92 Johnson 60 Hp - I Just Can't Catch A Break -1

[@GlenB1963]

Oh man. Hey happy birthday, American brother. 🎉 remember the 2 happiest days in your life... the day you buy a boat, and the day you sell it. Best wishes to you all from Brisbane Queensland Australia 🇦🇺 ❤

[@THISOLDOUTBOARD1]

You got that right! Thanks for tuning in!

[@Dan_Akins]

Starter / frame not grounded. I think the mating surface between starter and case is not good. Try putting a jumper cable between the negative battery post and the starter casing. (I just used a set of jumper cables from my truck) I had this issue with a riding mower.

[@mwatkins2464]

That’s exactly what I was thinking I would do also with the jumper cables 👍🙏

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@joenobles1086]

I still can't believe everyone got evicted after all these years 😪 and Happy Birthday hope it's a great one catch you next time 😊

[@THISOLDOUTBOARD1]

Thanks !

[@Kyle-bb9zp]

OMC awesome outboards

[@THISOLDOUTBOARD1]

Thanks again !

[@wlukew3052]

Shoot Happy Birthday cheers to another. Just thought id let ya know about some of my recent snags. 85' 7.5 merc short shaft for 75$ 83' 7.5 johnson long shaft 75$. 9.9 short shaft johnson 9.9 120$. All of which have minimal hours original cowling seals are MINT! Your boat floor looks impeccable, I know you made a video on it. When I have to do mine I think I will opt for your method. My StarCraft has that same stern light and housing by the way. Always something ain't it.. great grandparents lived in DeLand

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in! Wow sounds good on the outboards! Let me know when you start your floor- Thanks again !

[@TheSteelworker]

Happy Birthday! The last few minutes of your video says it all. When it rains it pours…👍

[@THISOLDOUTBOARD1]

Hey. Thanks ! And thanks for watching to the end!

[@SalvatoreFeudi]

Some days it just ain't worth waking up. Great video and great stick-to-it-ness.

[@THISOLDOUTBOARD1]

You got that right!

[@jasper60103]

Hey. Thanks for the final video at the old homestead. Hope the move goes smoothly. Take care.

[@THISOLDOUTBOARD1]

There's more to come! Stay Tuned!

[@Kyle-bb9zp]

Moving sucks to much stuff and not enough people to help lol

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@lodollar23]

Happy birthday buddy. I kniw you hate moving but you gotta make us a video of "The Beast"! Man I like that thing. Can't wait to see your river fishing adventures!

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@smallengineexpert6607]

How are you doing with this change and how much of a pain the ass is it to run the boats compared to before..always enjoy your clips , friendly and informative!

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@dougr3715]

Happy Birthday

[@THISOLDOUTBOARD1]

Thanks !

[@Thecopperman]

Happy birthday - great video again - I used to think these things only happened to me

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@smokegreen77]

i have a 1996 johnson that's not getting spark to the coils changed the CDI box still no spark any suggestion

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in. Well I'd go after the charge coil under the flywheel first- Always replace the cheap stuff first! And do what I did here- Check all your grounds! making sure they have good contact- and those wire plugs too! You see what I went through with a bad connection at the wire harness plug--- Also look for an OMC service manual specific to your year/model- It has a great troubleshooting section and will save you time & money! Look on ebay for a good used one. Thanks again & Stay tuned!

[@smokegreen77]

@@THISOLDOUTBOARD1 thanks so much man love your vids you have saved me alot of money and time so please keep them coming brother!!!!

[@mwatkins2464]

Can’t wait to see the new fishing spots at the new place. I think you’re going to enjoy it a lot better and the new covered boat dock is going to be nice. Wish I could help with the move. 🎉🙏

[@THISOLDOUTBOARD1]

Thanks !

[@jasonmoore5685]

You should have seen that fish when you was bending over looking at that motor😂

[@THISOLDOUTBOARD1]

Thanks again !

[@melvinrawlings1457]

🎉Happy Birthday to you🎉Happy Birthday to you🎉Happy Birthday dear "This Old Outboard"🎉Happy Birthday to you🎉 Here's to many more to come. Love ya dude❤❤

[@THISOLDOUTBOARD1]

Thank you very much!

[@bolambert6457]

Happy birthday man... I hope all is grand

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@dougaranda6187]

Happy belated birthday!

[@THISOLDOUTBOARD1]

Thanks !

[@RiverRat-2112]

Sounds like one of my days. lol

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@robertrabhudsonhornet5869]

Happy birthday one day early i hope you have a great day i hope you have something fun planned fun to do. It's not a bad starter or the solenoid I would say you either have a bad connection or a bad ground. Cut the ends on that wire and use heatsrink then solder the wires together

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@tronshere]

Happy birthday Donny. Get that ol girl howling so you can explore the new lake. Bbq up a nice steak and have a few beers 🍻 bud.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in! Donny?

[@lakeside5137]

Nice work troubleshooting. I'm betting you replace that plug connection when you get time, but glad it was not something that cost you money. You got enough going on with move to have more problems with your motors (outboards, vans, hopefully not RV).

[@lakeside5137]

Oh and Happy Belated Birthday

[@THISOLDOUTBOARD1]

Hey. Thanks again !

[@TheSteelworker]

Happy Birthday! The last few minutes of the video tells it all. When it rains it pours….👍

[@JTD1971]

I can’t believe you went through all that for the same plug . Pray to the outboard Gods 😂

[@THISOLDOUTBOARD1]

Me either ! Thanks for tuning in!

[@CaptnGlenn]

🥳 Same day as my wife's! (She not an outboard enthusiast like us, but does like getting out in the boat!) hope you stay "earthed"! 😂

[@THISOLDOUTBOARD1]

Thanks! You too!

[@VernonTate-y1i]

It’s the cadutter valve LOL you can only put it on with a left handed screwdriver I told a young man that in the 1970s he actually went to a dealer and said that to them talk about laughing their asses off great job see you in the next one 👍🏻🤘🏻

[@THISOLDOUTBOARD1]

Hahaha! Hey. Thanks for tuning in!

[@mwatkins2464]

Man you have my kind of luck!! Glad you figured her out take care bud 👍🙏 Ohh and HAPPY BIRTHDAY 🎂🎈🎉 HOPE YOU HAVE A GREAT DAY!!

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@dougvaldivia3395]

happy birthday

[@THISOLDOUTBOARD1]

Thanks !

[@regio81]

if it were easy everyone could do it my friend. wish you the best for your birthday! stay safe and cant wait to see a new background in your new location.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in! Yeah I'm ready for a change!

[@jasonmoore5685]

🏁

[@THISOLDOUTBOARD1]

Thx!

[@timbiffis6306]

Hey Happy Birthday 🎉 !! Love your videos. Boatnet doesnt have service manuals anymore. The site is no longer it seems. Do have another place online to find service manuals? Thanks

[@THISOLDOUTBOARD1]

best bet is ebay- Thanks again !

[@THISOLDOUTBOARD1]

its boats.net not boatnet. check ebay for a good used one, much cheaper!

[@947064m]

check for battery drain remove negative cable from neg batt post take your leads of multi meter one lead on neg post other on neg cable if you get any voltage above 0.25 then, you could start disconnecting connections until you find drain.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in! I think I'm going to replace the entire harness. I might have one laying around. Thanks again !

[@melvinrawlings1457]

First one here. Happy early Birthday brother. Wish I could be there to help ya and celebrate with ya. Keep up the great content. And im sure ur going to miss that place and we will sure miss it as well. It's very sad but sometime that's how life is. But we stay positive and keep moving forward u know. Anyways im not going to bore ya. If I lived closer I would help u out with alot of stuff u got going on with the move and what not. Much love to ya brother from Maryland❤❤❤.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in! Yeah too much to do!

[@JeffRadford-e6n]

Happy Birthday 🎉

[@THISOLDOUTBOARD1]

Thanks !

[@jasper60103]

Happy birthday! 🎉🎈🎂

[@THISOLDOUTBOARD1]

Thank you!!

[@adwyfriangliga8483]

Happy Birthday bro ! 🤗

[@THISOLDOUTBOARD1]

Hey. Thanks !

[@jasonmoore5685]

Pool started😂

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@jasonmoore5685]

I noticed on outboards lot of the small problems on one side😅

[@THISOLDOUTBOARD1]

Thx!

[@OBC-radio]

I thought you're supposed to entirely remove the "pee stream" restrictor as part of the thermostat spring & waterpump update on this era 60/70s? I know I did this on my '93 when i changed the waterpump and she's pissin' at Flomax levels now.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in. Did you do that in 93 or when the service bulletin was put out- Did you move the pee hose to the top of the powerhead too- Did you also rejet your carbs to the larger size jet/high speed orifices- Anyway when I got this old outboard a couple years ago or so and found out about the service bulletin, I checked it and everything had been done except moving the indicator hose to the top. Well I figured this things been running for all these years why change it. The alternative to moving the hose to the top was to use a longer hose and route it over the top- that way you knew the water was flowing high, so I did that just as a precaution. This old outboard has never overheated or set off the alarm buzzer. She's just got a little clog- two of my motors clogged at the same time- the 30 horse and the 60- Weird! Thanks again & Stay Tuned!

[@jato1243]

Hope you had a great birthday! Tried to donate but I don’t have PayPal. Do you do Venmo?

[@THISOLDOUTBOARD1]

Hey. Thanks! That's okay, no I don't have venmo-----Yet! Hahaha- Thanks again !

[@richardvarnold6245]

Voltage is just a measurement, amperage does the work.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@daddski1]

if all else fails friend, you can easily rope start the engine.

[@THISOLDOUTBOARD1]

Thanks !

[@jasonmoore5685]

😎🤓

[@THISOLDOUTBOARD1]

Thanks !

[@davesirvio749]

There is supposed to be a retainer clip on that connctor.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in. Actually on this model there are 2 "sockets" on the block that the plugs coming off the powerpack snap in to- not sure they use the retainers. Anyway, The plug itself wasn't the problem this time like its been the last couple of times. I thought it was crazy that the one end of the starter cable had corroded in such a short time. Never seen that before! Thanks again & Stay Tuned!

[@randykraigbrothers9519]

Check main wires for corrosion

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@alancall5113]

Get a shut off switch or disconnect battery every time a less corrosion

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in! Good Idea!

[@wish2fish37]

Shame your running into issues again.When you tried jumping from the hot supply side of solenoid directly to the starter hot bolt it should have spun it regardless of any switches or bad plug connections if I am not mistaken.No different than taking a wire directly from battery to hot connection on starter,that’s how I have tested starters in the past and just yesterday did that on an old Prestolite starter with jumper cables.Good luck on the move.

[@THISOLDOUTBOARD1]

Hey. Your not mistaken! Crazy stuff! Thanks again !

[@THISOLDOUTBOARD1]

Oh wait til you see what happens next!

[@mikeh8374]

Bad ground or neutral

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@daddski1]

neutral safety switch in the box and at the engine......??? also check the plug, you can get voltage showing through and still have nothing when you turn it over is that plug is messed up inside. Bypass it./

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in! Yeah I'm gonna hot wire that plug!

[@Kyle-bb9zp]

A lot of times some thing simple

[@THISOLDOUTBOARD1]

yep!

[@buddybaumann528]

In gear maybe 😊

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@jasonmoore5685]

It wasn't in park 🤔

[@THISOLDOUTBOARD1]

Thx!

[@rlr4294]

OR order the right starter

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in!

[@t.j.h2810]

Hopefully when moving your motorhome runs better than your boat, that would be a disaster in itself for you.

[@THISOLDOUTBOARD1]

Hey. Thanks for tuning in! Yes, that would be a disaster!

[@randykraigbrothers9519]

Happy birthday

[@THISOLDOUTBOARD1]

Thanks !