How thick was the pad...and how many cubic yards of concrete was used!? Great job guys!!
@Harley047 жыл бұрын
Chillin' Canuck that's what I was wondering too, and the load capacity - if only I knew how heavy wheat or other grains were, lookout Google
@karold797 жыл бұрын
IT says it in the intro, 220 yards. You could figure the depth from that.
@Harley047 жыл бұрын
Thanks for the help, I'll ask Google from now on
@karold797 жыл бұрын
I was omw way in to work and kind of in a hurry lol. As a driver/concrete wholesaler (We sell the concrete, not the forming/finishing) Most of the mix designs that we use for bins are rated at 4000 psi, but some guys will pour 3500 psi. As wet as they pour bins, it is generally not nearly that strong. Almost every bin I've poured new in the last couple of years has had an aerated bottom so the grain doesn't even touch the concrete though. Generally apart from the footing most of the bins we pour are 5-6 inches thing, with the footing making up around 1/4 to 1/3 of the total amount of yardage, it varies from contractor to contractor.
@MrSaemichlaus10 жыл бұрын
Pie chart of their progress with the floor right included, jay :D
@ebolufer7 жыл бұрын
Awesome equipment! How many time did you need for pouring the concrete? And how much concrete was poured? What is the maximum linear velocity for the use of the Lighting Strike Screed without losing eficiency in the concrete vibration? Thank you in advance.
@michelangelo25766 жыл бұрын
pretty easy shit when all you have to do is screed it and bullfloat. with the roller on screed pipes and the form there is no skill needed
@industrialsales8787 жыл бұрын
Nice Job ! You Need Mill cut steel for next time Guys. Save money and time.
@BigWesley-qp2bd7 жыл бұрын
Dylan Holbrook u related to marty Holbrook northeast Maryland concrete finishers also
@chadgdry39387 жыл бұрын
thanks for sharing that.. not something I would have seen otherwise...
@tailwheelflier7 жыл бұрын
How bad was the cold joint
@ramprasadbangaru8 жыл бұрын
Amazing coordination in the finishing.
@badlandskid8 жыл бұрын
Impressive. 👏🏽👏🏽👏🏽
@xiamaru6885 жыл бұрын
How much did that cost?
@ScottishNSRailFan7 жыл бұрын
Beautiful job
@millenerosa21617 жыл бұрын
Scottish NS Rail Fan
@millenerosa21617 жыл бұрын
Scottish NS Rail Fan
@polishprick789 жыл бұрын
Damn that's big
@MrBuell017 жыл бұрын
Cold joint?
@zlsadesign50938 жыл бұрын
What music are they using in the first half of this video?
@kurzackd8 жыл бұрын
and the 2nd half
@zlsadesign50938 жыл бұрын
Second half is Sintel - "The Ziggurat"
@zlsadesign50938 жыл бұрын
freemusicarchive.org/music/Jan_Morgenstern/The_Secret_Number/ 07: "A Door Opened"
@miguela.martinez67578 жыл бұрын
ZLSA Design k
@abosalehalazani15597 жыл бұрын
مذههههل
@just1lifexx118 жыл бұрын
how much was the cost?
@smithjenny7217 жыл бұрын
VANflawless flawlessNIXION 自己製造不是更好嗎?
@metheone47 жыл бұрын
Just hand over your bank details and after the work check out whats left ^ ^