8051 Programming with USBASP - Barebones method

[@planker]

Excellent presentation. I will be following for the 8052 instruction. I'm familiar with Arduino IDE and understand your video. I hope you are still around. Thanks

[@ajaikrishnajm9146]

it is working sir , thank you !!! im able to upload the code in my AT89S52

[@pavankalyanGugulothu]

Can we upload any code brother

[@rahulgaikwad2461]

Its an fruitful blanket explanation for Microcontroller learners

[@antoniosanmartin5462]

Could you help me find a recorder for a microcontroller of the 8051 family, the AT80C5115 from Atmel. Thank you so much. All the best

[@shivamprasad4076]

instead of 0.1 disc, I have a 10nf ceramic capacitor for reset, will it work?

[@doctorn3m024]

yes

[@rakshitabaadkar8355]

does it work?

[@shivamprasad4076]

@@rakshitabaadkar8355 Yes, worked in my case.

[@javierzafra9502]

Hi. I need to program a AT89c2051. Can you help me to create a prpgrammer. I hace a usbasp but I don’t know if I have to do the same as you. Thanks

[@kebabsharif9627]

Hello , can you please show how to program F28069m of Texas Instr.. using usb to serial converter .

[@holdencaulfieldrevuelta6146]

sir what's the difference between usb asp and usb isp.. can we use usbisp sameway as mentioned in this video?

[@swapnil6411]

Is code gets stored in the microcontroller,i.e if all the connections are removed with usbasp and other components (resistors, capacitors,etc.) will it works with real time applications projects

[@StephenKingston]

You still need the power supply, oscillator and its capacitors

[@JOSEPH-us6nn]

What should I ask you? I have AT89S52_24PU and AT89S52_24PI, Not programmable AT89S52_24PI Can't you tell me what's wrong?

[@deeptimaanbanerjee6330]

I am facing a really weird issue... connecting the 22pf capacitors don't work and removing them lets the 89s52 to work. 89s52 seems to be stuck with the capacitors on...

[@mannhansen9337]

Are you sure the caps are 22 pf ? If you are using a breadboard or strip board it will sometimes work without as you say. If the micro starts up then you are good. Check also the power supply.

[@pavankalyanGugulothu]

Sir can i upload any Project code with this method or only led code

[@velsentertainment5409]

In my imported usbasp output volt is 1.6 volt and the progisp software shows programmer cannot be found.Tell me the solution sir

[@kryptocat4240]

How to install driver for usbasp

[@SaravananAL]

Download from here and click install driver protostack.com.au/download/USBasp-win-driver-x86-x64-v3.0.7.zip

[@nersalas7064]

I learn a lot.. nce explained.

[@muzamilsofi3225]

Can i use it to program at89c2051

[@manofmesopotamia7602]

Does this work for stc15f204ea?

[@electronic7979]

Useful video 👍 very good

[@pavankalyanGugulothu]

Can i upload any code with this method sir please reply me

[@bahaalebda41]

Thank you very much for your effort

[@Mr.VinodKumar-e9m]

chip enble program error Progisp with c 0.1uf

[@MKDas]

having Chip enable error.

[@shrikantkoli1995]

Driver is not install... Before using burning software first install USBasp driver...

[@yogeshnewal5068]

please send me the link for download ISP-PRO

[@electronicsideas1361]

which sotware needed for uspasp

[@teejay872]

AVRdude... with minor modification of the Config-File

[@electronicsideas1361]

@@teejay872 can u give me link please. And how to program/read infieon sab c505

[@mohitbhangale8229]

Is it same process for 89c51?

[@teejay872]

No... only the "S" Version. The "C" Version doesn't support serial upload.

[@g-14magnayemaryeunices.24]

can i have the circuit diagram of this?

[@TowfiqAhmed3ELab-Bogura]

can i used this method in AT89S51

[@shrikantkoli1995]

You can...

[@doctorn3m024]

SUPERB sir...

[@PhalanetraHS]

Sir can you please make a video on how to make a video like this?

[@abpccpba]

Accepted practice when asking questions is to ask about a specific part of the video content NOT A TOTALLY DIFFERENT SUBJECT.

[@PhalanetraHS]

@@abpccpba I know my question is no where related to the subject. But I'm interested in video making like this. So I asked... Sorry if I have a posted wrongly.

[@vinodnadoni5047]

Nice explained..

[@skmplanet9591]

Strange to find that the hardcore microcontroller programmers are using windows

[@azwarfareedhasni3413]

Sir, How can we send PIR Sensor Alert (notification) through nodemcu to any mobile?

[@vickysanthosh]

Sir niga cit student than ha

[@kieranj67]

Thank you

[@luisbulek65]

Thanks sir.

[@explorerofeverything1806]

Y 8051 say 8951

[@abhijeet6431]

if we use the readymade kit then it will cost nearly Rs. 800-1200 but this one costs only Rs.500-700 ,cost effective isn't it ? 😂