm garage, I figured cold water was enough... Maybe someday, I'll have the need for 340v... fortunately, my electrical service is on the exterior wall to my garage!

[@mikeforster8798]

Great shop ideas. I enjoyed seeing your shop. I like the wood wall tip but where I live the code specifies sheet rock throughout the garage because of the fire risk from cars. But your garage is very nice!

[@timhalleran3514]

Great shop!!! Thanks!

[@RSTechALO]

Thank Tim! So nice to have the layout I have!

[@mustgofaster6545]

Beautiful garage/shop. If I’m not mistaken, the wall between the garage and the house need to act as a firebreak. Therefore, you should replace the drywall that was removed when the plumber installed the hose bib.

[@RSTechALO]

The plumber cut out a 1' x 1' opening in the sheet rock to make the connection to the existing plumbing. He then reinstalled the cut out piece (less the hole for the hose bib). I then placed a Fiberglass Reinforced Plastic panel on the wall to make cleaning splatters easier than from a painted sheet rock wall.

[@LTDan-pk3mx]

WOW I read through every comment... and if anything really sticks out about you're video is that yall commented back to Everyone's comments... Unlike some of the Yalltube superstars who.. Obviously have a trillion subs.. True, ive asked some of them things like.. Awesome video, where did you procure______ and Nothing but crickets, but they will answer only the ones that "Praise them"(and ps They BEG for subs/likes)... So my friend my hat is totally off to you and you're amazing video and shop build, yall are as organic and humble as they come!!! Gods Blessings on ya!!!

[@LindBrosRacingLLC]

Man, you made my day! Thank you for your kind words! I started KZbin basically to share the things I have learned over the decades, and to share some of the neat videos I have taken with my new drone.... Stepping into this KZbin world is kinda crazy. Way out of my comfort zone. So I decided to be myself, and share with others in hopes that my tips and experiences will help others. (Wish I had a "body double" for the camera shots, and someone to speak my parts!) Happy New Year to you!

[@JohnHauck]

We must be related. We built a new house with X-large 3-bay garage plus a stand alone 25’x 25’shop. Lots of lights and OSB white painted walls in the shop, heated, sink in utility room, extra outlets. More tips to add: I put in 240 outlets in garage (future EV charger) shop; also hot and cold soft water hose bibs near garage and patio for washing cars and pets. Still building mobil shop tables and tools. Like French cleats vs peg board idea.

[@RSTechALO]

I agree! Yeah, when we sat down to plan the house, I told my wife my areas of interest were the garage, the porch, and the yard. She could do whatever wanted for the rest of the house! I told the designer, I wanted 3 stalls that were big enough for "full size pickups".. so glad I did!. As for the extra 240 power outlets, I also contemplated that.... but I doubt that in my driving lifetime, we'll own one. The good news is that the main power line comes into the house on the side of the garage. So it could be added without a huge amount of work.

[@adamb2619]

Great video and glad I found it!

[@RSTechALO]

Thank you! I wasn't sure people would enjoy this type of info. I appreciate the feedback!

[@1brokenbychrist]

Oh one thing - we garden a lot so we bought an additional matching chest tool box on casters just for our garden hand tools, garden tape, irrigation fixtures, spray nozzles etc.

[@RSTechALO]

I like that idea!

[@davidgalloway9101]

Rick - I already like you. First video of yours and it was well done, you and I think alike!

[@davidgalloway9101]

@AsSimpleAsThatTIPS you did a great job - I’m a CPA by trade but a hands on builder since childhood so it’s fun to see how us detail/process oriented people can get creative in organizing and designing our workspaces. Hope you enjoy it in your retirement!

[@RSTechALO]

I appreciate that.... Just a retired, nerdy senior who likes to help others!

[@WedoweeHandyman]

Still on cruise control wow fantastic

[@RSTechALO]

I am in disbelief at the interest of this video too.... but hey, its kept me motivated to figure out another like this! Thanks for following!

[@dannywilsher4165]

Great shop space! Awesome video, I subbed...

[@RSTechALO]

Most appreciated! Just getting started in this KZbin world!

[@dannywilsher4165]

@@RSTechALO Doing a good job Sir!

[@jamesfish5630]

Wow, nice job! Never understand why anyone would use drywall (worse yet metal roofing panels) on walls. Built my 40x70 cabinet shop 20 yrs ago and most everything you did is how I did mine. Only 1 guy who came in my shop noticed after looking around said "wow, everything in here is on wheels". Yes, that way I can think thru each job ahead of time and stage things for the best flow. Love in floor heating unfortunately po had already built building so installed ir radiant tube which heats floor then radiates up. Also like wire wound timer in parallel with thermostat so don't leave and forget to lower the darn thermostat.

[@RSTechALO]

Wow, 40x70! Nice! Yeah, after living in houses with detached 2 car garages for 40 + years, having a garage/shop area that is big, heated, and most importantly well lit is so nice! The wheels make a huge difference, not only when working on projects, but also when wanting to "hose down the floor and give it a good cleaning. Thanks for sharing!! The best to you in 2025!

[@CanadianParamedic]

Thank you for the great ideas! I'm ordering a motion sensor today!

[@RSTechALO]

You definitely won't regret it! We also put motion sensor light switches just inside our garage, where we hang coats, etc, and in our pantry... both places that, if you are carrying something, no need to flip a switch. These are easily installable anywhere you have a wall light switch.

[@JAVELIN73]

Rick-super helpful tips on how you built your workshop area-I learned so much from this video! Can you provide a link or source for the casters you used under your workbenches? Just discovered your channel and now watching your other videos. Keep up the good work!

[@RSTechALO]

For the coasters, I just went to Amazon. I looked for ones that had the polyurethane coating on them, and were for a heavy duty loads. Then, I picked a size that would raise the table the height that I wanted. Most were either 4 inch diameter or 5 inch diameter. The larger size seem to roll much better on my epoxy floor. Hope that helps…

[@user-bs1lj3kv7h]

Great video and thanks for the tips! I want you as my neighbor!

[@RSTechALO]

LOL! I have one neighbor that says that too!

[@carolsera8055]

love your workbench/ miter and that it is on wheels.. do you have plans or more info on this build?

[@RSTechALO]

Thanks for the comments... As for plans, no, I don't. I do have basic floor plans of the house and garage, but that's it... If you have any specific questions, please feel free to contact me directly~!

[@johnhubbard6262]

Whole heartedly agree with mass quantities of outlets (drywallers hate me) but I run all shops with 20 amp versus 15

[@RSTechALO]

Its like storage space, you always never seem to have enough. I now wish I had one over my work table/tool chest. I'll probably reposition my extension cord reel on the ceiling closer to that work area.

[@daphoneguy934]

Mini split for heat and a/c.

[@RSTechALO]

Sounds perfect for the southern regions... here in Iowa, my garage doors open provide me enough air movement (and being out of the sun) to be comfortable...

[@BamaBreeze]

Excellent video. How large is the workshop area? Hoping to build my shop early 2025. Definitely will incorporate your ideas. Everything on wheels is a smart way to go. Thanks.

[@RSTechALO]

The depth is 29 ft; only 27-1/2' from garage door to sink wall. The garage width for the workshop side is 16'. The other 2 stalls combine has a width of 26'. Their length is ~ 16-1/2'. I told them I wanted 3 stalls that would hold a full size pickup in each, and in the workshop stall, I wanted them to add a bit of extra length....

[@BamaBreeze]

Thank you!

[@georgequalls5043]

I am in shock. No garage/workshop can be that clean and organized. It’s impossible.😮

[@RSTechALO]

LOL.... You're not the 1st person to tell me that! The reality is that I am one of those freaks that likes stuff organized and clean (probably from my years of engineering discipline). That, and I am not always "woodworking"... But, I do alot of misc. projects in the garage. I always make sure that at the end of the day, everything is cleaned up, or at least arranged in a way to allow access in and around the garage until I get back at the project. You know, after spending all this $$ to make the place like I want it, I sure as heck am going to make sure it stays nice! That, and I have alot more interest in starting projects when the workspace is clean and organized.

[@georgequalls5043]

You realize that is not normal.

[@RSTechALO]

@@georgequalls5043 Maybe not, but it was the way I was raised and have lived my 70+ years of life.

[@RigSMP100]

You glossed over the floor drain was just put in at the time the house was built? Are there tips for retrofitting and floor drain before you get it epoxy coated? And can you add to the slope of the floor during the coding process so that it drains better.????

[@RSTechALO]

Thanks for the comment. Don't think I can be of much help on your questions. I cannot think of a way to change the slope of the floor. But I use a couple floor squeegees to push the water toward the drain. That might be your only alternative with an existing floor. But for $40, its a pretty good alternative. There is a slight slope in my concrete floor, but it only helps when there's alot of water. Once I am done washing a car, or cleaning he floor, I always use the squeegee move 95% of the water to the drain.

[@lancomedic]

Hi, what are those tool holders in your tool chest?

[@RSTechALO]

Those are "Toolbox Widgets" toolboxwidget.com/collections/tool-organizers?tw_source=google&tw_adid=&tw_campaign=20732203675&gad_source=1&gclid=Cj0KCQiAgJa6BhCOARIsAMiL7V__wC8v7S-rC7pFXXa2qe1HsXFJ511cAZ74HyDmoIn9L-ojIWHW0qkaAnJrEALw_wcB

[@wackowacko8931]

Tip 4 - Walls adjoining the house living area per code have to use drywall for walls because it is fire rated and OSB is not. If you want to be able to put a screw anywhere, put up OSB and then drywall over the top of that so it has a fire rated surface on top.

[@RSTechALO]

Yes, that is how ours is...drywall on the walls between the garage and the living portion of our house.

[@Hazan1fan]

Speaking of “making everything movable”, you get get garbage pail dolly for your garbage. Makes clean up easier when you can wheel the garbage pail to your mess

[@RSTechALO]

Great idea!

[@jasnapon]

Great garage but I'd put some of that stuff out in a nice big shed 🤔

[@RSTechALO]

I hear ya.. when we built the house, I talked about a storage shed out in the back part of the lot. But, between HOA requirements, and not wanting to have to walk to the shed in the back of the lot (3/4 acres) to get out a shovel, or the mower, etc. I decided to make the space big enough to keep all together..

[@zone4garlicfarm]

I wouldn't put one of those space heaters in a new garage.They blow dust all over everything. If I was building a new garage I would have hydronic radiant heat in the floor. I would consider having a second loop in the driveway just outside the door to melt the snow and ice from that area.

[@RSTechALO]

It has not been an issue for me.

[@jameskaiser1069]

Any specific recommendation for wheels for your workbenches both locking and regular. Link would be helpful.

[@RSTechALO]

HI James.... I primarily used 4" diameter swivel wheels with locking brakes. I do have a couple sets of 5" dia. wheels, I ordered those to adapt an existing workbench to be at a similar height as my newly built workbenches. Here's a link to a type I purchased from Amazon - www.amazon.com/gp/product/B091HCSZJ7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Nothing special about this company. They had a good price... The other things, beside locking brakes, I made sure they were "heavy duty" and had the polyurethane wheels. That works much better than hard plastic or steel on my epoxy coated floor. Hope that helps!

[@jimaspinii7579]

You mentioned snow and salt…I assume that means you live in a colder climate. How do you deal with freezing pipes in your laundry room outside wall and the new sink in the garage? I’m in Michigan so it made me curious. Thanks for a well thought out and organized video! …ok, that’s what I get for typing my question before you told about you heating the garage. How expensive is that?

[@RSTechALO]

Good question... a couple things.. 1st, the wall that the hose bib and sink are on backs up to our laundry room... Basically, that wall (next to the door that goes into the house), and the walls in front of the cars are all walls to the interior of the house. The side wall of the shop (where the tools are hanging), and the wall with the wood and yard tools are exterior walls. So, long answer to your question - the plumbing is in an internal wall. Also, with the heater on the ceiling, I typically keep the garage at least 40-45 deg in the winter. So any snow and ice on the vehicles will melt... many times I'll bump it to 50 (and even higher when I am working out there). The insulations does a great job of keeping the garage temp considerably warmer than the outside temp.

[@jimaspinii7579]

@ Thanks! That helps my brain clear up!

[@JR-yr8xm]

What thickness did you pick to use for your OSB walls? I'm in the process of cleaning and redoing my garage and I've wanted to use OSB for a while now.

[@RSTechALO]

Looks like it's 1/2". That works great.. the one thing I ran into hanging things on it, was to make sure you have "fully" threaded fastener/hooks (eg. no portions without threads)... I had a couple mounting situations where the threads went in deep enough that the unthreaded portion was in the wood, so no thread engagement. But that was my error.. I learned to pay attention to the hardware I was using!

[@JR-yr8xm]

@RickSmithALO Awesome. Thank you.

[@theoriginalmonstermaker]

AMENDMENTS: #2 Floors: add adequate (excessive!) drainage! Access to water everywhere and extra faucets and laundry tub sinks help too (dog washing station?) #3 Electrical: Having a million outlets in every possibly location is great, but useless if the breaker pops everytime you use them; spread outlets amongst as many high amperage circuits as possible. #8 Heating: Along with the propane heater hanging from the ceiling, you may as well build in other major systems you'll need, dependant on your interests. Dust collection for wood working, maybe hoist for automotive, air lines running to compressor, speakers, etc.

[@RSTechALO]

Great insights! I do have a floor drain in the garage, for the drainage and floor cleaning. As for electrical, I don't have any high amperage equipment in my garage. But for the professional workshop equipment, you're right on! My more pressing need is access to an outlet(s) to avoid extension cords as much as possible. Your suggestions for major systems are also right on target. For my "small operations" I built a rollable cart with shop vac and dust collector system, which allows me to move from tool to tool as I use them. The cart also has my pancake air compressor on it as well, making it easy to roll around the shop and the garage (and even out to the driveway) for whenever I need to add air to something. For work on my lawn tractor, and if necessary for my cars, I have a set of ramps, and a low profile floor jack that pretty much handles the work I am willing to tackle (plus I have a friend with an amazing garage for his vintage care, and there's a hoist I can use) 😎 Your recommendations would help make any workshop more effective! Thanks for sharing!

[@bennym1956]

Geez, looks sooo clean like nothing is ever done in there ! Or just newly built. Kinda like a neurotic type person.....nothing outa place. lolol I would want something to work in !

[@RSTechALO]

LOL... well, a combination of both. We built the house new, and moved in the Summer of '22.... I am a bit of a neat freak when it comes to keeping clean and organized (retired engineer).. All the work benches you see, were constructed in the garage, as were some others I did for some friends. But past that, most of the activities are maintenance projects and general work where I need a good workspace... and of course alot of car washing, esp. in the winter.... It definitely helped that we had to down sizefor the move, which resulted in most everything being packed in the totes you see (a bunch more in our basement!)

[@bobs7975]

Is your ceiling Sheetrock or plywood? What’s your recommendation? Also height of outlets?

[@RSTechALO]

The ceiling is sheetrock. I didn't have any plans for mounting anything on the ceiling, so sheetrock was fine with me. For the outlets, the bottom of the outlet is at 4 ft.

[@bobs7975]

@ Thanks

[@rickshelton3396]

Great video with awesome ideas. Thanks for sharing what you've learned along the way!

[@RSTechALO]

Thanks Rick... this is a bit of a new world for me, but I am enjoying the adventure!

[@glennspreeman1634]

One other on outlets, alternate outlets on different breakers.

[@RSTechALO]

Good thought… I doubt if I’ll ever run enough to need separate breakers

[@treylandry7831]

Congrats on retirement with a great shop/garage

[@RSTechALO]

Thanks Trey! Retirement is a great gig!

[@georgea6403]

Great ideas. Only thing missing is a urinal. 😂

[@RSTechALO]

LOL.. I hear ya! I have a "manageable" setup for that - just inside the garage door going into the house is a 1/2 bath! The only downside is that if my shoes are dirty, I have to remove them before going in... .This was a "doable" alternative1

[@mrwilly41]

Tip #10. Have a bunch of extra money sitting around to buy whatever you need😄

[@RSTechALO]

LOL! I should have added that as a "bonus tip"! Hey, isn't that what retirement funds are for?? !😎 Have a great 2025!

[@mrwilly41]

@RSTechALO It sure is! Looks good! Have fun.

[@PatrickMatherne]

Love the guy on the phone while his floor grinding machine is running with no one holding it

[@RSTechALO]

Yeah, I know.. I captured this video using the security cam in the garage. Obviously he didn't see it... or, he's used to doing that while the machine was running on "auto"!

[@KitYeeScott]

I will admit mine is not that nice, but I have actually seen better! Now consider painting (in red) the shape of the tool on the wall so that when you walk around the shop you can easily see which tools are out. Makes it very easy for anyone else working there.

[@RSTechALO]

Oh, I am sure there are much better. As for painting the "tool shadow" for each tool, I considered that. But with the special french cleat hangers I made for each, its pretty clear where the tool(s) need to go... The other consideration is I want to be able to move tools around on the wall as I get other tools..

[@joer5627]

At 70 we are where you were. Going to be tough but it is time to move.

[@RSTechALO]

Yes.. the realities for life.... Question for you... I have been pondering whether I should do a video of our experience... from the time we started talking about downsizing, deciding on building, working with the contractor, going thru the weeks of construction, the financial ups and downs, moving in, and our thoughts AFTERWARDS.....alot to pack in there, but I think I could create something that was 40-60 minutes... think people would benefit from that?

[@garyharper2943]

Mine look just like yours…except nowhere as clean, ever!

[@RSTechALO]

LOL... gotta remember that our house is only 2-1/2 years old. Give me time... I am sure it will start looking a bit more "used" !

[@rickzwolinski]

Too much filler, give us some substance

[@RSTechALO]

Thanks for the feedback!

[@Hoojammyflip]

Wow - amazing - thanks for sharing.