*On Fire Welding* Bravo well done, always a pleasure to see another video, thank-you sir for taking the time to bring us along. GOD Bless.
@Swimding3 ай бұрын
Thanks for letting me hang out with you.
@RebuildingScotland3 ай бұрын
I really love your work ethic. There you are, working into the night, with your own lighting rig illuminating the workplace. Most guys would have packed up when the sun went down, but you just carry on, getting the job done. Well done!
@andrewcarlson99292 ай бұрын
This guy works his ass off! Very cool to see. Reminds me of spending thousands of hours in my dad’s shop, welding on farm equipment into the night.
@BruceBoschek3 ай бұрын
Your work is superb as always. That trailer setup with those links is the maddest thing I have seen in a long time. What ´bizarre way to attach those parts. I live in Europe and I cannot imagine that, but it must be reliable. Thanks for letting us take a look. Hope you are having a pleasant and restful Sunday.
@JimGarver-tx8rj3 ай бұрын
I envy your steady hand. I believe that you were born to weld. Great video!
@VetvsWorld3 ай бұрын
I’m always fascinated about how little grinding you need. A lesson I have not yet learned. 🤣 Always enjoy following along with your work dude. ✊🏻✊🏻
@lefty19993 ай бұрын
9 AM Saturday morning here .. perfect timing Greg 😊
@terryperrott99133 ай бұрын
Your videos are are full of good tips,you explain why you do it that way. Those two pieces you replaced ,I've heard those are called dog bones. Another great video .
@guidovera765317 күн бұрын
Excelente Videos...... Gracias x demostar tu Trabajo.
@InCountry69703 ай бұрын
I love the smell of plasma in the morning, thanks Greg.
@89firebird3 ай бұрын
Big fan of your fabricating skills hope to see you get 100,000 subscribers before the end of summer hoorah
@vicchiapetta4166Ай бұрын
That Plasma of yours really gets with the program!! Great job, Greg!!
@terrminatoragain4613 ай бұрын
Nice job Very impressed with your plasma cutter,sure cuts nice
@joehirschegger77233 ай бұрын
Looking forward to seeing the reconfigure job!
@stephenmoody623Ай бұрын
Thankyou , Always enjoy your work and every movie provides asses on heaps to all who watch and follow. Sincerely Steve M Geelong Australia
@MySynthDungeon3 ай бұрын
Morning coffees on!! Here we go! Cheers!;-)!
@petermccuskey18323 ай бұрын
Well thought out and good workmanship. Stay Safe!
@marctrossbach65603 ай бұрын
Nicely done, looking forward to seeing the next modifications
@mikesmith89523 ай бұрын
Good job as always! I wish I could make my jobs go as quickly, 😅 as yours!😊
@JonDingle3 ай бұрын
Top work young man, well done.
@frfrpr3 ай бұрын
Good filming as usual. Thanks for the video
@Apocnow4203 ай бұрын
Another good one. It seems you just keep working until the job is done. But that's what is probably needed to get this equipment back in order.
@ypaulbrown3 ай бұрын
keeping me up all night..........just got done with a one hour welderfabber, but I love my onfire too......
@scotthultin77693 ай бұрын
735 👍's up on fire welding thank you for sharing 😎
@victorjeffers19933 ай бұрын
This seems to be an art to you tge way you can use the plasma cutter to cut or gouge then do the final prep with the grinding wheel an then turn and fabricate what you need even there in the field and then weld it all back together ! Awesome job ! 👍👍
@tomki6asp3 ай бұрын
You are an artist with plasma.
@toddodell29043 ай бұрын
Great job and looks great
@x...CrankyOldMan...x3 ай бұрын
Another great episode. great content.
@cdalton3169Ай бұрын
Love your work! Impressive you can free-hand cut as well as you do!!!
@erikslagter32313 ай бұрын
those plasma cutter & gougers are a real game changer. Imagine having to use a big ol' cutting disk to do the same work?
@Lused13 ай бұрын
Dobrá práce 👍🏻 hezké video. Zdravím z Evropy, z Čech, rád se koukám na vaše videa.
@carloskawasaki6563 ай бұрын
Thank you for sharing, another great job ,I learn a lot 👍👍👍👍
@anxietyislandllc3 ай бұрын
Love your content!!! Keep at it!
@davidholder32073 ай бұрын
You certainly get some unusual work.
@jeffo8813 ай бұрын
Thanks for sharing Greg, I know how that goes together with the two halves of the trailer but the load on that link has to be insane with a bit piece of equipment on it.
@OFW3 ай бұрын
I imagine the load is really high. Would be interesting to measure it.
@sjohnson17763 ай бұрын
Nicely done!!
@glenngosline33033 ай бұрын
Extremely talented
@brandonscarfe88033 ай бұрын
Great stuff as always!
@blister7623 ай бұрын
Hope to see that reconfigure job from start to finish.
@brandon20763 ай бұрын
At your reccomendation i bought some Cubitron II flap discs. They are LIFE CHANGING! I'm using 60 grit 4-1/2 discs on my flexvolt grinder and they just eat. You can feel and hear the cutting action in the grinder, and it makes chips not dust! I've always been frustrated with cheap flap discs just rubbing and making heat and being useless after 5 minutes, but these actually make grinding enjoyable and they work just as good as new until they're worn down to nothing. I'm actually a little bit scared to try the 36 grit haha, my part may just disappear!
@McNeillWelding3 ай бұрын
You the man brother
@johnscheffler15143 ай бұрын
Great job!!
@allen32723 ай бұрын
Got it done my trailer hung low on mount we did some changes to drivers kept putting shims in it to raise it we made ours to change out plate deck rubs on it works better than buying another 290 g trailer
@jaymarshall76323 ай бұрын
Thank you for your Videos!!
@lowboy1one13 ай бұрын
Was that the same trailer that you had the two part video on welding the broken pin bosses and a bunch of other heavy duty stuff? Literally just rewatched that the other day. Keep up the great work!
@OFW3 ай бұрын
Yes it is.
@user-so3ky5sv5b3 ай бұрын
Good work good video. Don't take negative comments seriously. Alll people that can't even swing a hamme.r
@aerialrescuesolutions3277Ай бұрын
Nice circle cutting. Thanks.
@jimsvideos72013 ай бұрын
Nice! I hope you can get some film of the mod job on this trailer too.
@charliewilder93983 ай бұрын
Dang dude. You had a long Friday.
@billcovert34733 ай бұрын
Thanks!
@iainkinsella47083 ай бұрын
Noice!
3 ай бұрын
Bom trabalho amigo perfeito!!! Boa sorte sempre!!!
@Trey4x43 ай бұрын
**Takes a dump behind the tire** "Aaalllllright, thats it for this one, thanks for watchin"
@richardmacleod48783 ай бұрын
Suggestion, not sure if it would work or not. Use hard facing welding on the worn surfaces, then grind it back to size?
@OFW3 ай бұрын
It’s not worth it. They last a long time as is. Plus that might affect the integrity of the T1 steel collars.
@jordanpowell48963 ай бұрын
Hey Greg huge fan of your videos I learn something new everyday from watching you! So thank you for sharing! What suitcase are you running for this project?
@andybennett51853 ай бұрын
Nice work
@sstocker313 ай бұрын
I'm curious why you were doing stitch welding, that material poses no risk of burn through? Great vid, love you're presentation.
@OFW3 ай бұрын
I stitched it in hopes the plate wouldn’t move after being fully welded.
@rudyrivera74263 ай бұрын
👌👍! Thanks for sharing!
@woodartist20213 ай бұрын
Nice temporary repair. How do you determine which scenarios you use plasma gouging vs. Oxy/Acetylene gouging, or carbon arc gouging? Is there a certain criteria or condition of the repair that dictates which you choose to use on a particular job? Thanks Greg!
@OFW3 ай бұрын
Well sometimes you could use anything to remove material. That’s the problem when you have all the options available to you, you just have to choose. I chose plasma when I want to be a little more accurate.
@dirtfarmer74723 ай бұрын
Here I go again with how many hours did it take for you to fix. Now you know that the next time you see this jeep will be when it can’t go any further, the most permanent thing is a temporary repair. Thank you Sir for your efforts
@OFW3 ай бұрын
About 3 hours
@dirtfarmer74723 ай бұрын
@@OFW Thank you Sir
@MLDIYSH2 ай бұрын
@@OFWwell that’s evident you don’t charge per hour 😅
@OFW2 ай бұрын
@@MLDIYSH what ?
@MLDIYSH2 ай бұрын
@@OFWI’m saying that took you 3hrs but I’m damn sure you didn’t charge 3hrs 😂
@arniesand3 ай бұрын
Really enjoy your videos, thanks for taking us along. I have a question. Why do you stitch weld on some areas?
@OFW3 ай бұрын
To keep the plate from moving when welding it.
@billcarlson17303 ай бұрын
Very cool project as usual. Would like to know what wire he was using to weld that? I would still be using a 7018 rod being old school. Thanks for sharing.
@OFW3 ай бұрын
Lincoln 71a75. Basically 7018 in a wire form.
@billcarlson17303 ай бұрын
@@OFW Can a guy get a decent Miller welder/generator that will run that 71A75 for $4000 or under?
@OFW3 ай бұрын
@@billcarlson1730 probably if you shop around.
@tmeincАй бұрын
Really good work with the plasma cutter, thanks. Was building up the worn areas on the links with hard facing considered for this repair?
@OFWАй бұрын
No, it needs to be exact on both sides.
@bmlennox3 ай бұрын
how long do the consumables last when you run the plasma at 105 amps? lots of fire coming from that torch!!!
@OFW3 ай бұрын
They last surprisingly long. You can cut several hundred feet with the same ones.
@bmlennox3 ай бұрын
@@OFW very impressive comet trail! acetylene/oxygen is so pricey now it makes $$$sense to use electrons rather than gas when possible!!!!
@mrlakeside3 ай бұрын
I am working with my 14 year old, I am trying to teach him that this is craftsmanship and a career he could be proud off. In very general terms, about how much would a client pay for a job like this, about how much are your costs / parts and materials. When you do this work over a course of a year can you make a living? Thank you.
@OFW3 ай бұрын
I charged $135 an hour. My cost is about $25 a hour to run this truck. You can definitely make good money if you run the business correctly.
@Hey_Its_That_Guy3 ай бұрын
Nice work, Greg. Honest question: not considering the cost of the equipment, do you think plasma (fuel & consumables) is cheaper to run than oxy (gas)?
@OFW3 ай бұрын
I do think it’s about the same. But plasma has many benefits over a torch. I really only use a torch for heat.
@joshuapaul3493 ай бұрын
Greg the real companies are out late on friday making sure someone has a smooth monday.
@robertsumma91573 ай бұрын
Nice job what wire are you welding with
@OFW3 ай бұрын
Lincoln 71a75
@rbelang83313 ай бұрын
Nice job! Is this dual shied FC wire? I like how fast it goes and how nice the welds look...
@OFW3 ай бұрын
Lincoln 71a75.
@rbelang83313 ай бұрын
@@OFW Thanks.
@jiml99713 ай бұрын
Very nice repair sir. Can you let us know ow what wire you used and type of gas. Thank you
@OFW3 ай бұрын
Lincoln 71a75. 75%argon 25% co2
@2xKTfc3 ай бұрын
Can those big pins be replaced? Looks like might be slid in and welded to the frame all around, sort of like a trailer hitch, but I have no clue how these trailers are built. And are those scaper pans in the background? With these trailers running over dirt on top of doing heavy haul I'm sure they appreciate some love from you :3
@OFW3 ай бұрын
They can be replaced but they are a lot more involved. Luckily these were not wore out.
@sccolbert25 күн бұрын
When you are in the field, how do you decide whether you will stick weld, use the wire feeder, or plug in a separate mig machine? I've seen you do all three across different videos :)
@OFW25 күн бұрын
Depends on the situation, the size of the repair, the wind, and what material it is. Stick is for wind or something really quick and easy. Wire is for anything thin or if I need to do a lot of welding.
@WillfulMirror82 ай бұрын
Do you use Flux core for the mig? I haven't used Flux mig before but by the grinding after each bead that's what leads me to believe that, thanks!
@OFW2 ай бұрын
Yes. Dual shield wire.
@WillfulMirror82 ай бұрын
@OFW thank you, I'm learning as much as I can, we have a mig welder and stick at work that I've been learning on, otherwise I've always done tig for my automotive applications
@neilheriot23613 ай бұрын
Mint👌
@jamesriordan34943 ай бұрын
Righteous
@andrewwhitnet35573 ай бұрын
Great job.I don't think there was enough wear in those collars and pins to cause much sagging.Perhaps the cause is somewhere else.
@JOHN273983 ай бұрын
i like this
@thomaskrenn38083 ай бұрын
👍
@wayneclark70483 ай бұрын
Looks like it was not the first time they were replaced.
@OFW3 ай бұрын
I agree
@aticuss3 ай бұрын
👏👏👏👏
@dalehowe4103Ай бұрын
What electrode are you using and what gas mixture?
@OFWАй бұрын
Lincoln 71a75 75%argon25% co2
@evo-labs3 ай бұрын
Why not drill a hole in the shaft and use a large cotter pin as a retainer so it can be easily replaced again when it wears out?
@OFW3 ай бұрын
I think that would break the pin. I’m just doing it the way the customer wants.
@bodereiss7 күн бұрын
Seems like you like the plasma over the air arc. When do you tend to use one over the other? I assume you are using a Hypertherm?
@OFW7 күн бұрын
Depends on the situation. I do like the plasma. The plasma is better for fine detail when gouging or cutting.
@bodereiss7 күн бұрын
@@OFW thx for the intel. I’ve got the plasma but don’t have the air arc. Just wondering when I’d want to start thinking about the air arc. All I’ve got to run the air arc is the old Miller AC/DC Thunderbolt. So I’d be using the smaller carbon rods
@12Georgia833 ай бұрын
👊
@TheKickstart893 ай бұрын
Have you got to try out that S power yet?
@OFW3 ай бұрын
Not yet.
@TheKickstart893 ай бұрын
@@OFW are you using the 125 or the 105 plasma
@OFW3 ай бұрын
@@TheKickstart89 105.
@daviddemarr77912 ай бұрын
What wire are you using, thanks
@OFW2 ай бұрын
Lincoln 71a75
@mikev.10343 ай бұрын
👍🤙🤘
@paulusmarc3 ай бұрын
Bon Boulo😆😆👍👍
@2xKTfc3 ай бұрын
7:10 the new part has tabs on either side of the long hole. Were those worn off the old part? Holy metal-munching batman!
@OFW3 ай бұрын
I think it’s an updated design.
@pauloneill89123 ай бұрын
that was a mess
@jackdawg45793 ай бұрын
I know its only got to last a couple of months, but it makes me feel nervous, that looks to be a lot less material, than what you took off, supporting the ends of those pins now.
@ShainAndrews3 ай бұрын
Some people are not very good with physics. So instead they judge, and project.
@OFW3 ай бұрын
The piece I put on isn’t really structural. It’s to hold the collars that push on the collars.
@jackdawg45793 ай бұрын
cheers, that makes sense! @@OFW
@theessexhunter13053 ай бұрын
Nice job, just the plasma makes such a mess, a 9" slitting blade leaves a clean face each time.
@OFW3 ай бұрын
A 9” blade sounds dangerous lol. Everyone has their own ways.
@theessexhunter13053 ай бұрын
Still all my fingers toes eyes at 62... You can turn that face as nice and clean 9" slitting blade lol kzbin.infogtfmPEBCcKQ?feature=share @@OFW
@mayhemmayo3 ай бұрын
💥💥💥💥💥💥💥💥💥💥💥💥
@crbrepairmotorcycles66083 ай бұрын
You don't have a heavy 2ft work table to haul around? Instead of using using utility truck bed bumper? Dedicated work into the night run out of work can always go to Texas and build the border wall
@runifuceeme4063 ай бұрын
WHAT KIND OF PLASMA CUTTER DO YOU USE? MAKE AND MODEL?
@OFW3 ай бұрын
Hypertherm powermax 105
@runifuceeme4063 ай бұрын
THATS WHAT I THOUGHT.. PRETTY POWERFUL STUFF.. @@OFW
@1leggeddog3 ай бұрын
I will never NOT be impressed with what a plasma torch can do...
@ShainAndrews3 ай бұрын
Double negative much?
@2xKTfc3 ай бұрын
@@ShainAndrews We don't do no negated double negatives 'round here 😅
@kevinmoore3423 ай бұрын
Why not just hard surface weld the links instead of completely replacing them?
@OFW3 ай бұрын
They need to be exactly the same. That would require them to be welded then machined to spec then installed. It’s cheaper to buy new ones and they last a long time.
@middleway18853 ай бұрын
Boop
@thepubliceye3 ай бұрын
From a liability standpoint, I would have turned that job down.
@SimonCoates3 ай бұрын
From a liability standpoint, I'd be concerned that the specification of the coupling was changed to be weaker than standard. I'm not saying this repair wasn't good, just that if the SHTF you need to be squeaky clean. Maybe any liability ends with the trailer owner/operator and Greg is just doing what is asked of him. BTW his plasma skills are excellent.
@OFW3 ай бұрын
Out of curiosity what part would make you say no? And that’s why I have very good liability insurance.