9 | How To Setup a PA System With 2 x JBL EON715 + 2 x JBL EON718S using Yamaha MG10XU Mixer

[@jblsoundbiz]

Today's video is about how to set up a PA System with 2 x JBL EON715 and 2 x JBL EON718S using a Yamaha MG10XU. Hope you enjoy watching this video. Don't forget to SUBSCRIBE to my channel and please leave a thumbs up on this video. Have a wonderful today! 🤗

[@marvincortez4911]

Where can i buy this jbl, this is available in philippines?

[@jblsoundbiz]

Hi, thanks for your comment, You can refer to the link below; JBL EON715 `````````````````` 1. www.jbl.com.ph/professional/EON715.html?dwvar_EON715_color=Black-GLOBAL-Current&cgid=professional#start=1 2. jblstore.com.ph/products/jbl-eon715-15-inch-powered-public-address-speaker-with-bluetooth-professional-speaker?_pos=3&_sid=c07dafdae&_ss=r JBL EON718S ```````````````````` 1. www.jbl.com.ph/professional/EON718S.html?dwvar_EON718S_color=Black-GLOBAL-Current&cgid=professional#start=1 2. jblstore.com.ph/products/jbl-eon718s-18-inch-powered-public-address-subwoofer-professional-speaker?_pos=4&_sid=c07dafdae&_ss=r If you don't mind, please leave a thumbs up on my video and subscribe to my channel. Take care and have a great day! 🤗

[@Litcentral09]

Thank you for the video bro. I have a RaneOne and I use to hook up my sub and my 2 tops all into that raneone but you showed me a better way of doing it. I have a Yamaha mixer as well so now I know to hook up my tops to my subs and my subs to the woofer . Thank you brotha 🙏🏾🙏🏾

[@jblsoundbiz]

Hi, thanks for your comment bro. I'm glad my video can help you. If you don't mind, please give my video a thumbs up and subscribe to my channel. Take care and have a great day! 🤗

[@joojoobe1]

Super information

[@jblsoundbiz]

Thank you ❤

[@tijae22]

In this setup using the exact same mixer is it better if a laptop is your source going from 3.5 mm to a single or dual Y 1/4?

[@jblsoundbiz]

Hi, thank you for your comment, Good question. Both can be used but many people use the dual Y 1/4 and I am not sure why. Maybe one of the sound engineer who read this comment can explain this. ☺

[@secondAngle]

I'm curious how it is that you go that way from the mixer? Wouldn't it be better if you go from the mixer (L/R) directly into the sub and then distribute from the sub out to the speakers? I mean, why pull two extra wires up/down from floor level when the sub is already on the floor, or doesn't it give the same effect?!?

[@jblsoundbiz]

Hi, thanks for your comment, friend. What I did in this video is actually what is recommended by JBL in the EON 700 Series manual. You can connect from the mixer to the subwoofer and out to the top speakers if you want. ☺

[@hainguyen8610]

How do I connect additional monitor speakers and microphones?

[@jblsoundbiz]

Hello, thanks for your comment. If you want to install monitor speakers, let's say you are using JBL EON712 as a monitor, you can connect a TRS cable from the Yamaha MG10XU Female Stereo Out TRS mixer to the JBL EON712 speaker monitor. You can control the volume of the JBL EON712 using the JBL Pro Connect app. For the microphone, you can plug it into any channel 1 through 4 on the Yamaha MG10XU mixer, and you can control the volume on the mixer. I hope this answers your question. Don't forget to support my KZbin channel by clicking the SUBSCRIBE and LIKE buttons on this video. Thanks and I appreciate it. 🤗

[@hainguyen8610]

@@jblsoundbiz thank you !!

[@daxtonriggle3129]

I have the 2 eon 715 I’m just running the mixer in the speaker itself. How can I hook the 718 subwoofer up without running wires or is that not possible my 715’s are connected through the app and play like a champ but I have no sound coming from the 718

[@jblsoundbiz]

Hi, thank you for your comment. The EON718S cannot play sound without a wired input. You should use the cable from the Pass-Thru EON715 and connect it to the input of the EON718S. I hope I was able to answer your question. Have a great day, friend! 🤗

[@daxtonriggle3129]

@@jblsoundbiz that’s what I was thinking I just wanted to make sure I’m a newbie 😂 thanks for the help🤙🏻

[@jblsoundbiz]

@@daxtonriggle3129 It's okay, friend. I am happy to help 🤗

[@billywilson303]

SO you need to have a degree to use these as mains for a band. I am taking mine back to Guitar center tomorrow

[@Litcentral09]

If I got a prx918xfl what should I set the parametric EQ to ? Custom, flat, 80hz, 100hz, 120hz or cardioid ?

[@jblsoundbiz]

Hi, thanks for your comment. It depends on what you want to pair with the top speakers (HPF-SPKR and LPF-Mix Out). For example, if you set the top speaker with HPF to 80hz and LPF to 120hz, then the subwoofer's Parametric EQ can be set between 120hz to 80hz. If you want to use Cardioid EQ, you must have two subwoofers and place them next to each other. Subwoofer 1 (facing the audience) is set to 100hz and subwoofer 2 (rear facing) is set to Cardioid EQ. You can watch this video on how to set up a Cardioid mode subwoofer. kzbin.info/www/bejne/nmOZepl8m7qEg7s I hope I can answer your question. Thank you very much for your support of this channel (SUBSCRIBE and LIKE). I appreciate it. Have a great day my friend! 🤗

[@Litcentral09]

Thank you for answering. Here is an example of my set up on the left side I have a Prx15 speaker with a PRX18XFL sub . On the right side I have a eon718s and a Eon715 speaker. Now the eon speakers I followed your tutorial from the video to set those up.

[@Litcentral09]

Oh yea I also figured out how to group the speakers thank you 👌🏾

[@Litcentral09]

Also in the future can you do some videos on the 900series ?

[@jblsoundbiz]

@@Litcentral09 Nice! Well done my friend! 👏👍

[@ALEXJACK-w1f]

What is this reggae beat I love it

[@Litcentral09]

How did you group them ?

[@jblsoundbiz]

Hello, my friend. Good question! It's hard to explain here. I will make a tutorial video about your question in the next video. So stay tuned my friend ! 🤗

[@RafaelUnplugged]

There's an icon on the top right corner it's the "chain" On ipad Setup / House icon on the right side Then top rightnis a lock, location, chain icon. Hit chain

[@metanoiax2130]

have you tried maxing it out? did it reach atleast 110db without limiting?

[@jblsoundbiz]

Hi, Thanks for your comment, I have never measured sound volume up to 110db with an SPL meter. However, I am sure that the limit light will not come out even if the sound has reached 110db. Maybe in the next video, I will measure up to 110db for a PA system setup like this. Don't forget to support my KZbin channel by clicking the SUBSCRIBE and LIKE buttons on this video. Thank you and I appreciate it. Have a nice day! 🤗

[@metanoiax2130]

@@jblsoundbiz thanks for the reply! Definitely gonna check your video out, subscribed!

[@MiswarSaputraBurhan]

How to set up 4 PA 15, 4 Subwoofer ? 🙏🏻

[@jblsoundbiz]

Hi, thank you for your comment. This is a good question. You can try to install a PA system by using the four methods below. Method 1. Using four EON718S subwoofers in cardioid position and placed in the center facing the audience while the EON715 position is placed left and right (2 left & 2 right). Method 2. Using two EON718S subwoofers in a cardioid position placed on the left and right together with the EON715 (2 tops + 2 subs on the left and 2 tops + 2 subs on the right). Method 3. Using the two EON718S subwoofers not in cardioid position placed on the left and right together with the EON715 (2 tops + 2 subs on the left and 2 tops + 2 subs on the right). Method 4 Uses two subwoofers in cardioid position and placed in the center facing the audience while 1 subwoofer is placed on the left and 1 subwoofer is placed on the right together with the EON715. However, the method of installation of this PA system depends on the location and atmosphere of the event at your venue. You can choose any of the above methods and I will explain how to connect the cables from the mixer to all the speakers. Please support my KZbin channel by subscribing and clicking the LIKE button on this video. Thank you and have a great day! 🤗

[@MiswarSaputraBurhan]

@@jblsoundbiz 🙌🏻🙌🏻🙌🏻

[@Litcentral09]

I got a question. When I’m playing music sometimes and I turn the volume up I start hearing a little bit of popping in my speakers do you know what that can possibly mean? It really only happens when certain songs got some good bass to it. It don’t matter how low the volume or how high. The limit light don’t even come on

[@jblsoundbiz]

Hi, Thank you for your comment. This has happened to my JBL EON715 speakers. When the music starts playing, a POP sound is heard and then disappears as the music plays. However, not all the songs I play have a POP sound. I am not sure what is causing the POP sound. The only thing I could do at that point was make sure all the XLR connections from the mixer to the speakers were securely connected with no loose wires. I also updated the firmware to the latest version. So far I haven't heard the POP sound. I hope this answer helps you a bit. Have a good day my friend! 🤗

[@Litcentral09]

@@jblsoundbiz thanks bro I’ll try that. Do you think turning the DB gain up in the settings will help?

[@jblsoundbiz]

@@Litcentral09 I don't think so. Maybe you could try setting the EQ to flat first and then slowly turn up the volume fader and see if the pop sound still comes out. 😊

[@Litcentral09]

Yea I tried putting it on flat and it’s still doing that. I’m thinking maybe it’s time for a new speaker.

[@jblsoundbiz]

Hello friend, Can you play a song that has a "pop sound" using Bluetooth from your PC? and set the EQ to flat on that speaker. I wonder if the problem is still the same.

[@Toyrapy]

Hi, thanks for your awesome video. I have 2 EON 715 + EON 718S, and mixer MackieProFxv3+. Both speakers and mixer are bluetooth, should I send music from my computer to the speaker or to the mixer. And your advice on the best way to run minimal cables between the units so that I can utilize the wireless bluetooth function please. (Setup intention is for Karaoke). Thank you!!!

[@abregadoatseri4974]

Hi, I was Wondering for 250-400 people, what speaker and subwoofer would be good,? Also if i buy the same as shown in video will it work with my stagePro SP1 mixer? And is passive speaker better or Active or it doesnt matter? I know i asked lots of questions 😅, cause I cant find any answer to those questions , thank you

[@jblsoundbiz]

Hi, thanks for your comment. Q: I was Wondering for 250-400 people, what speaker and subwoofer would be good,? A: You can try two JBL EON715 and two JBL EON718S as shown in this video. Q: Also if i buy the same as shown in video will it work with my stagePro SP1 mixer? A: Yes, of course. Q: Is passive speaker better or Active or it doesnt matter? A: Both these types of speakers are good but it depends on your budget and how easy it is for you to set up a PA System. Q: I know i asked lots of questions 😅, cause I cant find any answer to those questions A: I understand because I used to be like you do research and answer before buying any audio equipment. Don't worry, I'm happy to answer all your questions.🤗 If you don't mind, please give my video a thumbs up and subscribe to my channel. Take care and have a great day! 🤗

[@koilpul-lq7bm]

Bro I have need the Sound systems jbl 1.Eon 715. 4 2.yamaha 16 channel mixer 3.podiom micks. 2 4.codeless micks. 2 5.instrument cables. 6 6.xlr cables. 12 7.Aux cables. 2 8.coddid micks. 8 9.mick stand big. 4 10.mike stand small 5 11.slabitizer. 3kvw Auto

[@jblsoundbiz]

Hi, thanks for your comment. I'm not sure what you mean. Can you explain what you mean by that list of audio equipment? Forgive me if I am wrong. 😊

[@arnellorena8563]

I can't connect my 2nd speaker to Bluetooth

[@jblsoundbiz]

Hi, thanks for your comment. May I know which Bluetooth you want to connect? BT Audio Pairing or BT Control Pairing on your second speaker? If you don't mind, please give my video a thumbs up and subscribe to my channel. Take care and have a great day! 🤗

[@bkidtheproducer]

why don't y'all test with trap or hiphop songs

[@jblsoundbiz]

Hi, thanks for your comment. I'll do it in the next video coming soon but I need to find a rap or hip-hop song that doesn't have a Copyright Song. Anyway, thanks for your suggestion. I really appreciated it. I hope you enjoy watching my videos. If you don't mind, please leave a thumbs up on my video and subscribe to my channel. Take care and have a great day! 🤗

[@marlonwilliams4927]

Your going way to fast I can’t follow you, I’m very green. Thanks for the video though