92mm MMX throttle body dyno testing

Just testing this thing to see if it will legit make any gains.. its about where i figured it would be on my set up.. ill work on getting a couple and will update the numbers with it and a coupler at a later date.. this still gives a solid indication that it can help improve a combo in need of more air flow.. if you want random updates and like cars, food and women, follow my IG @mackbuilt

[@teammopar771]

Dude youre my hero for doing these test

[@glockmodder]

you have the best comparison videos thanks man i appreciate it!!

[@BuilditRT]

Just found your channel dude! Very informative! New sub!

[@bmasontv]

Nice!

[@youngjuvie8947]

I have same set up on my 6.1 I’m in the process of doing the hellcat Tb but my tuner is having issues on dialing in the Tb he says it goes on limp mode

[@erickchavez1365]

You think a 87mm from mmx can add hp to my cammed scat I have the max effort ??

[@bradysmith3024]

An 85mm is more than enough. You really won't see much after that. The hellcat's 93mm is designed for 12PSI supercharger forcing air in. Lot's of tests have been done by many different tuners. 85 is the best for gains on both lowend and mids and high RPM power and torque.

[@mikew6135]

I'm enjoying your channel. Good stuff

[@captainobvious5993]

So you gained 10 hp and 10 ft lbs of torque with the bigger throttle body

[@OMGITSMRMACK]

16/16 when it was done with a couple and shit

[@TheWrx2002]

@@OMGITSMRMACK Couple and shit?

[@demented392rt5]

@@TheWrx2002 coupler for the intake tube connection over to the throttle body

[@TheGunBub]

So between the leg maker and the jlt you like the Jlt better? I have the afe pro momentum gt with the Hellcat tube

[@OMGITSMRMACK]

Yup. Short big tubes with a shield for heat and a good radius before tb is key. Ait don't like to turn and at a certain hp level the length of tube matters a ton too.

[@Indigeaux797]

Great video and test.

[@zayjeff7053]

Will the hellcat throttle body work on the 2015 5.7 HEMI?

[@joshuanunez6090]

What type of tunes did you get on your 6.1

[@nationalhealthplansinc4999]

what are the mods you did to your 6.1

[@OMGITSMRMACK]

Heads, cam, ported intake, Tb, leg maker, long tubes and tuning

[@cudaman2formula874]

@@OMGITSMRMACK Did you port the heads or get After market heads?

[@eunit08]

Nice data

[@fknmonty]

What are the mods?

[@M.e0305]

Hey ! Where did u buy your intake adapter from ?

[@OMGITSMRMACK]

MMX.. its in the title boss

[@lizardking_7]

What springs or coilovers? Like how the rear sits. Mine still isn’t low enough with the H&R’s.

[@OMGITSMRMACK]

Dyno straps pulling it down alot. Usually sits with just about a 1/4" gap.. but I strap the hell out of it so it dont spin at all when it hits.. it actually was at one point lol.. pzeros ain't the best tires.

[@Cheofit_]

👍 I damaged my factory 80 mm do you recommend 90 mm in the 5.7 or 85

[@OMGITSMRMACK]

Factory if it dont have much going on honestly.. I had everything I could do in this thing.. without it moving alot of air and asking for more air flow.. it won't even make power.. with that said.. if you have a cam.. if anything the larger ones drive better.

[@Edsrt-]

👍👍👍👍👍

[@FerRod2113]

That was badass! Lol