#97 Gluing Bails - 7 Easy Steps

I quickly show you how I glue bails onto my fused glass jewelry. I have shown this within other videos but wanted to make a separate video that would be easy to find.
Look for the hidden bunny!
My Class Website - I will add a link here once my class website when it's up & running. Check back.
STEPS
1. Etch the glass where the bail will be applied. Use any etching tool & bit.
2. Clean off the glass dust with a damp cloth.
3. Apply E-6000 glue to the bail pad.
4. Press etched glass into the bail with glue.
5. Press bail & center the bail on the glass pendant.
6. Allow it to dry for 24 hours on a level surface.
7. Heat in an oven or kiln to set the glue. 270˚F (130˚C) for 20 minutes.
Once it's completely cool it's ready to wear.
To see more of my videos click on my name to go to my channel, then click on the "videos" tab. If you want to be notified when new videos are posted click "subscribe" and click the little bell next to it.
Be Cool Honey Bunnies
*************************************************************************
www.amazon.com...
I LOVE my Amazon shop
The links above are for the products mentioned in my videos. By using these affiliate links you help me earn a small commission at no extra charge to you. Thanks so much.
My mind is full of ideas!
I enjoy making these videos for you and by subscribing, liking and sharing it encourages me to make more.
If you have any questions or comments feel free to comment on the video or message me thru Facebook, Susan McGarry Glass.
Follow me on Instagram & Facebook - Susan McGarry Glass
Join the Facebook group Fused Glass Master Minds
Thanks for watching! Be Cool Honey Bunny!
Susan McGarry

[@sallyjoligocki5011]

Thank you! I didn't know about the baking. Thank you for sharing.

[@shastastan1935]

Thanks, Susan. This was very helpful to newbie me just getting started with cabochon necklaces. I like that you don't use music or add any "fluff" to your video,too.

[@SusanMcGarryGlass]

Thanks. I try to make videos that I would want to watch.

[@mywifetheartist]

Thanks for sharing. Great information. ❤❤❤

[@dorothywoods2541]

Very helpful. Many thanks.

[@theartisancompany]

TFS!

[@SusanMcGarryGlass]

You are so welcome

[@carlboone5936]

Thanks for sharing this Susan. I never thought of a taking a “production line” approach and was doing one at a time which I now see is very inefficient.

[@CaptMike]

Nice video Susan!

[@neonblowfish]

I've never run into needing to bake e6000 after curing for 24hrs. What led you to doing that, maybe there's an issue I haven't experienced yet? Thanks much!I

[@rtd217]

Thank you so much! I was putting the glue on the pendent and was getting an awful mess.

[@SamanthaJohnsonBrown-bz5bu]

Thank you for sharing this. It’s so simple but so informative. I need to find some E6000 glue now - I’m in the UK so not sure if I can get it here!

[@starvingartistscollective]

Would never have thought to bake the glue for 20 mins to strengthen the bond!! TFS!!

[@neonblowfish]

E6000 is only rated to intermittent exposure of 180F. Any temperature beyond that is likely weakening the bond, which is typical for these types of adhesives, heat actually softens the material. You might not see a breakdown in the bond because jewelry doesn't put the bond under much of a load. E6000 has a peel strength of 34 pounds per linear inch, likely a lot less at 270F. Baking E6000 does not provide any benefits to bond strength, in fact it's just the opposite. Follow the manufacturers directions for proper use.

[@judithae7381]

Thank you so much, you gave some very valuable tips: the grinding, the arrangement of all the components , the manner of sliding the glass on the bail, and the "mass production". Thanks for your generous sharing of your expertise❤

[@sharonrae6869]

If I am gluing the bail onto a ceramic or polymer clay piece, would I still do the baking part?

[@SusanMcGarryGlass]

Great question. I’ve never tested ceramic or poly clay. But I would guess that ceramic would be similar because the glaze is essentially a glass coating. But I don’t think it’s necessary to bake it onto the poly clay and baking them may damage the finish.

[@nikoliniolnc]

Why to put in oven? Stronger?

[@SusanMcGarryGlass]

It does make it stronger somehow.

[@nikoliniolnc]

@@SusanMcGarryGlass thank you 🌺🌺💚💚🇨🇾🇨🇾

[@audreycuvilier9463]

If using with seaglass, same procedure re baking?

[@SusanMcGarryGlass]

Yes

[@ManiacalMangoes]

What kind of chains/ropes would you recommend to pair with these for a necklace for a male?

[@SusanMcGarryGlass]

A leather cord would be nice. Or a chunky silver chain.

[@ManiacalMangoes]

Thank you! I went with the leather cord per your suggestion, about to assemble them today. Cant wait!

[@Serenitywomensministry2023]

Why do you heat the bezels?

[@SusanMcGarryGlass]

I’ve found it makes the glue stronger. I’ve tested many adhesives & techniques & this one works the best for me.

[@rtd217]

Thank you so much! I was putting the glue on the pendent and was getting an awful mess.